U60 船舶电气、观通、导航设备综合 标准查询与下载

BS EN 61996-2:2006 海上导航和无线电通信设备及系统.船用航程数据记录仪(VDR).单一航海数据记录仪(S-VDR).性能要求、测试方法和要求的试验结果

This part of IEC 61996 specifies the minimum performance requirements, technical characteristics and methods of testing, and required test results, for simplified shipborne voyage data recorders (S-VDRs) as required by IMO MSC.163(78). It takes into account IMO resolution A.694(17) and is associated with IEC 60945. When a requirement in this standard is different from IEC 60945, the requirement in this standard takes precedence. NOTE All text of this standard, whose wording is identical to that of IMO MSC.163(78) or A.861(20) is printed in italics, and the Resolution and associated performance standard paragraph numbers are indicated in brackets.

Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results

BS 8450:2006 船舶上电气和电子设备安装的实施规则

This British Standard gives recommendations for the design, installation and maintenance of electrical equipment for the generation, storage, conversion, distribution and utilization of electrical energy for all purposes in ships of all descriptions, including, where relevant, inland and harbour craft, but excluding ships of war. NOTE For vessels smaller than 500 grt or with a length less than 50 m, IEC 60092-507 provides a basic standard for small vessel electrical installations, including direct current systems not exceeding 50 V and alternating current systems not exceeding 250 V single phase or 500 V three phase. These recommendations are intended to provide satisfactory operation and safety, especially from fire and electrical shock, of installed equipment and portable and transportable equipment which is intended to be connected to the ship’s electrical distribution system. They relate principally to requirements for the installation, utilization, inspection and testing, but certain recommendations for the construction of electrical and electronic equipment are included. This British Standard is not applicable to the internal wiring of manufactured apparatus that is not wired on board. It is not intended to provide for every circumstance – those of a special character may require appropriate advice.

Code of practice for installation of electrical and electronic equipment in ships

HJB 333.1-2006 舰炮火控设备（指挥仪）修理技术要求 第1部分：通用技术要求

Technical requirements for repair of naval gun fire control equipment (director) Part 1: General technical requirements

HJB 333.2-2006 舰炮火控设备（指挥仪）修理技术要求 第2部分：H/ZPJ-2型双100mm舰炮指挥仪

Naval gun fire control equipment (commander) repair technical requirements Part 2: H/ZPJ-2 dual 100mm naval gun commander

HJB 333.3-2006 舰炮火控设备（指挥仪）修理技术要求 第3部分：H/ZPJ-2A型双100mm舰炮指挥仪

Naval gun fire control equipment (commander) repair technical requirements Part 3: H/ZPJ-2A dual 100mm naval gun commander

HJB 333.4-2006 舰炮火控设备（指挥仪）修理技术要求 第4部分：H/ZPJ-2C型双100mm舰炮指挥仪

Naval gun fire control equipment (commander) repair technical requirements Part 4: H/ZPJ-2C dual 100mm naval gun commander

HJB 333.8-2006 舰炮火控设备（指挥仪）修理技术要求 第8部分：H/ZPJ-4G型双37mm舰炮指挥仪

Naval gun fire control equipment (commander) repair technical requirements Part 8: H/ZPJ-4G dual 37mm naval gun commander

HJB 333.7-2006 舰炮火控设备（指挥仪）修理技术要求 第7部分：H/ZPJ-4C型双37mm舰炮指挥仪

Naval gun fire control equipment (commander) repair technical requirements Part 7: H/ZPJ-4C dual 37mm naval gun commander

HJB 333.6-2006 舰炮火控设备（指挥仪）修理技术要求 第6部分：H/ZPJ-4A型双37mm舰炮指挥仪

Naval gun fire control equipment (commander) repair technical requirements Part 6: H/ZPJ-4A dual 37mm naval gun commander

HJB 333.5-2006 舰炮火控设备（指挥仪）修理技术要求 第5部分：H/ZPJ-25型双30mm舰炮指挥仪

Naval gun fire control equipment (commander) repair technical requirements Part 5: H/ZPJ-25 dual 30mm naval gun commander

GJB 5668-2006 舰船电子对抗设备安装要求

本标准规定了舰船电子对抗设备装舰对设备、安装文件、设备布置、安装前检查、机械安装、电缆敷设与安装、搭接与接地和安装后检查的要求。 本标准适用于舰船电子对抗设备（以下简称设备）研制、生产、装舰、验收以及编制设备文件。 本标准不适用于舰载飞行器电子对抗设备和潜艇电子对抗设备。

Installation requirements for shipborne EW equipment

GJB 792A-2006 舰船箔条干扰设备设计定型试验规程

本标准规定了舰船箔条干扰设备在试验场进行设计定型或鉴定试验的基本要求、试验项目和试验方法。 本标准适用于舰船箔条干扰设备（以下简称被试设备）的设计定型或鉴定试验。研制性试验、验收试验亦可参照使用。

