V01 技术管理 标准查询与下载

HB/Z 99.4-1987 飞机制造工艺工作导则 工艺文件编制工作条例

本条例规定了飞机工厂主要工艺文件的种类、编制要求、出版及更改方法。用于指导各飞机工厂工艺文件编制工作。 　　本条例适用于各种新飞机（包括自行设计、实物测绘、仿制设计和改型设计的飞机）在研制、试制和批生产阶段的工艺文件编制，而且主要适用于钣金冲压、机械加工、部件装配、总装试飞等各专业的工艺文件编制合作生产及研究机的工艺文件编制可参照实施。

Guidelines for Aircraft Manufacturing Process Work Regulations for Preparation of Process Documents

AECMA PREN 2583-1987 航空航天系列NI-P100HT(Inco 718)等级:1210 MPa/730℃ 技术规范.P1版

This «Aerospace Series» pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Ma férie1 Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approvedby the experts of the concerned AECMA Commission following comment by the Member countries

Aerospace Series Bolts in Heat Resisting Nickel Base Alloy NI-P100HT(Inco 718) Classification: 1275 MPa/650 Degrees Celsius Technical Specification Issue P 1

AECMA PREN 2311-1987 自润滑衬套的轴套筒技术规范

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make hut find it generally acceptable it would be helpful if you would notify US accordingly. Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Bushes with Self-Lubricating Liner Technical Specification Edition 1

AECMA PREN 2962-1987 航空航天系列碳丝纱线聚丙烯腈先驱技术规范

This draft is now available for public comment and your views and technical comments on it would be appreciated. If you have no specific comments to make but find it generally acceptable it would be helpful if you would notify us accordingly Suggestions entailing revision of the text should indicate the preferred wording. Please quote the relevant clause number against any comment.

Aerospace Series Carbon Fibre Filament Yarn (Polyacrylonitrile Precursor) Technical Specification

ARMY MIL-HDBK-786-1987 使用模拟声故障的声发射技术系统操作的声场保证

This standardization handbook was developed by the Department of Defense with the assistance of the U.S Army Materials Technology Laboratory and under accontract with Physical Acoustics Corporation.

FIELD ASSURANCE OF ACOUSTIC EMISSION SYSTEM OPERATION USING SIMULATED ACOUSTIC EMISSION EVENTS

HB/Z 109-1986 气相缓蚀材料应用说明书

本标准适用于航空工业系统金属材料、零组件、部件、备件及产品防护包装时采用气相缓蚀材料（包括结晶状或油状气相缓蚀剂、气相防锈纸、气相防锈薄膜，以及经气相缓蚀剂处理过的其它材料的使用方法。

Vapor Phase Corrosion Inhibition Material Application Note

NAVY MIL-A-18455 C-1986 技术氩

ThisspecificatiisoanpprovfeodrusebyallDepartmeanntdsAgencies oftheDepartmeonftDefense.

ARGON, TECHNICAL

JIS W 0901:1985 航空航天工业熔焊工人资格鉴定

この規格は，航空機，飛しょう体，その他の地上支援器材を含む航空宇宙用機器並びにそれらの部品及び附属品の融接工程に従事する溶接作業者及び自動溶接作業者の技量認定の手順について規定する。この規格は，契約文書に含まれている場合又は溶接作業者の技量認定について規定された文書がない場合のどちらにも適用する。

Aerospace fusion welders qualification

HB/Z 99.1-1985 飞机制造工艺技术工作条例

本条例规定了飞机制造工艺技术工作的任务、职责、内容，用于指导飞机工厂（含公司，下同）工艺系统的技术组织管理工作。工厂可依据本条例编制本厂的工艺技术工作细则。 　　本条例是在总结飞机工厂共同经验的基础上制订的。适用于自行设计、实物测绘、仿制及改型设计飞机（包括无人驾驶飞机、靶机）的制造工艺技术工作。外协任务可不采用本条例。

Aircraft Manufacturing Technology Work Regulations

JIS W 0905:1984 航空航天无损检验检查员的资格考核与合格证

この規格は，渦流探傷，浸透探傷，磁粉探傷，放射線透過及び超音波探傷の方法によって，航空宇宙用材料や部品の検査を行う非破壊検査員の教育訓練及び技量認定に関する最小限度の要求事項について規定する。

Aerospace nondestructive inspection personnel qualification and certification

ARMY MIL-HDBK-407 NOTICE 1-1984 污染控制技术的精确清洗方法和程序

The purpose of this document was to establish general data for operational and performance characteristics in handbook form in accordance with Defense Standardization Manual 4120.3-M for use in contamination control technology.

CONTAMINATION CONTROL TECHNOLOGY PRECISION CLEANING METHODS AND PROCEDURES

AECMA PREN 2587-1984 航空航天系列双叉线性胫 尺寸和负重

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted to CEN (European Committee for Standardization) as a draft European Standard.

Rod Ends, Adjustable Double Fork and Threaded Shank Dimensions and Loads

AECMA PREN 2515-1984 可调整单叉 尺寸和负荷.第1版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted to CEN (European Committee for Standardization) as a draft European Standard

Rod Ends, Adjustable Single Fork and Threaded Shank Dimensions and Load

AECMA PREN 2078-1982 航空航天系列.普通定义制造程序,检验图表和检验报告

This standard defines the manufacturing schedule, inspection schedule and inspection report which are the contractual documents.

Manufacturing Schedule - Inspection Schedule and Inspection Report - General Definitions Aerospace Series

AECMA PREN 2132-1982 航空航天系列.工程用途铬电解.第1版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA (Association Européenne des Construèteurs de Matériel Aérospatial).

Electrodeposition of Chromium for Engineering Purposes Aerospace Series Edition 1

QJ 17-1981 基本产品设计文件管理制度 线扎图绘制规则

Basic product design document management system line drawing rules

NAVY MIL-D-82659-1979 技术性二甘醇二丁酯醚

This specification covers one grade diethylene glycol dibutyl ethe.r referred to herein as "The material".

DIETHYLENE GLYCOL DIBUTYL ETHER, TECHNICAL

AECMA CTI/79/9343-1979 模块接线图的自动化建议

Recommendation for the Automation of Wiring Diagrams

NAVY MIL-L-82661 (1)-1978 技术用卵磷脂

This amenCanent f o m a part of Military Specification hiIL-L-82661, dated 31 Jan- 1977.

LECITHIN, TECHNICAL

NAVY DOD-D-82659 (1)-1978 技术性二甘醇二丁酯醚

This amendment forms a part of Military Specification MILD-82659, dated 31 January 1977.

DIETHYLENE GLYCOL DIBUTYL ETHER, TECHNICAL