T36 电子、电气设备 标准查询与下载

NF R13-716-1:2004 道路车辆.与排放诊断相关的车辆和外部设备间的交流.第1部分:一般信息

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 1 : general information.

ISO/TR 15031-2:2004 道路车辆.与排放相关的诊断用车辆和外部设备间的通信.第2部分:术语、定义、缩略语和缩语

This part of ISO 15031 is a guide to terms, definitions, abbreviations and acronyms used in emissions-related diagnostics, with respect to the communication between road vehicles and external equipment used in that field. It also specifies a procedure for constructing new terms. As it gives recommended usage of diagnostic terms applicable to electrical/electronic systems, it also makes reference to related mechanical terms, definitions, abbreviations, and acronyms.

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 2: Terms, definitions, abbreviations and acronyms

ISO 16844-4:2004 道路车辆.速度记录器系统.第4部分:CAN接口

This part of ISO 16844 specifies the CAN (controller area network) interface for the interchange — performed in accordance ISO 16844-6 — of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. It specifies parameters of, and requirements for, the physical and data link layers of the electrical connection used in the electronic systems.

Road vehicles - Tachograph systems - Part 4: CAN interface

SAE J2678-2004 驱动时导航和航线指导功能可达性

This Recommended Practice applies to both Original Equipment Manufacturer and aftermarket route guidance and navigation system functions for passenger vehicles. It establishes two alternative procedures, a static method and an interrupted vision method, for determining which navigation and route guidance functions should be accessible to the driver while the vehicle is in motion. These methods apply only to the presentation of visual information and the use of manual control inputs to accomplish a navigation or route guidance task.

Navigation and Route Guidance Function Accessibility While Driving Rationale

ISO 16844-5:2004 道路车辆.速度记录器系统.第5部分:安全的CAN接口

This part of ISO 16844 specifies the secured interchange of digital information between a road vehicle's tachograph system and vehicle units, and within the tachograph system itself. This type of interchange will be used for CAN communication or diagnostic services on CAN (controller area network), where there is need to protect interchanged parameters against fraud.

Road vehicles - Tachograph systems - Part 5: Secured CAN interface

DIN 72588:2004 道路车辆.使用手工压接工具装配薄绝缘壁厚度的低张力电缆用开口卷边桶

The following items are covered: Dimensions, test methods, requirements, notes#,,#

Road vehicles - Open crimp barrels for assembling low-tension cables of thin insulation wall thickness by hand crimping tools

ISO 16844-7:2004 道路车辆.速度记录器系统.第7部分:参数

This part of ISO 16844 specifies the parameters used in the interchange of digital information between a road vehicle's tachograph system and vehicle units or a diagnostic tester, or within the tachograph system itself. The parameters are applicable for real time communication and/or diagnostic services.

Road vehicles - Tachograph systems - Part 7: Parameters

ISO 16844-6:2004 道路车辆.速度记录器系统.第6部分:诊断

This part of ISO 16844 specifies diagnostic communication and services in tachograph systems used in road vehicles, for both the controller area network (CAN) and K-line communication modes. It is also applicable for programming purposes. NOTE The diagnostic services base according to ISO 14229-1 and most services are common to the two communication modes, CAN and K-line. With CAN, however, there is no need for a service to start the communication, as the electronic control unit (ECU) always starts in the standard diagnostic session.

Road vehicles - Tachograph systems - Part 6: Diagnostics

ARMY MIL-H-51391 B VALID NOTICE 2 CONT. DIST.-2004 电喇叭

This commercial item description covers brown kraft paper used for general wrapping applications.

HORN, ELECTRICAL

BS ISO 6969:2004 道路车辆.声音信号设备.车辆安装后的试验

This International Standard specifies the testing of sound signalling devices in accordance with ISO 512, to be carried out after mounting on the vehicle.

Road vehicles. Sound signalling devices. Tests after mounting on vehicle

ISO 6969:2004 道路车辆.音响信号装置.装车后的试验

This International Standard specifies the testing of sound signalling devices in accordance with ISO 512, to be carried out after mounting on the vehicle.

Road vehicles - Sound signalling devices - Tests after mounting on vehicle

ISO 15031-3:2004 道路车辆.排放相关的诊断用车辆和外部设备之间的通信.第3部分:诊断连接器和相关电路的规范及使用

This part of ISO 15031 specifies a minimum set of requirements for a diagnostic connector used in communication between vehicle and external equipment for emissions-related diagnostics. Its aim is to promote the use of a common diagnostic connector throughout the motor vehicle industry. The diagnostic connection consists of two mating connectors, the vehicle connector and the external test equipment connector. Applicable to all types of road vehicles, the connector specified has no positive locking feature and is intended for short-term diagnostic connection only. This part of ISO 15031 specifies functional requirements for a) the vehicle connector, separated into the four principal areas of 1) connector location/access, 2) connector design, 3) connector contact allocation, and 4) electrical requirements for connector and related electrical circuits, and b) the external test equipment connector, separated into the three principal areas of 1) connector design, 2) connector contact allocation, and 3) electrical requirements for connector and related electrical circuits. The dimensional requirements of the vehicle connector are given as a minimum specification, to allow design freedom.

