U27 救生设备 标准查询与下载

NF S71-050:1986 工业用永久漂浮和充气安全背心.规范和试验

Industrial inflatable permanent buoyancy safety jackets. Specifications and tests.

UL 1123-1986 船用浮力救生器材

Marine buoyant devices

NAVY MIL-L-5567 F (2)-1986 用于飞机4至7人用充气救生筏

This amendment forms apart of Military Specification-MIL-L-5567F, dated 7 Jan 1983 and is approved for use by all Department and Agencies of the Department of the Defense.

LIFE RAFTS, INFLATABLE-4 AND 7 MAN-FOR AIRCRAFT USE [Use In Lieu Of: NAVY MIL-L-005567 E (1)]

CB*/Z 140-1985 玻璃钢救生艇建造要求

本交件适用于开敞式或封闭式玻璃钢救生艇。 本文件适用于手糊成型艇体玻璃钢积层板的工艺方法。 玻璃钢救十艇艇体尺寸和技术要求应符合CB* 795-1985《开敞式救生艇型式和主要尺寸》和CB* 3238-1984《全封闭式救生艇 类型和基本参数》的要求。 艇体材料参照ZC规范及有关规范和公约规定。 玻璃钢艇体在大气中~30~+65℃的温度范围内存放而不至损坏，在-1~十30℃的温度范围内正常使用。

Fiberglass lifeboat construction requirements

CB* 795-1985 开敞式救生艇型式和基本尺寸

本标准适用于海船钢质、玻璃钢开敞式救生艇。规定了救生艇的型式和基本尺寸。

Types and basic dimensions of open lifeboats

ARMY MIL-A-43146 B-1985 水下呼吸器适配降落伞辅助设备

This document covers an accessory set consisting of the following components.

ACCESSORY SET, PARACHUTE, SCUBA ADAPTING

ISO 8303:1985 造船 系列3-船载驳 主要作业和技术要求

Specifies the main operational and technical requirements for shipborne barges, when used as a means of transport for cargo transportation both on board a barge-carrier and on inland waterways.

Shipbuilding; Shipborne barges, series 3; Main operational and technical requirements

ISO 6764:1985 造船 系列1-船载驳 吊杆装置 布置、尺寸和试验方法

Specifies the materials also and gives a definition.

Shipbuilding; Shipborne barges, series 1; Lifting post casting; Arrangement, dimensions and method of testing

ISO 6765:1985 造船 系列3-船载驳 主要尺寸

Lays also down the dimensions of the principal constructional elements and gives a definition.

Shipbuilding; Shipborne barges, series 3; Main dimensions

ISO 7222:1985 造船 系列2-船载驳 主要尺寸

Specifies also the dimensions of the principal constructional elements and gives a definition.

Shipbuilding; Shipborne barges, series 2; Main dimensions

ISO 6067:1985 造船及海上结构物 救生艇绞车

Specifies the requirements for design, construction, safety, performance and acceptance testing of winches for lifeboats, used for manual, gravity or stored mechanical power launching, recovery and storage of it. Does not include requirements for the prime mover (if any).

Shipbuilding and marine structures; Winches for lifeboats

NAVY MIL-I-23145 B (3)-1985 救生用具的充气组件

This amendment forms a part of Military Specification MIL-I-23145B, dated 15 January 1982, and Is approved for use by all Departments and Agencies of the Department of Defense.

INFLATION ASSEMBLIES, LIFE PRESERVER

ISO 8304:1984 造船 系列3-船载驳 通风系统 主要配合尺寸

The ventilation system of shipborne barges has to be jointed to the ventilation system of the appropriate barge-carrier by means of flexible hoses when cargoes requiring ventilation are transported.

Shipbuilding; Shipborne barges, series 3; Ventilation system; Principal mating dimensions

CB* 474-1984 桨

本标准规定的玻璃钢桨和木质桨，主要供救生艇配套使用。

paddle

ISO 6766:1984 造船 系列4-船载驳 主要尺寸

Lays also down the dimensions of the principal constructional elements and gives a definition.

Shipbuilding; Shipborne barges, series 4; Main dimensions

ISO 7221:1984 造船及海上结构物 系列1-载驳母船上的船载驳 主要技术要求

Specifies the requirements for their loading, unloading and transport on board barge carriers.

Shipbuilding and marine structures; Shipborne barges, series 1, on barge carriers; Principal technical requirements

JT 107-1991 船用工作救生衣

本标准适用于以闭孔型泡沫塑料或其他等效材料为浮力材料的工作救生衣。该救生衣可供内河及海洋中各种船舶的工作人员与水上作业间救生使用。

Work lifejackets for ships

CB* 3072-1983 重力倒臂式吊艇架装置

本标准规定的重力倒臂式吊艇架装置用于CB 795-74所规定的各档救生艇和CBM 2044-82玻璃钢开敞式救生艇之存放和降落。也可用于艇体尺度、重量相近的其他救生艇(包括封闭式救生艇)、工作艇等的存放和降落。

Gravity inverted arm davit device

CB* 3067-1983 玻璃钢划桨工作艇

玻璃钢划桨工作艇配属于海上工程船舶和军辅船舶，作为港内作业用。

fiberglass paddle work boat

NAVY MIL-L-81787 B-1983 LPP-1A型公用设施用可充气救生用具

This specification covers requirements for one type of inflatable utility life preserver designated as Type LPP-lA,

LIFE PRESERVER, INFLATABLE, UTILITY, TYPE LPP-1A