V00 标准化、质量管理 标准查询与下载



共找到 788 条与 标准化、质量管理 相关的标准,共 53

These requirements are applicable to IAQG global sectors when utilizing Aerospace Industry Controlled Other Party (ICOP) schemes for the assessment and certification of supplier quality systems in accordance with the requirements contained in 9104. IAQG member companies have committed to perform sufficient oversight of the Aerospace accreditation/certification assessment processes in order to ensure conformance to established requirements contained in 9104. The purpose of this standard is to document the process for oversight of the 9100-series certification of Aerospace Quality Management Systems (AQMS) program. This process shall be implemented by participating IAQG member companies, ABs, CBs, AABs, TPABs, and training providers to ensure consistent conformance with the requirements of 9104.

Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs

ICS
49.020
CCS
V00
发布
2007-03-01
实施

本标准规定了民用航空油料质量调查程序的内容和要求。 本标准适用于在中华人民共和国境内,从事民用航空活动的所有航空器发生的各类事故、事故征候调查中所涉及的航空油料质量的调查。 本标准不适用于首次获得适航证之前的所有民用航空器试飞期间,对所发生的各类事故、事故征候调查中所涉及航空油料质量的调查。 用户对加入的航空油料质量提出质疑的调查,可参照本标准执行。

Investigation procedure of civil aviation oil quality

ICS
03.120.10
CCS
V00
发布
2007-02-07
实施
2007-04-01

This "Aerospace Series" Prestandard has been drawn up under the responsibility of ASD-STAN (The AeroSpace and Defence Industries Association of Europe - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace Series Quality Management Systems Assessment Edition P5

ICS
CCS
V00
发布
2007-02-01
实施

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Aerospace series Quality management systems Part 002: Requirements for Oversight of Aerospace Quality Management System Certification/Registrations Programs Edition P1

ICS
65.020.30
CCS
V00
发布
2007-02-01
实施

1.1.1 The 35th Session of the ICAO Assembly in October 2004 unanimously adopted Resolution A35-5 on both aircraft noise and aircraft engine emissions'. The Assembly adopted the environmental goal of limiting or reducing the impact of aviation greenhouse gas emissions on the global climate and endorsed "the further development of an open emissions trading system for international aviation". 1.1.2 In this context, the Assembly further requested the ICAO Council to prepare "guidance for use by Contracting States, as appropriate, to incorporate emissions from international aviation into Contracting States' emissions trading schemes consistent with the UNFCCC process [and that it] address the structural and legal basis for aviation's participation in an open emissions trading system, including key elements such as reporting, monitoring and compliance." This document has been prepared in response to that request. 1.1.3 It should be noted that this guidance is not of a regulatory nature; rather, it provides States with advice and information that they may need or find helpful. It cannot, and does not purport to, cover every conceivable issue that might arise: indeed ICAO recognizes that Contracting States have their own legal obligations, existing agreements, current laws and established policies. States should therefore consider how best to apply this guidance to their specific circumstances. The scope of this guidance material extends exclusively to international civil aircraft operations and does not include State aircraft, which covers military, customs nd police services.

Draft Guidance on the Use of Emissions Trading for Aviation

ICS
CCS
V00
发布
2007
实施

1.1 This classification covers a set of definitions and categorization for the certification and licensing of Unmanned Aircraft (UA) pilots. It is designed for use by both industry and regulatory authorities applicable to UA across the entire size, weight and performance continuum. In creating this classification, contributors were guided by the following principles:1.1.1 Parallel existing regulations for manned aircraft to the maximum extent practical.1.1.2 Similar words in other standards or regulations shall have similar meaning herein (e.g., 14 CFR Part 61 and FAA Notice 07-01, and Australias CASR Part 101).1.1.3 Avoid burdening regulatory agencies and users with an overabundance of new terms and definitions. Where new terms are required, their meanings shall strive to be self-evident.1.1.4 Although targeted primarily at commercial and private users, the standard should anticipate adoption by military and government users.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Classification for Unmanned Aircraft Pilot Certification

ICS
49.020
CCS
V00
发布
2007
实施

MARK 3 AVIATION SATELLITE COMMUNICATION SYSTEM 2005; Includes Supplement 1

MARK 3 AVIATION SATELLITE COMMUNICATION SYSTEM 2005; Includes Supplement 1

ICS
CCS
V00
发布
2006-11-22
实施

本标准规定了民用机场的服务质量要求、以满足旅客、航空公司、货主等机场顾客的需求。 本标准适用于民用机场(含军民合用机场的民用部分)。

Givil airport service standards

ICS
03.120
CCS
V00
发布
2006-10-16
实施
2007-01-01

Coating components are individually packaged components such as base component (Part A), converter component or hardener (Part B), or liquid portion, powder portion and curing solution. Indicate only applicable characteristics.