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 3: Diagnostic connector and related electrical circuits, specification and use

ISO 17386:2004 交通信息和控制系统.低速操作用机动辅助装置.性能要求和试验过程

This International Standard for Manoeuvring Aids for Low Speed Operation addresses light-duty vehicles, e.g. passenger cars, pick-up trucks, light vans and sport utility vehicles (motorcycles excluded) equipped with such MALSO systems. It specifies minimum functionality requirements which the driver can generally expect of the device; i.e., detection of and information on the presence of relevant obstacles within a defined (short) detection range. It defines minimum requirements for failure indication as well as performance test procedures; it includes rules for the general information strategy but does not restrict the kind of information or display system. MALSO systems use object-detection devices (sensors) for ranging in order to provide the driver with information based on the distance to obstacles. The sensing technology is not addressed; however, technology affects the performance-test procedures set up in this International Standard (refer to Clause 7). The current test objects are defined based on systems using ultrasonic sensors, which reflect the most commonly used technology at the time of editing this International Standard. For other sensing technologies possibly coming up in the future, these test objects shall be checked and changed if required. Visibility-enhancement systems like video-camera aids without distance ranging and warning are not covered by this International Standard. Reversing aids and obstacle-detection devices on heavy commercial vehicles are not addressed by this International Standard; requirements for those systems are defined in ISO/TR 12155.

Transport information and control systems - Manoeuvring Aids for Low Speed Operation (MALSO) - Performance requirements and test procedures

GM3803M-2004 密封条不会被用于将来的项目.代替:GMN11018[被代替:GMNA GMN11018,GMNA GMN11018]

Unberchadet eiwaiger dur& den Abnehmer erfolgenden Stichprobenprüfungsn tragt der üefemnt die Veranhvortung dafür, daí3 die gelieferte Ware die Opel-Zeidmungnonchdftan erfüllt. Mudem sowie Teilen einer ersten Sorienlieferung Ist unaufgefordert ein Prüfbe

Weatherstrips Revision F; Not To Be Used On Future Programs - Replaced By GMN11018

SANS 1327:2004 牵引车和半挂车用电气接插件（7针接插件）

Covers two types of 7-pole electrical connectors in the form of a socket and a plug that will permit interchangeability of electrical connections for towing vehicles and towed vehicles having electrical equipment operating at nominal voltages of 6, 12, o

Electrical connectors for towing and towed vehicles (7-pole connectors)

BS EN 62196-1:2003 电气机车输入端和机车连接器用插头和插座.电气机车传导冲电.250A交流和400A直流及以下的电气机车充电

This part of IEC 62196 is applicable to plugs, socket-outlets, connectors, inlets and cable assemblies for electric vehicles, intended for use in conductive charging systems which incorporate control means, with a rated operating voltage not exceeding: - 690 V a.c, 50 - 60 Hz, at a rated current not exceeding 250 A; - 600 V d.c, at a rated current not exceeding 400 A. These accessories and cable assemblies are intended to be used for circuits specified in IEC 61851-1 which operate at different voltages and frequencies and which may include ELV and communication signals. These accessories and cable assemblies are to be used in an ambient temperature of between -30 ℃ and +50 ℃. In some countries, other requirements may apply. These accessories are intended to be connected only to cables with copper or copper-alloy conductors. The accessories covered by this standard are for use in certain modes of charging EV's. These modes are defined in IEC 61851-1. These definitions and a description of the types of connection (cases A, B and C), also described in IEC 61851-1, are reproduced herein as Annex A. Table 1 illustrates the types of accessories (B, U32, UA, UD) permitted for each charging situation (mode and case) and identifies where it is mandatory to use the accessories covered by this standard. These are indicated by the entries in the columns headed "62196" in Table 1. The table also describes situations in which either an accessory covered by this standard, or other standardized accessories, are permitted to be used. They are identified by an entry in the column headed "62196" and the word "Any" under the column headed "Type". This standard does not apply to those standardised accessories used in charging systems where the use of such accessories constructed to the requirements of other standards is permitted (e.g. in mode 1 and mode 2). Such standardized accessories may be used for those situations (mode and case) identified in Table 1 by the word "Any" under the column headed "Type" and with no corresponding entry under the column headed "62196". This standard can be used as a guide for accessories with a lesser number of contacts and lower ratings for use with light duty vehicles.

Plugs, socket-outlets, vehicle couplers and vehicle inlets - Conductive charging of electric vehicles - Part 1:Charging of electric vehicles up to 250 A a.c. and 400 A d.c.

ISO 10483-1:2004 道路车辆.智能动力开关.第1部分:高侧智能动力开关

This part of ISO 10483 specifies the minimum requirements for high-side intelligent power switches (HSIPS) installed on road vehicles with 12 V or 24 V nominal supply voltage. These switches are intended primarily for automotive applications (lamps, motors, relays, etc.). The numerical values in parentheses refer to 24 V nominal vehicle supply voltage systems.

Road vehicles - Intelligent power switches - Part 1: High-side intelligent power switch

ISO 16844-2:2004 道路车辆.转速表系统.第2部分:记录设备电子接口

This part of ISO 16844 specifies the electrical connection between the recording unit, and the vehicle network and motion sensor, in tachograph systems used in road vehicles.

Road vehicles - Tachograph systems - Part 2: Recording unit, electrical interface

QC/T 708-2004 汽车空调风机技术条件

本标准规定了汽车空调机(蒸发风机、冷凝风机)的术语和定义、要求、试验方法、检验规则、标志、包装、贮存和保管。 　　本标准适用于汽车空调装置上驱动负载排出热量或送出冷气的风机。

Technical specification of blower of air conditioner for motor vehicles

QC/T 420-2004 汽车用熔断器

本标准规定了汽车用熔断器的术语和定义、分类、要求、试验方法、检验规则、标志、包装、贮存和保管。 　　本标准适用于电压在32V以下，用于汽车电器设备的短路或过载保护的熔断器。

Fuse-links for motor vehicles