Regulation for the finalized design of shipborne chaff jamming equipment

GJB 5660-2006 舰船红外干扰设备设计定型试验规程

本标准规定了舰船红外干扰设备在试验场进行设计定型或鉴定试验的基本要求、试验项目和试验方法。 本标准适用于舰船红外干扰设备（以下简称被试设备）设计定型或鉴定试验。研制性试验亦可参照执行。

Regulation for the finalized design of shipborne infrared jamming equipment

BS EN 61162-402:2005 船舶导航和无线电通信设备及系统.数字接口.多方通话器和多方受话器.船舶系统互连.文献和试验要求

General This standard series, IEC 61162-400 and upwards, specifies a communication protocol for use in integrated ship systems. It also specifies an interface description language for use together with the protocol, a set of rules for the use of this language and a set of standard interfaces described in the language. This part of the standard specifies a minimum set of tests to be done, test results to be achieved and documents that shall be available for all implementations of general protocol software and applications that are compliant with the IEC 61162-4 standard. Although this set of standard documents is collectively referred to as IEC 61162-4, the actual part numbers are in the 400-series (see 1.4 of IEC 61162-400). Limitations in scope The tests and documentation requirements do not cover electrical, physical or environmental requirements that may apply to the use of software or computers onboard ships. Such requirements may be covered by IEC 60945 or IEC 60092-504. Other standards may also be applicable. This standard does not necessarily cover all requirements from classification societies or other authorities. It is the responsibility of the user of this standard to ensure that all appropriate regulations are addressed. This standard contains tests to check that an application using the IEC 61162-4 protocol adheres to its advertised interface specification. These tests cannot guarantee the correct functionality of that application beyond the possibility of connecting it to the network and with a limited degree of accuracy in the messages transferred. This standard does not cover the system in which the IEC 61162-4 communication standard is used. Additional requirements will normally apply to the total system configuration. Fundamental requirements relating to ensuring reliable and timely transfer of data across data communication links are included in other standards associated with the integration of equipment such as IEC 60092-504 and IEC 61209. This standard does not contain tests to verify compliance with these requirements. In addition, specific equipment related standards may also contain requirements for correctness and timeliness of data transmissions. Neither does this standard contain any tests to verify such requirements. Thus, results from tests carried out in accordance with this standard cannot be used to demonstrate compliance with the requirements of any other standards for system or equipment functionality. Limitations in test coverage The test plan only specifies general tests of the protocols and a limited set of other general properties (black box tests). The test procedures will not generally cover tests of operating systems, communication libraries or other software components that are used to implement the standard. Neither does this standard specify any tests related to the way the system is implemented (white or glass box testing). Limitations in degree of detail The test procedures are general in nature and do not generally specify detailed test programs and procedures. The procedures specify a minimum set of functional aspects that need to be tested, with, in some cases, a minimum required set of excitations and corresponding required responses. The testers must develop the detailed procedures and test tools themselves.

Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Multiple talkers and multiple listeners - Ship systems interconnections - Documentation and test requirements

GJB 5467-2005 舰载近程反导光电跟踪仪规范

本规范规定了舰载近程反导光电跟踪仪（以下简称光电跟踪仪）要求和质量保证规定等内容。 本规范适用于光电跟踪仪的设计、制造、验收。其他类型的光电跟踪仪（舰载、车载）亦可参照使用。

Specification for ship-borne close-in anti-missile electro-optic tracker

JIS F 8061:2005 船舶电气设施.第101部分:定义和一般要求

この規格(JIS F 8061)は，船で使用すろ電気設備に適用する。

Electrical installations in ships -- Part 101: Definitions and general requirements

JIS F 8080:2005 船舶电气设施.第506部分:专项.运载特定的危险货物和散装危险材料的船舶

この規格は，次の船舶及び貨物区域の電気設備について適用する。a)貨物コンテナを運送すろために特別に設計されたものではないが，こん(梱)包された危険物（貨物コンテナ及びポータブルタンクで運送されるものを含む。)を運送するための船舶及び貨物区域。b)危険物を貨物コンテナ及びポータプルタンクで運送する目的で建造されたコンテナ船及び貨物区域。c)危険物を運送するためのロールオン・ロールオフ船及びロールオン・ロールオフ貨物区域。d)固体危険物及びばら積みの際に危険性をもつ物質(MHB)をばら積みで運送するための船舶及び貨物区域。e)船舶に搭載されたバージによってばら債みの液体及び気体を除く危険物を運送するための船舶及び貨物区域。

Electrical installations in ships -- Part 506: Special features -- Ships carrying specific dangerous goods and materials hazardous only in bulk

JT/T 4401-1993 船舶电气设备维护管理基本技术要求

Basic technical requirements for maintenance and management of ship electrical equipment

IEC 60092-352:2005 船舶电气设施.第352部分:电缆的选择和敷设

This standard lays down the basic requirements for the choice and installation of shipboard cables intended for low-voltage power systems at voltages up to and including 1000 V.

Electrical installations in ships - Part 352: Choice and installation of electrical cables

HJB 315-2005 舰船气象仪通用规范

General specification for ship weather instrument