COATING COMPOUNDS, NONFLAMING, FIRE-PROTECTIVE (METRIC)

ICS
49.020
CCS
V00
发布
2006-08-09
实施

Aerospace series - Quality systems - First article inspection.

ICS
03.120.10;49.020
CCS
V00
发布
2006-08-01
实施
2006-08-05

Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Registrations Programs.

ICS
03.120.10;49.020
CCS
V00
发布
2006-08-01
实施
2006-08-05

CABIN EQUIPMENT INTERFACES PART 2 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEMS - SEAT INTERFACES 1996; Includes Supplements 1-5

CABIN EQUIPMENT INTERFACES PART 2 CABIN MANAGEMENT AND ENTERTAINMENT SYSTEMS - SEAT INTERFACES 1996; Includes Supplements 1-5

ICS
CCS
V00
发布
2006-07-14
实施

The purpose of this procedure is to define the content and the presentation of the Assessment Report.

Quality Management Systems Assessment

ICS
03.120.10;49.020
CCS
V00
发布
2006-07-01
实施

These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the suppliers activities. It shall be applied to the suppliers complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. This AS provides the approval process for Auditor Authentication Bodies (AAB), training course providers, trainers and auditors who meet the requirements of AIR5493 and outlines the Americas sector specific process to implement AS9104. This document is created to be in conformance with AS9104. NOTE: The requirements defined in this AS are applicable to ABs, CRBs, and Original Equipment Manufacturers (OEMs), during audit and/or certification/registration to the applicable quality management system standard to meet industry accepted practices. The purpose of this document is to give requirements on the process for providing aerospace companies and their suppliers with assessment and certification/registration of their quality systems, by accredited CRBs.

Americas Aerospace Quality Group (AAQG) Requirements for Aerospace Quality Management System Certification/Registrations Programs

ICS
49.020
CCS
V00
发布
2006-07-01
实施

ARINC Specification 664 has been developed in several parts and written with a view that commercially available Commercial Information Technology Standards can be applied to aviation with minimal changes. Further, where there are selections among the c

Aircraft Data Network Part 1 Systems Concepts and Overview 2002: Includes Supplement 1

ICS
CCS
V00
发布
2006-06-30
实施

The purpose of this document is to define Ethernet physical parameters and data link layer specifications for use in a commercial aircraft environment. It provides general and specific guidelines for the use of IEEE 802.3 compliant Ethernet. Physical L

Aircraft Data Network Part 2 Ethernet Physical and Data-Link Layer Spceification 2003: Includes Supplement 1

ICS
CCS
V00
发布
2006-06-30
实施

This standard defines uniform Quality and Technical requirements relative to metallic parts marking performed in using "Data Matrix symbology" used within the aerospace industry. The ISO/IEC 16022 specifies general requirements (data character encodation, error correction rules, decoding algorithm, etc.). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the following requirements to ensure electronic reading of the symbol. The marking processes covered by this standard are as follows: - Dot peening - Laser - Electro-chemical etching Further marking processes will be included if required. This standard does not specify information to be encoded Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the Data Matrix Marking. Symbol position should allow optimum illumination from all sides for readability.

Aerospace series - Quality management systems - Data matrix quality requirements for parts marking

ICS
03.120.10;49.020
CCS
V00
发布
2006-06-30
实施
2006-06-30

1.1 General These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be EN 9100/9110/9120, as appropriate to the supplier’s activities. It shall be applied to the supplier’s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards. 1.2 Purpose The purpose of this European Standard is to give requirements on the process for providing aerospace companies and their suppliers with assessment and certification/registration of their quality systems, by accredited CRBs.

Aerospace series - Quality management systems - Requirements for aerospace quality management system certification/ registrations programs

ICS
03.120.20;49.020
CCS
V00
发布
2006-06-30
实施
2006-06-30

Air/Ground Character-Oriented Protocol Specification Includes Supplements 1 Through 6

Air/Ground Character-Oriented Protocol Specification 1992; Includes Supplements 1-6

ICS
CCS
V00
发布
2006-06-16
实施

FLIGHT DATA ACQUISITION AND RECORDING SYSTEM 1978; Supplement 1-12

FLIGHT DATA ACQUISITION AND RECORDING SYSTEM 1978; Supplement 1-12

ICS
CCS
V00
发布
2006-06-16
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号