U22 甲板机械 标准查询与下载

NAVY MIL-STD-1322-806 NOTICE 2-1987 M2A1弹药MK4MOD3或CXU-3 A/B装箱练习信号炸弹弹药筒装船国内及海外单位装载

Hazard Classification. Qiarcre Mk 4-3 CG Class fm i to IIC.

UNIT LOAD FOR DOMESTIC& OVERSEAS SHIPMENT CARTRIDGE, SIGNAL, PRACTICE BOMB MK 4 MOD 3 OR CXU-3 A/B IN BOX, AMMUNITION M2A1

ANSI/ASTM F1106:1987 手动拉绳的、正面朝上的卷缆铰盘规范

This specification covers warping heads used with windlass, winch, and capstan drive units to pull rope on board ships. Warping heads are primarily for use with fiber rope, natural, or synthetic. Warping heads with external ribs or whelps on the barrel, notched flanges, attached storage drums, unfinished drums, or non heat-treated fabrications, are considered special and are permitted within the scope of this specification when fully described under special ordering information. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

ASTM F1106-87(2006) 绞缆筒装置(绞绳筒,绞盘架)

1.1 This specification covers warping heads used with windlass, winch, and capstan drive units to pull rope on board ships. Warping heads are primarily for use with fiber rope, natural, or synthetic.1.2 Warping heads with external ribs or whelps on the barrel, notched flanges, attached storage drums, unfinished drums, or non heat-treated fabrications, are considered special and are permitted within the scope of this specification when fully described under special ordering information.1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

ISO 4568:1986 造船 海船 起锚机和起锚绞盘

Specifies requirements for the design, construction, safety, performance, and acceptance tests of windlasses and anchor capstans having electric, hydraulic, steam or external drive.

Shipbuilding; Sea-going vessels; Windlasses and anchor capstans

ARMY MIL-R-52899 B-1986 载货汽车甲板

This specification covers a lightweight portable loading ramp which is used in conjunction with 4000-pound capacity, rough terrain and depot forklift trucks for loading and unloading between the, ground and the floors of MILVANS and refrigerated containers.

RAMP: LOADING VEHICLE

DIN ISO 7364:1985 造船海上结构.甲板机械.舷梯绞车

The winches equipped with electric, hydraulic or pneumatic drive or unpowered winches are provided for hoisting, lowering and holding of accomodation ladders. The requirements according to these functions refer to the type of winch including several design details, as well as to the strength of component parts, the safety of operation and to the required power. Moreover, conditions for the acceptance tests of accomendation ladder winches are stated.#,,#

Shipbuilding and marine structures; deck machinery; accommodation ladder winches; identical with ISO 7364, edition 1983

DIN 84155:1985 造船.缆索制动器

Shipbuilding; cable stoppers

ISO 7825:1985 造船 甲板机械 通用要求

Specifies the characteristics common to all deck machinery of any type not detailed in the relevant specific International Standards. If in any items this Standard contradicts the specific International Standard, it shall be overruled by the specific International Standard.

Shipbuilding; Deck machinery; General requirements

HY/T 013-1992 手摇绞车

hand winch

NAVY A-A-50357 A-1985 潜水艇甲板用鞋

Purchaser should specify sizes required.

SHOE, SUBMARINE DECK

CB* 3239-1984 交流电动起锚和系泊机械控制设备技术条件

本标准适用于交流50Hz额定工作电压至380V及60Hz额定工作电压至440V以下船用三相交流变极调速电动起锚机、起锚绞盘，系泊绞车、起锚系缆两用机和绞缆机等起锚和系泊机械的控制设备。对具有其他拖动形式的锚机电气控制设备，除特殊要求外，也应符合本标准的规定。

Specifications for AC electric anchor and mooring machinery control equipment

ARMY MIL-A-46186-1984 高质量高浓度焊接钢装甲板

This specification covers materials requirements for quenched and tempered high-strength wrought steel armar plate for lightweight armor applications(up to l/2")(see 6.1 and 6.3).

ARMOR PLATE, STEEL, WROUGHT, HIGH-STRENGTH, HIGH-QUALITY

ISO 6219:1983 造船 内河船舶 起锚机和起锚绞车

Specifies the requirements for the design, construction, safety, performance and acceptance testing of windlasses and capstans having electric, hydraulic, steam or external drive.

Shipbuilding; Inland vessels; Windlasses and anchor capstans

CB* 3135-1983 工作艇绞车

本标准规定了手摇式和重力式(机械储能式)艇架的放艇、收艇及翻艇用绞车的设计、结构、安全、性能及验收试验的要求。

work boat winch

CB* 3150-1983 船用地质绞车

本标准适用于海洋调查船和其他船舶上作收、放地质采样仪器用的电动和电动液压驱动的地质绞车。 本标准不包括对绞车原动机的要求。

Marine Geological Winches

ISO 7364:1983 造船及海上结构物 甲板机械 舷梯绞车

Specifies requirements and characteristics of lightly powered winches provided with electric, hydraulic or pneumatic drive, and unpowered winches. Does not include requirements for the prime mover used to operate the winch.

Shipbuilding and marine structures - Deck machinery - Accommodation ladder winches

NAVY MIL-HDBK-236 T-1983 卡车装载,铁路装载及集装箱装载危险物品的标准索引

INDEX TO STANDARDS FOR PALLETIZING, TRUCK LOADING, RAILCAR LOADING AND CONTAINER LOADING OF HAZARDOUS MATERIALS

INDEX TO STANDARDS FOR PALLETIZING, TRUCK LOADING, RAILCAR LOADING AND CONTAINER LOADING OF HAZARDOUS MATERIALS

CB* 3118-1982 工程船液压绞车系列

Engineering ship hydraulic winch series

CB* 3128-1982 水文绞车

本际准适用于海洋调查船和其他舰船上作收。放水文测量仪器用的电动和电动液压驱动的水文绞车。

Hydrographic Winch

JIS F 2017:1982 巴拿马式导缆器

この規格は，船に用いるバナマチョックについて規定する。

Panama chocks