T40 汽车综合 标准查询与下载

KS R ISO 2347:2001 道路车辆.有锥形底座的M14×1.25火花塞和汽缸盖体

이 규격은 불꽃 점화 기관에 사용되는 M14×1.25 원추 시트형의 컴팩트 점화 플러그와

Road vehicles-M14×1.25 compact spark-plugs with conical seatingand their cylinder head housing

KS R ISO 2346:2001 道路车辆.带平底座的19mm六角形的M14×1.25小型火花塞及其汽缸盖座孔

이 규격은 불꽃 점화 기관에 사용되는 평면 시트형의 컴팩트 점화 플러그와 실린더 헤드 하우

Road vehicles-M14×1.25 compact spark-plugs with flat seatingand their cylinder head housing

ISO 7650:1987/Amd 1:2001 商用车辆和公共汽车 1、2、3和4型起动电机的装配尺寸 修改1

This is Amendment 1 to ISO 7650-2001 ISO 7650-1987 (Commercial vehicles and buses —Mounting dimensions for starter motors oftypes 1, 2, 3 and 4 AMENDMENT 1)

Commercial vehicles and buses - Mounting dimensions for starter motors of types 1, 2, 3 and 4; Amendment 1

SAE J2548-2001 重载卡车和公共汽车引擎的凸缘扭矩数据获得的试验方法

This SAE Recommended Practice applies to all forms of diesel and natural gas engines fueled by the combination of diesel fuel and natural gas. This document provides a method to determine the torque generating capability of an engine as it accelerates away from idle at a specified acceleration rate. The data is typically used to aid in the proper matching of the engine to the available torque converters of a torque converter equipped transmission. This goal is to achieve acceptable off-idle transient engine acceleration against the load of a torque converter equipped vehicle as it moves away from a stop.

Test Method to Obtain Lug-Up Torque Data for Heavy-Duty Truck and Bus Engines

SAE J1144-2000 牵引车动力传动系统测试程序乘用车、厢式货车和轻型卡车

This SAE Recommended Practice provides a means for evaluating the drivetrain of the passenger car, van, or light-duty truck being towed under a variety of road conditions. The towing equipment used is explained in SAE J1142.

Towed Vehicle Drivetrain Test Procedure Passenger Cars, Vans, and Light-Duty Trucks

ISO 14791:2000 道路车辆 重型商用列车和铰接式大客车 横向稳定性试验方法

This International Standard specifies test methods to determine the lateral stability of heavy commercial vehicle combinations as defined in ISO 3833, including truck centre-axle trailer combinations and articulated buses. It is applicable to trucks and trailers having a mass exceeding 3,5t and buses having a mass exceeding 5t, i.e. vehicle categories N2, N3, O3, O4 and M3 according to 92/53/EEC. The manoeuvres specified in these test methods are not fully representative of real driving conditions, but are useful for determining the lateral stability of a heavy vehicle combination.

Road vehicles - Heavy commercial vehicle combinations and articulated buses - Lateral stability test methods

BS ISO 3888-1:1999 客车.急剧改变车道的操纵用试验车道.第1部分:两车道变换

This part of ISO 3888 specifies the dimensions of the test track for a closed-loop test method to subjectively determine a double lane-change which is one part of the vehicle dynamics and road-holding ability of passenger cars. It is applicable to passenger cars as defined in ISO 3833. It is also applicable to light commercial vehicles up to a gross vehicle mass of 3,5t.

Passenger cars - Test track for a severe lane-change manoeuvre - Double-lane change

SH 0521-1999 汽车及轻负荷发动机用乙二醇型冷却液

Standard specification for ethylene glycol base engine coolant for automobile and light duty service

CSA Z240 RV SERIES-99-1999 休闲娱乐用车.第2合并版本

Recreational Vehicles Second Consolidated Edition

Recreational Vehicles Second Consolidated Edition

SAE J695-1998 回旋能力及跑偏.机动车辆

This SAE Recommended Practice sets forth a method by which the turning ability and off tracking of motor vehicles can be determined.

Turning Ability and Off Tracking—Motor Vehicles

SANS 10212:1998 路边机动车的车辆性能评估

Establishes the methods to be used in, and the extent of, the examination of motor vehicles that are subjected to a roadside assessment for roadworthiness by traffic authorities.

The roadside roadworthiness assessment of motor vehicles

DIN ISO 9815:1997 道路车辆.客车/拖车组合.横向稳定试验

The document specifies a test procedure to determine the damping characteristic of trailer oscillation excited by a defined steering impulse. The passenger car/trailer combination is initially driven in a straight line and its response to a specified steering input, the steering-wheel is held fixed in the straight ahead position. Tests are conducted at several constant speeds, which shall be increased in discrete intervals.

Road vehicles - Passenger car/trailer combinations - Lateral stability test (ISO 9815:1992)

ARMY A-A-52162 A-1996 商用灵车

This CID covers a commercial hearse, utilizing a commercial limousine chassis, gasoline engine powered and commercial cowl, with a hearse body conforming generally to the automobile manufacturer’s style.

AUTOMOBILE, HEARSE: COMMERCIAL

CJ/T 5021-1995 轻轨交通车辆通用技术条件

General specifications for light rail traffic vehicles

GSA FED-STD-794 M-1995 货车和牵引车:中型商业4X2和4X4,7,250到16,000 KG(16,000到35,000 LBS) GVW

TRUCKS AND TRUCK TRACTORS: MEDIUM COMMERCIAL 4X2& 4X4, 7,250 TO 16,000 KG (16,000 TO 35,000 LBS) GVW

TRUCKS AND TRUCK TRACTORS: MEDIUM COMMERCIAL 4X2& 4X4, 7,250 TO 16,000 KG (16,000 TO 35,000 LBS) GVW

SAE J1142-1994 (R)乘用车,有篷货车和轻型卡车牵引能力设计标准和设备使用推荐实施规程.1994年2月

This SAE Recommended Practice describes the type of equipment commonly used with towing equipment, provides information to calculate safe steering loads, and outlines design criteria.

(R) Towability Design Criteria and Equipment Use - Passenger Cars, Vans, and Light-Duty Trucks, Recommended Practice February 1994

JIS D 4705:1993 公共汽车.目的地指示标志

この規格は，バスに使用する電動式の方向幕巻取器(以下，巻取器という。)について規定する。

Buses -- Destination indicators

DIN 70020-1:1993 汽车.载重车结构.尺寸术语

The document contains terms and codes for dimensions of passenger cars.

Road vehicles; automotive engineering; dimensional terms

ISO 9815:1992 客车/拖车组合.横向稳定试验

Passenger car/trailer combinations; lateral stability test

QC/T 34-1992 汽车的故障模式及分类

本标准规定了汽车故障的确认原则、故障模式及故障分类。 　　本标准适用于各类汽车。

Failure Modes and Classifications of Automobiles