V00 标准化、质量管理 标准查询与下载

NAVY MIL-STD-1608 C NOTICE 1-1990 女式外套制服质量评估条文

scope of this standard is to provide standardized provisions for evaluating the quality of women's d resscas.

PROVISIONS FOR EVALUATING QUALITY OF COATS, WOMEN'S, DRESS

NAVY MIL-STD-1609 C-1990 女式衬衫质量评估条文

The purpose of this standard is to provide standardized provisidr evaluating the quality of Women's dress, semi-dress, and utility skirts.

PROVISIONS FOR EVALUATING QUALITY OF WOMEN'S SKIRTS

HB/Z 155-1989 航空用钢及高温合金供应厂工程认可规范

本规范规定了使用厂对供应厂的选择、供应厂生产资格的认可、供应厂试生产和成批生产的冶金工艺及其检验方法的认可以及供应厂有关重要更改的批准程序与要求。 　　本规范适用于制造航空、舰艇和地面燃气涡轮发动机转动零部件和重要结构件用钢和高温合金材料及其制造锻件的供应厂家。上述的供应厂应按本规范履行工程认可程序。 　　只有当航空制造厂在工程图纸、材料及其锻件标准或订货合同上载明本规范号时，经与供应厂家协商并被供方接受后，本规范才具有法规性效力。 　　本规范应与材料标准或（和）锻件标准同时使用。

Code for engineering approval of aviation steel and superalloy suppliers

HB/Z 154-1989 航空用钢及高温合金熔炼和成材工艺认可规范

本规范规定了航空用钢及高温合金熔炼和成材工艺认可的程序和要求。 　　本规范适用于在航空用钢及高温合金材料的订货单、订货技术条件或订货图纸规定供应厂需按HB/Z155-89接受使用厂的认可时，材料熔炼和成材工艺必须按本规范规定的程序和要求进行认可。本规范只有在使用厂与材料供应厂协商并被供方接受后才具有法规性效力。

Specification for approval of melting and forming process of aerospace steel and superalloy

HB/Z 156-1989 航空用钢及高温合金锻件生产工艺认可规范

本规范规定了航空用钢及高温合金锻件生产工艺认可的程序和要求。 　　本规范适用于当航空用锻件的订货单、订货技术条件或订货图纸规定须按HB/Z　155-89认可时，锻造厂的生产工艺应按本规范规定的程序和要求进行认可。本规范只有在使用厂与锻造厂协商并被锻造厂接受后才具有法规性效力。

Specification for production process approval of aviation steel and superalloy forgings

AECMA PREN 3368-1990 航空航天系列.测针设计标准基孔.P1版

This .Aerospace Series. pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Commission following comment by the Member countries.

Aerospace Series Aerospace Design Standard Holes for Locating Pins Issue P 1

NAVY MIL-STD-1613 B-1990 手套,皮革制品和制服质量评估条文

Approved for public release; distribution is unlimited.

PROVISIONS FOR EVALUATING QUALITY OF GLOVES, LEATHER, DRESS

ARINC 743 ITEM 2.0-1990 可交换性标准

Interchangeability Standards

Interchangeability Standards

SAE AS7002-1990 国家航空航天和国防合同方授信项目 (NADCAP)实施细则

This standard establishes rules for the implementation of the National Aerospace and Defense Contractors Accreditation Program (NADCAP) to accredit the capability of suppliers furnishing processes, products, and services for the aerospace and defense industries as provided for in specific programs. These rules shall be in compliance with the latest issue of Aerospace Standard AS7003.

National Aerospace and Defense Contractors Accreditation Program (NADCAP) Rules for Implementation

ARINC 744 ITEM 2.0-1990 可交换性标准

Interchangeability Standards

Interchangeability Standards

ICAO 7600-1990 国际民航组织的集会程序用章程

Standing Rules of Procedure of the Assembly of the International Civil Aviation Organization

Standing Rules of Procedure of the Assembly of the International Civil Aviation Organization

ARINC 614 APP-1989 附录

Appendices

Appendices

NAVY MIL-STD-1683 B-1989 船舷用插件和加套电缆的选择标准

CONNECTORS AND JACKETED CABLE, ELECTRIC, SELECTION STANDARD FOR SHIPBOARD USE

CONNECTORS AND JACKETED CABLE, ELECTRIC, SELECTION STANDARD FOR SHIPBOARD USE

AECMA PREN 2592-1989 航空航天系列温度补偿的、额定电流为25A及其以下的3极电路断路器规范.产品标准.第1版

This standard specifies the requirements relating to sheet. in aluminium alloy AL-P7475-, for use in the 02 condition, 1 .O mm I a I 6 mm. for aerospace applications

Aerospace Series Three-Pole Circuit Breakers Temperature Compensated Rated Currents up to 25 A Product Standard Edition 1

AECMA CTI/89/20337-1989 合作项目中特许经营/生产许可证体系的操作建议

Recommendations for the Operation of a Concession/Production Permit System for Collaborative Projects

ARINC 718-4-1989 Mark 3空中交通控制异频雷达收发机1978包括附录1到4

Mark 3 Air Traffic Control Transponder (ATCRBS/Mode S), 1978 (Includes Supplements 1 Through 4)

Mark 3 Air Traffic Control Transponder (ATCRBS/Mode S) 1978; Includes Supplements 1-4

AECMA PREN 2000-1989 航空航天系列.质量保证 EN航空航天产品生产厂质量体系认可 2版

It is essential that products defined by European Aerospace Series Standards (EN) conform with the requirements of these standards, and that the quality of the products be consistently maintained. To this effect, a qualification system, AECMA-CERT, for manufacturer and product is implemented. It is based upon :

Aerospace Series Quality Assurance EN Aerospace Products Approval of the Quality System of Manufacturers Edition 2

ARINC 718-4 BOOK-1989 Mark 3空中交通控制异频雷达收发机1978包括附录1到4

Mark 3 Air Traffic Control Transponder (ATCRBS/Mode S) 1978; Includes Supplements 1 Through 4

Mark 3 Air Traffic Control Transponder (ATCRBS/Mode S) 1978; Includes Supplements 1 Through 4

ARINC 604-1 BOOK-1988 机内测试设备设计指南1985包括附录1

Guidance for Design and Use of Built-In Test Equipment 1985; Includes Supplement 1

Guidance for Design and Use of Built-In Test Equipment 1985; Includes Supplement 1

ARINC 604-1 ATT-1988 附属装置

Attachments

Attachments