V00 标准化、质量管理 标准查询与下载

ARINC 761-3-2006 改进型航空卫星通讯系统航行器安装预备1997包括附录1到3

Second Generation Aviation Satellite Communication System, Aircraft Installation Provisions 1997; Includes Supplements 1-3

Second Generation Aviation Satellite Communication System, Aircraft Installation Provisions 1997; Includes Supplements 1-3

SAE ARP9013/1-2005 使用独立批取样法的统计产品验收要求

The purpose of this SAE Aerospace Recommended Practice (ARP) is to ensure conformance for each product characteristic being verified in a lot, without maintaining information from previous lots. ARP9013/1 specifies a product acceptance system for isolated lots. For example, isolated lot sampling avoids keeping track of the normal, tightened, and reduced levels of sampling formerly used in MIL-STD-105 and currently used in ANSI/ASQC Z1.4. Because those switching rules provided significant long-term protection for product quality, these isolated lot tables replace that protection in other ways.

Statistical Product Acceptance Requirements Using Isolated Lot Sampling Methods

SAE ARP9013-2005 统计产品验收要求

This SAE Aerospace Recommended Practice (ARP) establishes the general requirements when implementing any of the statistical product acceptance methods as defined in ARP9013/1, ARP9013/2, ARP9013/3, and ARP9013/4. This recommended practice also establishes the minimum content required to be covered in an organizations documented procedures that govern their application of statistical product acceptance methods. These general requirements and documented procedures apply the requirements of AS9100 plus requirements for retrievability, safety/critical characteristics, quality parameters, and that these parameters protect the customer. This recommended practice is to be used in conjunction with the variety of sampling strategies, statistical techniques, and process control methods of the ARP9013/1 through ARP9013/4 recommended practices as chosen by the organization.

Statistical Product Acceptance Requirements

JIS Q 9100 ERRATUM 1:2005 勘误

ERRATUM

ARINC 631-4-2005 特高频数字链接模式2执行准备1991包括附录1到4

VHF DIGITAL LINK (VDL) MODE 2 IMPLEMENTATION PROVISIONS 1991; Includes supplements 1-4

VHF DIGITAL LINK (VDL) MODE 2 IMPLEMENTATION PROVISIONS 1991; Includes supplements 1-4

ARINC 763-3-2005 网络服务器1999包括附录1到3

NETWORK SERVER SYSTEM (NSS) 1999; Includes Supplements 1-3

NETWORK SERVER SYSTEM (NSS) 1999; Includes Supplements 1-3

ARINC 485P2-1-2005 船舱设备接口部分2身体层协议2003包括附录1

CABIN EQUIPMENT INTERFACES PART 2 PHYSICAL LAYER ?IN-SEAT PROTOCOL 2003; Includes Supplement 1

CABIN EQUIPMENT INTERFACES PART 2 PHYSICAL LAYER ?IN-SEAT PROTOCOL 2003; Includes Supplement 1

AECMA PREN 9114-2005 航空航天系列.航空公司质量系统直接授权指导.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments

Aerospace series Quality systems Direct Ship Guidance for Aerospace Companies Edition P 1

AECMA PREN 9107-2005 航空航天系列.航空公司质量系统直接授权指导.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace series Quality systems Direct Delivery Authorization Guidance for Aerospace Companies Edition P 1

ARINC 757-4-2005 座舱声音记录器1993包括附录1到4

COCKPIT VOICE RECORDER (CVR) 1993; Includes Supplements 1-4

COCKPIT VOICE RECORDER (CVR) 1993; Includes Supplements 1-4

ARINC 623-3-2005 特征导向航空业务使用1994包括附录1到3

CHARACTER-ORIENTED AIR TRAFFIC SERVICE (ATS) APPLICATIONS 1994; Includes supplements 1-3

CHARACTER-ORIENTED AIR TRAFFIC SERVICE (ATS) APPLICATIONS 1994; Includes Supplements 1-3

BS EN 14514:2005 航天工程标准.功能分析

Space engineering standards - Functional analysis

NF L00-104:2005 航空航天系列.质量管理体系.航空航天标准部件的质量鉴定程序

Aerospace series - Quality management systems - Qualification Procedure for aerospace standard parts.

OASD SD-9-2005 国防部指导参与非政府标准的发展和使用

Participants must become familiar with the purpose, organization, structure, and operating procedures of the NGSB. In addition, because it may be relevant to later agency deliberations about the use of the standard or other document, participants should determine whether the committee (1) is balanced, (2) follows agreed-on procedures (including transparency and due process), (3) maintains openness, and (4) operates by consensus. ANSI accreditation is one indication that the NGSB follows these procedures. Participants in standards committees should review the purpose and scope of each particular activity and should seek clarification of any ambiguities. Participants should also be aware that restriction of competition through the use or abuse of standards procedures is improper and violates various federal and state antitrust statutes; such violations are subject to civil and criminal prosecution.

DOD GUIDANCE ON PARTICIPATION IN THE DEVELOPMENT AND USE OF NON-GOVERNMENT STANDARDS

AECMA TR 9135-2005 航空航天系列.NATO供应者质量系统要求.第1版

This technical report contains the NATO requirements for Quality, complementing the EN 9100 quality requirements. A system needs to be established, documented, applied, maintained, assessed and improved, and/or evaluated, in accordance with requirements contained in the subsequent sections.

Aerospace series Quality systems Specific quality requirements for NATO suppliers Edition 1

ARMY MIL-STD-209 K-2005 吊挂和固定束缚装置接口标准

This interface standard is approved for use by all Departments and Agencies of the Department of Defense.

INTERFACE STANDARD FOR LIFTING AND TIEDOWN PROVISIONS

AECMA PREN 9132-2005 航空航天系列.质量管理系统矩阵质量要求部分 标记.P2版

This standard defines uniform Quality and Technical requirements relative to metallic parts marking performed in using “Data Matrix symbology” used within the aerospace industry. The ISO/IEC 16022 specifies general requirements (data character encodation, error correction rules, decoding algorithm, etc.). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the following requirements to ensure electronic reading of the symbol.

Aerospace Series Quality Management Systems"Data Matrix" Quality Requirements for Parts Marking Edition P 2

ICAO 9862-2005 理事会的年度报告.2007年大会的讨论会文献

Annual Report of the Council - Documentation for the session of the Assembly in 2007

Annual Report of the Council - Documentation for the session of the Assembly in 2007

SAE AS9104A-2005 航空航天质量管理体系认证/登记计划要求

These requirements are applicable to IAQG sector schemes when making use of ABs, CRBs and their auditors, for the assessment and certification/registration of supplier quality systems in accordance with the requirements of this document. The quality management system standard used by the CRB shall be 9100/9110/9120, as appropriate to the suppliers activities. It shall be applied to the supplier?s complete Quality System that covers aerospace products. Sectors may use these requirements for other standards. IAQG members have committed to recognize the equivalence of certification/registration of a suppliers quality management system to either of the AS, EN or JISQ/SJAC standards.

Requirements for Aerospace Quality Management System Certification/Registrations Programs

ARINC 424-18-2005 航空系统数据库1975包括附录1到18

Navigation System Data Base 1975; Includes Supplements 1 Thru 18

Navigation System Data Base 1975; Includes Supplements 1 Thru 18