V00 标准化、质量管理 标准查询与下载

SAE AS7110/3C-2003 针对电子束焊的国家航空航天和国防承包商认证计划要求

This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for electron beam welding.

Nadcap Requirements for Electron Beam Welding

SAE AS7110/2C-2003 针对闪光焊的国家航空航天和国防承包商认证计划要求

This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to therequirements contained in AS7110, the requirements contained herein shall apply tosuppliers seeking Nadcap accreditation for Flash Welding.

Nadcap Requirements for Flash Welding

NASA NPD 7410.1 REV H-2003(R2008) 主题：从外部资金获取的签约管理和拨款支持服务(2008年6月20日 重新生效)

This NPD is applicable to NASA Headquarters and NASA Centers, including Component Facilities.

Subject: Management of Contract and Grant Support Services Obtained from External Sources (Revalidated June 20, 2008)

SAE AS7108B-2003 国家航空航天和国防合同方授信项目化学处理的审核准则,代替SAE AS 7108/2A [代替:SAE AS 7108/2A,SAE AS 7108/2]

This Aerospace Standard (AS) establishes the requirements for suppliers of Chemical Processing Services to be accredited by NADCAP. NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Chemical Processes Task Group. Using the audit checklist (AC7108) will ensure that accredited Chemical Process suppliers meet all of the requirements in this standard and all applicable supplementary standards.

Nadcap AUDIT CRITERIA FOR CHEMICAL PROCESSING Supersedes SAE AS 7108/2A [Superseded: SAE AS 7108/2A, SAE AS 7108/2]

ARMY MIL-DTL-53072 C-2003 耐化学试剂性敷料系统的应用程序和质量控制检查

This document covers the general requirements for application and inspection of the chemical agent resistant coating(CARC) system used on tactical military equipment.

CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION

BS EN 9100:2003 航空航天系列.质量管理体系.要求(基于ISO 9001-2000)和质量体系.设计、开发、生产、安装和维修的质量保证模型(基于ISO 9001-1994)

1 General This standard includes ISO 9001:2000 quality management system requirements and specifies additional requirements for a quality management system for the aerospace industry. The additional aerospace requirements are shown in bold, italic text. It is emphasized that the quality management system requirements specified in this standard are complementary (not alternative) to contractual and applicable law and regulatory requirements. This International Standard specifies requirements for a quality management system where an organization a) needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable regulatory requirements. NOTE In this International Standard, the term "product" applies only to the product intended for, or required by, a customer. 2 Application All requirements of this International Standard are generic and are intended to be applicable to all organizations, regardless of type, size and product provided. Where any requirement(s) of this International Standard cannot be applied due to the nature of an organization and its product, this can be considered for exclusion. Where exclusions are made, claims of conformity to this International Standard are not acceptable unless these exclusions are limited to requirements within clause 7, and such exclusions do not affect the organization's ability, or responsibility, to provide product that meets customer and applicable regulatory requirements. note:1) With the permission of the International Organization for Standardization (ISO). The complete standard may be obtained from any ISO member or from the ISO Central Secretariat, Case Postale 56, 1211 Geneva 20, SWITZERLAND. Copyright remains with ISO.

Aerospace series - Quality management systems - Requirements (based on ISO 9001:2000) and quality systems - Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994)

DOD MIL-STD-188-197 A NOTICE 1-2003 用于国家图像传输格式标准的可接受递推插值差值脉冲编码调制(ARIDPCM)

MIL-STD-188-197A, dated 12 October 1994, is inactive for new design and will not be maintained or updated for future development.

ADOPTIVE RECURSIVE INTERPOLATED DIFFERENTIAL PULSE CODE MODULATION (ARIDPCM) COMPRESSION ALGORITHM FOR THE NATIONAL IMAGERY TRANSMISSION FORMAT STANDARD

ICAO CIRCULAR 298-2003 航空器失事调查人用培训指南.06/2003印本

The investigation of an aircraft accident is a task that can be almost unlimited in scope. Therefore, some investigations will be curtailed by the resources available, unless proper management of the investigations is exercised. The investigator-in-charge is responsible for ensuring that the expenditure of the resources available results in an investigation that extracts the maximum benefit to the safety of aviation. The investigator-in-charge must have the experience to direct the investigation in a manner that ensures resources are used to the maximum effect and not squandered on irrelevant lines of inquiry. At the same time, the investigator-in-charge must also ensure, as much as is practicable, that relevant lines of inquiry are terminated as soon as they have achieved the level beyond which further expenditure of resources will be uneconomical in terms of enhancing safety. As an investigator gains experience, he will realize that the need to increase his knowledge and I upgrade his skills is a continuing process. While training is essential, the optimization of an investigator’s capabilities generally depends upon a personal commitment to excellence. During the Accident Investigation and Prevention’(A1G) Divisional Meeting in September 1999, several States expressed the view that there was a need to develop common standards for the training of investigators. The training standards were to be compiled in such a way that they would be adaptable to a variety of cultures and operational requirements. Based on the discussion, the meeting in its Recommendation 7/2, agreed that ICAO would develop guidelines for the training of investigators. In response to the Recommendation, ICAO developed the training guidelines contained in this circular. The circular discusses the experience and employment background required for training as an aircraft accident investigator. It also outlines the progressive training that is considered necessary to qualify a person for the various investigation roles, including appointment as the investigator-in-charge of an investigation into a major accident involving a large transport category aircraft. ICAO acknowledges that training guidelines are evolutionary in nature and may need to be updated periodically. Throughout this circular, with the exception of the definitions in Chapter 1, the use of the male gender should be understood to include male and female persons and the term “accident” should be understood to include “incident”. ICAO is grateful for the considerable assistance provided by the International Society of Air Safety Investigators in the preparation of this circular.

