T47 新能源汽车及其他类型汽车 标准查询与下载



共找到 409 条与 新能源汽车及其他类型汽车 相关的标准,共 28

Electrically propelled road vehicles - Safety specifications - On-board rechargeable energy storage system (RESS)

ICS
43.120
CCS
T47
发布
2009-10-31
实施
2009-10-31

本规范规定了采用水电解制氢技术制取氢气的野战制氢车(以下简称制氢车)的通用要求。 本规范适用于各种制氢车的研制、生产、检验和验收。

General specification for field hydrogen production vehicles

ICS
CCS
T47
发布
2009-05-25
实施
2009-08-01

This SAE Recommended Practice identifies and defines the preferred technical guidelines relating to the safe integration of fuel cell system, the hydrogen fuel storage and handling systems as defined and specified in SAE J 2579, and electrical systems into the overall fuel cell vehicle. The purpose of this document is to provide mechanical and electrical system safety guidelines, safety crieteria and methodologies that should be considered when designing fuel cell vehicles for use on public roads. This document covers fuel cell vehicles designed for use on public roads.

Recommended Practice for General Fuel Cell Vehicle Safety

ICS
43.060.40
CCS
T47
发布
2009-01-12
实施
2014-08-29

The purpose of this document is to define design, construction, operational, and maintenance requirements for hydrogenfuel storage and handling systems in on-road vehicles.Performance-based requirements for verification of design prototype and production hydrogen storage and handlingsystems are also defined in this document. Complementary test protocols (for use in type approval or self-certification) toqualify designs (and/or production) as meeting the specified performance requirements are described.Crashworthiness of hydrogen storage and handling systems is beyond the scope of this document. SAE J2578 includesrequirements relating to crashworthiness and vehicle integration for fuel cell vehicles. It defines recommended practicesrelated to the integration of hydrogen storage and handling systems, fuel cell system, and electrical systems into theoverall Fuel Cell Vehicle.

Technical Information Report for Fuel Systems in Fuel Cell and Other Hydrogen Vehicles

ICS
43.120
CCS
T47
发布
2009-01-06
实施
2009-01-09

이 표준은 주로 주택의 급탕에 사용하는 태양열 온수기(이하 온수기라 한다.)에 대하여 규정

Solar hot water heater for dwellings

ICS
27.16
CCS
T47
发布
2008-12-22
实施
2008-12-22

This SAE Recommended Practice establishes uniform procedures for testing fuel cell and hybrid fuel cell electric vehicles, excluding low speed vehicles, designed primarily for operation on the public streets, roads and highways. The procedure addresses those vehicles under test using compressed hydrogen gas supplied by an off-board source or stored and supplied as a compressed gas onboard. This practice provides standard tests that will allow for determination of fuel consumption and range based on the US Federal Emission Test Procedures, using the Urban Dynamometer Driving Schedule (UDDS) and the Highway Fuel Economy Driving Schedule (HFEDS). Chassis dynamometer test procedures are specified in this document to eliminate the test-to-test variations inherent with track testing, and to adhere to standard industry practice for fuel consumption and range testing. Communication between vehicle manufacturer and the governing authority is essential when starting official manufacturer in-house and official government confirmatory testing that incorporates this practice.

Recommended Practice for Measuring Fuel Consumption and Range of Fuel Cell and Hybrid Fuel Cell Vehicles Fuelled by Compressed Gaseous Hydrogen

ICS
43.060.40
CCS
T47
发布
2008-10-27
实施
2014-10-21

Fuel cell road vehicles - Maximum speed measurement

ICS
43.120
CCS
T47
发布
2008-10
实施

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered medium, heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.1.1 PurposeThe purpose of this document is to establish a uniform practice for construction, operation, and maintenance of LNG powered vehicles and is subject to change to keep pace with experience and technical advances. The revised FailureModes and Effects Analysis (FMEA) which influences this document is a separate document, available in part as an informative appendix (Appendix B).

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

ICS
43.080.10
CCS
T47
发布
2008-07-01
实施
2018-02-14

This Technical Specification applies to the communication data link between external charger and electric road vehicle for the charging procedure, using the most common communication link. This Part 2 applies to communication data link between the off-board charging system with direct current and electric road vehicles. The aspects covered are the physical layer, the data link layer and the communication applicative layer. This Technical Specification does not cover communication between dedicated off-board charger and their electric vehicle. Annex A gives an example of normal operation.

