U55 船用管件 标准查询与下载

KS V 7235-2006 船舶用小型钢板质单式油过滤用筛网

이 규격은 선박용 강판제 단식 기름 여과기에 대하여 규정한다.

Marine steel plate simplex oil strainers

DIN 86266:2006 船舶和航海技术.法兰连接的超轻型晶片式和有法兰的碟形阀. DN 50至DN 125, PN 10

This standard specific single exentric soft sealing butterfly valves for extra light duty of water type and flanged type.

Ships and marine technology - Butterfly valves for flanges extra light duty wafer type and flanged type - DN 50 to DN 125, PN 10

DIN 86254:2006 船舶与海上技术.超轻型截止阀.DN32至DN125，PN10

The standard specifies shut off valves for use in piping systems on bord light and fast ships.

Ships and marine technology - Shut off valves extra light duty - DN 32 to DN 125, PN 10

DIN 86257:2006 船舶与海上技术.超轻型断开式单向阀.DN32至DN125，PN10

The standarad specifies non return valves cutt off type for use in piping systems on bord light and fast ships.

Ships and marine technology - Non return valves cutt off type extra light duty - DN 32 to DN 125, PN 10

DIN 86258:2006 船舶与海上技术.超轻型非截止型单向阀.DN 32至DN 125, PN 10

The standarad specifies non return valves non cutt off type for use in piping systems on bord light and fast ships.

Ships and marine technology - Non return valves non shut off type extra light duty - DN 32 to DN 125, PN 10

KS V ISO 15837:2006 管道系统中使用的垫圈机械连接件.性能规范

이 규격은 끝에 홈이 있는 관용의 홈형 기계식 커플링(grooved-type mechani

Gasketed mechanical couplings for use in piping systems－Performance specification

KS V ISO 15838:2006 管道设施中使用的带密封衬垫的机械耦合配件.性能规范

이 규격은 KS V ISO 15837에 적합한 개스킷 기계식 커플링에 사용하는 부착품의 분

Fittings for use with gasketed mechanical couplings usedin piping applications－Performance specification

KS V ISO 15749-4:2006 船舶和海上结构物的排水系统.第4部分:卫生排水、污水处理管

이 규격 KS V ISO 15749-4는 선박 및 해양 구조물의 위생수 배수의 테두리 내에

Drainage systems on ships and marine structures-Part 4:Sanitary drainage, sewage disposal pipes

KS V 7448-2006 船舶用钢管10K焊接连接件

이 규격은 선박용 강관 10 K 용접 유니언(이하 유니언이라 한다.)에 대하여 규정한다.

Steel pipe 10 K welding type unions for marine use

KS V ISO 15749-5:2006 船舶和海上结构物的排水系统.第5部分:甲板、货舱和游泳池的排水

이 규격 KS V ISO 15749-5는 다음에서 나오는 중수의 중력식 이송 배수관의 계획

Drainage systems on ships and marine structures－Part 5：Drainage of decks, cargo spaces and swimming pools

JIS F 7152:2006 船用发动机湿排气系统用橡胶和塑料软管.规范

この規格は，3タイプ及び2クラスのホースの必要条件について規定する。ホースは，船用機関の湿式排気システム(排気ガスが流れ出る冷却水に混合される場所。)での使用を意図したものである。

Rubber and plastics hoses for marine-engine wet-exhaust systems -- Specification

DIN 86003-1:2006 船舶和海上技术.液态介质用管道系统的设计、生产和试验.第1部分:设计

The standard lays down general requirements on design, construction and test of pipelines on ships#,,#

Ships and marine technology - Design, production and test of pipeline systems for liquid media - Part 1: Design

KS V 0516-2006 海船配管用铜管使用标准

? ??? ??? ?? ??? ???? ??? ?? ??? ??? ?? ?? ??? ???

Application of copper pipes for marine use

KS V 0517-2006 小型船舶的钢管使用标准

? ??? ???? ???? ??? ???? ??(?? ???? ??.)? ?? ??? ?

Small ships-steel pipes-Application

KS V ISO 15749-1:2006 船舶和海上结构物的排水系统.第1部分:卫生排水系统设计

이 규격은 KS V ISO 15749-2, -3, -4와 함께 선박 및 해양 구조물의 거주

Drainage systems on ships and marine structures―Part 1：Sanitary drainage-system design

KS V ISO 15749-2:2006 船舶和海上结构物的排水系统.第2部分:重力系统用卫生排水和排水管道

이 규격은 선박 및 해양 구조물의 중력식 위생 배수관 장치의 계획과 설계에 적용한다.

Drainage systems on ships and marine structures－Part 2：Sanitary drainage, drain piping for gravity systems

KS V ISO 15749-3:2006 船舶和海上结构物的排水系统.第3部分:真空系统用卫生排水和排水管道

이 규격은 선박 및 해양 구조물의 진공식 위생수 배수관 장치 계획과 설계에 적용한다.

Drainage systems on ships and marine structures－Part 3：Sanitary drainage, drain piping for vacuum systems

JIS F 7335 AMD 1:2006 造船.软管连接件和管件(修改件1)

Shipbuilding -- Hose connections and fittings (Amendment 1)

BS EN 10329:2006 海上或离岸管道用钢管和管件.外部连接包覆层

This European Standard specifies the application and related testing of the corrosion protection coatings applied to steel surfaces left bare after the tubes and fittings (components) are joined by welding. It defines the different types of coatings for buried and immersed pipelines defined in Table 1. This European Standard applies to seamless or welded steel tubes used in the construction of pipelines for the conveyance of fluids. Components coated with this type of coating may be further protected by means of cathodic protection.

Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings

BS ISO 19922:2006 船舶和海上技术.带回弹性和弹性密封件的金属管道组件的耐火性.试验台的要求

ISO 19922:2005 specifies requirements on a test bench for determining the fire resistance of metallic pipeline components containing a resilient or elastomeric material, in particular by tests according to ISO 19921.

Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Requirements on the test bench