Training Guidelines for Aircraft Accident Investigators Printed 06/2003

SAE AIR5493A-2003 (R)开发,实施和控制航天员培训的要求

This document shall be applied by accreditation bodies, registrars and other providers of training for the instruction of auditors or other professionals for specialization for the aerospace industry per the requirements of AIR5359. Additionally, this document applies to all organizations qualifying Aerospace Auditors in support of Aerospace Quality Systems standards AS9000 and AS9100. The purpose of this document is to outline the process for establishing, controlling and standardizing qualified Aerospace Auditor training programs to satisfy the requirements established by AIR5359 in support of the recognition of AS9000 and AS9100 Aerospace Quality Management System standards.

(R) Requirements for Development, Implementation and Control of an Aerospace Auditor Training

NASA NPR 7100.1-2003(R2008) 对研究受试人的保护(7/7/08 重新生效)

P.1.1 This NASA Procedural Requirements(NPR) outlines the implementing procedures and guidelines for the Agency to conduct or support research involving human subjects. These guidelines follow the provisions of "Federal Policy for the Protection of Human Subjects" as codified for NASA in Title 14 CFR Part 1230 and for the U. S. Department of Health and Human Services (DHHS) in Title 45 CFR Part 46. These regulations are implemented by the DHHS, Office for Human Research Protections (OHRP). P.1.2 The primary intent of these guidelines is to provide instructions on setting up oversight protection for the rights, medical safety, and well-being of human subjects involved in research. This shall cover all volunteers who participate in any research utilizing NASA facilities, including NASA aircraft and spacecraft, directed by NASA personnel or onsite contractors, and in any NASA-conducted or supported research. P.2.1 These requirements apply to NASA Headquarters (HQ), and all NASA Centers and component facilities engaged in experiments involving human subjects conducted or supported by NASA, conducted in NASA facilities, aircraft and spacecraft, or which involve NASA to any degree. The terms and conditions of this NPR, as applicable, are required to be incorporated in any contract, cooperative agreement, grant, or reimbursable arrangement, which involves human subject research entered into by NASA and another Government agency, private entity, non-Federal public entity, or foreign entity.

Protection of Human Research Subjects (Revalidated 7/7/08)

ARINC 724B-5-2003 航行器通信地址和报告系统1987包括附录1到5

Aircraft Communications Addressing and Reporting System (ACARS) 1987; Includes Supplements 1 Through 5

Aircraft Communications Addressing and Reporting System (ACARS) 1987; Includes Supplements 1-5

AECMA PREN 9110-2003 航空航天系列.质量系统质量保证应用维护机构.P2版

This standard includes IS0 9001:2000 1 ) quality management system requirements and specifies additional requirements for a quality management system for aerospace maintenance organizations. The additional aerospace requirements are shown in bold, italic text.

Aerospace series Quality systems Model for quality assurance applicable to maintenance organizations Edition P 2

ARINC 735A-1 ITEM 2.0-2003 可交换性标准

Interchangeability Standards

Interchangeability Standards

ARINC 735A-1 APP-2003 附录

Appendices

Appendices

ARINC 735A-1-2003 Mark 2交通警报和防止空中相撞系统1997包括附录1

Mark 2 Traffic Alert and Collision Avoidance System (TCAS) 1997; Includes Supplement 1

Mark 2 Traffic Alert and Collision Avoidance System (TCAS) 1997; Includes Supplement 1

ARINC 735A-1 BOOK-2003 Mark 2交通警报和防止空中相撞系统1997包括附录1

Mark 2 Traffic Alert and Collision Avoidance System (TCAS) 1997; Includes Supplement 1

Mark 2 Traffic Alert and Collision Avoidance System (TCAS) 1997; Includes Supplement 1

ARINC 735A-1 SUPP-2003 附录

Supplement

Supplement

ARINC 635-4 APP-2003 附录

Appendices

Appendices

QJ 9000A-2003 质量管理体系要求

Quality Management System Requirements

ARINC 635-4 BOOK-2003 高频数据链接协议195包括附录1到4

HF Data Link Protocols 1995; Includes Supplements 1 Thru 4

HF Data Link Protocols 1995; Includes Supplements 1 Thru 4