Conductive charging for electric vehicles - Part 2: Communication protocol between off-board charger and electric vehicle

ICS
35.240.60;43.120
CCS
T47
发布
2008-03
实施

This Technical Specification, together with EN 61851-1, gives the requirements for d.c. electric vehicle charging stations for conductive connection to the vehicle, with an a.c. supply voltage per IEC 60038, up to 690 V. This Technical Specification does not cover all safety aspects related to maintenance. This Technical Specification is not applicable to dedicated off-board charger.

Conductive charging for electric vehicles — Part 1: D.C. charging station

ICS
43.120
CCS
T47
发布
2008-03
实施

This publication presents safe practices recommended for the design, construction, and operation of mobile acetylene trailer systems (MATS) containing acetylene cylinders manifolded for the purposes of charging, transporting, and discharging large quantities of acetylene. It also covers ground-mounted auxiliary equipment used in conjunction with the MATS such as piping, regulators, flash arrestors, and meters.

Recommended practices for mobile acetylene trailer systems

ICS
CCS
T47
发布
2008
实施

This SAE Recommended Practice provides guidance for the construction, operation, and maintenance of LNG powered heavy-duty vehicles and all LNG vehicles used for public transit or commercial applications.. The purpose of this document is to establish a uniform practice for construction, operation, and maintenance of LNG powered vehicles and is subject to change to keep pace with experience and technical advances. The revised Failure Modes and Effect Analysis (FMEA) which influences this document is a separate document, available in part as an informative appendix.

Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles

ICS
43.080.10
CCS
T47
发布
2007-11-27
实施
2008-07-03

Autobus Scolaires Huitième Edition

School Buses Eighth Edition

ICS
CCS
T47
发布
2007-09-01
实施

Natural Gas Vehicle Containers

Natural Gas Vehicle Containers

ICS
CCS
T47
发布
2007-07-01
实施

This document describes a test procedure for rating peak power of the Rechargeable Energy Storage System (RESS) used in a combustion engine Hybrid Electric Vehicle (HEV). Other types of vehicles with non fossil fuel primary engines, such as fuel cells, are not intended to use this test procedure. The purpose of this document is to provide a test procedure to determine RESS peak power so that a vehicle's ratio of RESS peak power rating to the sum of the Internal Combustion Engine power rating and the RESS peak power rating can be established. Because of the vehicle-specific nature of the RESS control and environment, this test is designed to calculate the RESS peak power for a specific vehicle. As a result, the same RESS used in a different vehicle must be retested to determine its peak power rating in the new HEV environment.

Determination of the Maximum Available Power from a Rechargeable Energy Storage System on a Hybrid Electric Vehicle

ICS
43.120
CCS
T47
发布
2007-04-01
实施
2018-12-13

Pressure Relief Devices for Compressed Natural Gas Vehicle (NGV) Fuel Containers

Pressure Relief Devices for Compressed Natural Gas Vehicle (NGV) Fuel Containers

ICS
CCS
T47
发布
2007-01-01
实施

This SAE Information Report provides basic information about the issues surrounding the administration of stationary, infield sound testing of snowmobiles. The information provided herein is meant to enhance safety, improve the environment and promote uniform testing. The purpose of this document is to identify problems in the administration and in safety of infield, snowmobile stationary sound testing, as described in SAE J2567.

Stationary Sound Testing of Snowmobiles, Procedure and Enforcement Issues

ICS
17.140.30
CCS
T47
发布
2007
实施

This SAE Information Report provides performance and test requirements for combination pelvic/upper torso operator restraint systems provided for off-road self-propelled work machines. This document applies to 3-point and 4-point operator restraint systems (Type 2 and Type 2A) for off-road, self-propelled work machines fitted with ROPS.

Combination Pelvic/Upper Torso (Type 2) Operator Restraint Systems for Off-Road Work Machines

ICS
43.080.99
CCS
T47
发布
2006-12-01
实施

Covers the provisions for the specific equipment of motor vehicles that use liquefied petroleum gases in their propulsion system, and provisions for the installation of such equipment.

Uniform provisions concerning I. approval of specific equipment of motor vehicles using liquefied petroleum gases in their propulsion system; II. approval of a vehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsi

ICS
43.060.40
CCS
T47
发布
2006-11-24
实施

This SAE Standard applies to self-propelled sweepers and scrubbers as defined in SAE J2130. The purpose of the document is to provide uniform methods for determining the capacity of debris hoppers and fluid tanks used on self-propelled sweepers and scrubbers. The methods declared result in realistic useable volume measures.

Self-Propelled Sweepers and Scrubbers Tank and Hopper Capacity Rating

ICS
43.160
CCS
T47
发布
2006-10-01
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号