U55 船用管件 标准查询与下载

CB 571-2011 铝制外螺纹接头通舱管件

本标准规定了铝制外螺纹接头通舱管件（以下简称通舱管件）的分类和标记、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于淡水、燃油、滑油船舶管路系统用通舱管件的设计、制造和验收。

Male screwed jointed aluminium pipe penetrating piece

CB/T 425-2011 低压粗油滤器

本标准规定了法兰连接尺寸和密封面按CB/T 4196和GB/T 2501的低压粗油滤器（以下简称油滤器）的分类和标记、要求、试验方法、检验规则、包装和贮存。 本标准适用于燃油、滑油管路系统用油滤器的设计、制造和验收。

Low-pressure oil strainers

CB/T 3657-2011 油污水和生活污水国际通岸接头

要 本标准规定了油污水和生活污水国际通岸接头(简称通岸接头)的分类与标记、要求、试验方法、检验规则和包装。 本标准适用于船舶油污水和生活污水管路排放用通岸接头的设计、制造和验收。

International shore connections for oily wastes and sewage

CB/T 45-2011 船用铸铜法兰

本标准规定了船用铸铜法兰（简称法兰）的基本参数和基本尺寸、要求。 本标准适用于船舶管路附件和机械设备接口法兰的设计选用。

Marine copper-alloy casting flanges

CB/Z 281-2011 船舶管路系统用垫片和填料选用指南

本指导性技术文件规定了船舶管路系统用垫片和填料的类型、适用介质及垫片和填料的选用。 本指导性技术文件适用于船舶管路系统密封用垫片和填料的设计选用。

Guidelines for selection and usage of gaskets and stuffing in vessel piping system

CB/T 4180-2011 船用通风系统管路和附件的公称尺寸

本标准规定了船舶通风系统管路和附件的公称尺寸。 本标准适用于船舶通风系统。

Normal size for ventilation pipe line and accessories for ships metric series

CB/T 4194-2011 船用法兰 类型

本标准规定了船用法兰的类型及其公称压力和公称尺寸。 本标准适用于普通的船舶管路法兰，不适用于输送有毒或爆炸性介质及有特殊要求的船舶管路法兰。

Marine pipe flanges—Types

CB/T 4196-2011 船用法兰 连接尺寸和密封面

本标准规定了船用圆形和扁圆形法兰连接尺寸和密封面的结构及尺寸。亦适用于船舶设备与管子或附件相连接的法兰。

Marine pipe flanges-connection dimensions and mating face

CB/T 4201-2011 不锈钢管对焊接头

本标准规定了不锈钢管对焊接头的分类和标记、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于船舶与海洋工程用不锈钢管对焊接头的设计、制造和验收。

Stainless steel butt-welding fittings

CB/T 4188-2011 带复板的通舱套管

本标准规定了带复板的通舱套管的分类和标记、要求、试验方法、检验规则、标志和贮存。 本标准适用于船舶管路II、III级管系通舱套管的设计、制造和验收。

Penetrations with sleeve

SAE J1942-1-2010 船舶用合格软管

Effective August 28, 1991, the SAE replaced the USCG as the listing agency for Marine Hose Assemblies. The previousUSCG list was discontinued as of December 31, 1992, and is being replaced by this SAE listing, J1942-1.All products appearing on the USCG list as of December 31, 1992, may be carried over to the SAE J1942-1 providedthey meet the new test requirements listed in SAE J1942.If your products comply, you may retain your listings with no additional testing. (Please note that the USCG has theauthority to request and inspect your test results at their discretion).The following list consists of hose data provided as of December 2010, and is for convenience in determiningacceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25. Where the maximumallowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP ortype of fitting. This list has been compiled by SAE Staff from information provided by the manufacturers whose product listings appear in this document.

Qualified Hoses for Marine Applications

DIN ISO 14726:2010 船舶与海上技术.管道系统的内容用识别颜色(ISO 14726-2008)

Ships and marine technology - Identification colours for the content of piping systems (ISO 14726:2008)

DIN 86001:2010 船舶管道.压力等级,压力试验

Pipelines on ships - Pressure ratings, pressure tests

DIN 86025-1:2010 船舶用管夹.带托架的固定夹件.第1部分:不带插件A型和带插件B型

The fastening clamps according to this standard are used for mounting of pipes with outside diameters of 57 mm up to 89 mm. This clamps with elastomer insert can be used within an environmental temperature range from -20 ФC to 120 ФC.

Pipe clamps for shipboard use - Fastening clamps with bracket - Part 1: Type A without insert, Type B with insert

DIN 86025-3:2010 船舶用管夹.带托架的固定夹件.第3部分:插件

nsert mounts according to this standard are used for elastic mounting of pipes, devices and components equipment. They can be used mounts fastening clamps Type B to DIN 86025-1 and Type D to DIN 86025-2.

Pipe clamps for shipboard use - Fastening clamps with bracket - Part 3: Inserts

DIN 86026-2:2010 船舶用管夹.第2部分:管夹用衬垫

Elastomer inserts according to this standard are used for pipe brackets according to DIN 86026-1, they are used for disconnexion of the material against each other.

Pipe clamps for shipboard use - Part 2: Inserts for pipe clamps

DIN 86025-2:2010 船舶用管夹.带托架的紧固夹件.第2部分:不带插件C型和带插件D型

The fastening clamps according to this standard are used for mounting of pipes with outside diameters of 108 mm up to 610 mm. This clamps with elastomer insert can be used within an environmental temperature range from -20 ФC to 120 ФC.

Pipe clamps for shipboard use - Fastening clamps with bracket - Part 2: Type C without insert, Type D with insert

DIN 86026-1:2010 船舶用管夹.第1部分:DN8至DN1400规格管材用管夹

Pipe brackets according to this standard are used for pipes according to DIN 86018, DIN 86019 and ISO 4200.

Pipe clamps for shipboard use - Part 1: Pipe clamps for pipes DN 8 to DN 1400

DIN 86044-1:2010 船舶排气管道.法兰盘.第1部分:重型设计

This standard is applicable to the heavy design of flanges used for the joint of steel pipes according to DIN 86009 for exhaust gas lines of combustion engines and steam boilers on ships.

Exhaust gas lines on ships - Flanges - Part 1: Heavy design

KS V 7816-2009 船舶280K和350K油压管道用套节焊接管法兰

이 표준은 호칭 압력 280 K 및 350 K인 선박의 유압 배관계에 사용하는 배관용 소켓

Shipbuilding-280 K and 350 K socket welding pipe flanges