U25 舱室设备 标准查询与下载

CB/T 3466.8-1992 船用锁 单斜舌弹子外装门锁

本标准规定了船用单斜舌弹子外装门锁的型式和主要参数。 本标准适用于安装在船用钢质门上的单斜舌弹子外装门锁。

Marine lock single latch bolt exterior door lock

CB/T 3466.7-1992 船用锁 钩双舌外装门锁

本标准规定了船用双舌外装门锁的型式和主要参数。 本标准适用于安装在各种船舶的左右式门上的船用双舌外装门锁。

Marine shackle double tongue exterior door lock

CB/T 3466.4-1992 船用锁 弹簧门锁

本标准规定了船用弹簧门锁的型式和主要参数。 本标准适用于安装在各种船舶的弹簧铰链双开门上的船用弹簧门锁。

Marine lock spring door lock

CB/T 3466.11-1992 船用锁 纱门锁

本标准规定了船用纱门锁的型式和主要参数。 本标准适用于安裝在纱门上的船用纱门锁。

Marine lock screen door lock

CB/T 3466.9-1992 船用锁 掀压锁

本标准规定了船用揿压锁的型式和主要参数。 本标准适用于安装在各种船舶的家具橱门及抽屉上的船用揿压锁。

Marine lock flip lock

CB/T 3466.6-1992 船用锁 钩舌移门锁

本标准规定了船用钩舌移门锁的型式和主要参数。 本标准适用于安装在船舶上书橱、卖品部、驾驶室及会议室、客厅等并列拉门和移门上的钩舌移门锁。

Marine lock shackle sliding door lock

CB/T 3466.10-1992 船用锁 插锁

本标准规定了船用插锁的型式和主要参数。 本标准适用于安装在各种船舶上木框的书柜、配膳间的木门或木框玻璃移门上的船用插锁。

Marine lock mortise lock

CB/T 3466.1-1992 船用锁 通用技术条件

本标准规定了船用门锁、船用家具锁的分类、技术要求、试验方法和检验规则等。 本标准适用于各种型式的船用门锁及船用家具锁。

General technical conditions for marine locks

CB/T 3466.12-1992 船用锁 抽屉锁

本标准规定了船用抽屉锁的型式和主要参数。 本标准适用于安装在各种船舶的家具橱门和抽屉上的高锁头、低锁头等弹子抽屉锁。

Marine lock drawer lock

CB 455-1991 压力水柜

本标准规定了压力水柜的分类、技术要求、试验方法、检验规则、包装和运输等。 本标准适用于船舶及钻井平台上生活用淡水管系和卫生水管系的压力水柜。

pressure tank

DIN ISO 5779:1991 造船.普通矩形窗户.窗户定位

The standard specifies the allowable positioning of ordinary rectangular windows to ISO 3903, applicable for passenger and cargo ships intended for international voyages.#,,#

Shipbuilding; ordinary rectangular windows; positioning; identical with ISO 5779:1987

DIN ISO 5780:1991 造船.侧舷窗.窗户定位

Shipbuilding; side scuttles; positioning; identical with ISO 5780:1987

NAVY MS18291 VALID NOTICE 1-1991 船限制吃水标尺

MS18291(SHIPS), dated 5 November 1971, has been reviewed and determined to be valid for use in acquisition.

SHIP LIMITING DRAFT MARK

NAVY MIL-D-24151 A-1990 旋转门窗帘和操作装置

This specification covers roller curtain doors and their operating equipment used for a wide variety of applications on Naval ships.

DOORS, ROLLING, CURTAIN, AND THEIR OPERATING EQUIPMENT

DIN ISO 8863:1990 船舶驾驶室窗户.玻璃窗格的热空气加热

This standard specifies design considerations for hot-air heating of wheelhouse windows on board ships.

Ship's wheelhouse windows; heating by hot air of glass panes; identical with ISO 8863:1987

ISO 3902:1990 造船及海上结构物 舷窗和矩形窗垫料

Specifies the dimensions and material of gaskets used for ensuring watertightness between the main components (main frame, glassholder, deadlight) of side scuttles of ships complying with ISO 1751 and rectangular windows of ships complying with ISO 3903.

Shipbuilding and marine structures; gaskets for rectangular windows and side scuttles

NAVY MIL-D-16791 G-1990 清洁剂一般用途(液体非离子物质)

This specification covers both water-soluble and oil-soluble nonionic detergentsfor use in preparing cleaning solutions which are effective in, and rinsable with, either fresh or sea water.

DETERGENTS, GENERAL PURPOSE (LIQUID, NONIONIC)

ANSI/ASTM F1068:1990 船用单扇固定防气体/防空气的双层门的规范

This specification, to be used in conjunction with Specification F 1073, covers the principal dimensions and the mechanical requirements for manufacturing steel and aluminum individually dogged, airtight/gastight double doors for personnel access through bulkheads, complete with frames, intended to maintain the structural and the air and gas tightness integrity of the bulkheads. The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. The following precautionary caveat pertains only to the Test Methods portion, Section 6, of this specification: This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

DIN 83422:1989 带过滤器盖的排水槽

Drain pot with strainer cover

CB/T 3891-1999 船舶电蒸汽两用饭锅

Marine electric/steam rice cooker