V04 基础标准与通用方法 标准查询与下载

BS ISO 8625-4:2011 航空航天.液体系统.词汇.和控制/驱动系统相关的一般术语和定义

Aerospace. Fluid systems. Vocabulary. General terms and definitions relating to control/actuation systems

BS ISO 10789:2011 航天系统.计划管理.信息和文件管理

Space systems. Programme management. Information and documentation management

QJ 2893A-2011 航天产品代号的编制规定

Regulations on the compilation of aerospace product codes

BS ISO 14300-2:2011 航天系统.计划管理.产品保证

Space systems. Programme management. Product assurance

BS ISO 10794:2011 空间系统.计划管理.材料,机械零件和流程

Space systems. Programme management. Material, mechanical parts and processes

BS ISO 10795:2011 空间系统.计划管理和质量.词汇

Space systems. Programme management and quality. Vocabulary

SAE ARP5289A-2011 电子航空符号

This Aerospace Recommended Practice (ARP) provides design philosophies, guidelines, requirements, and a set of recommended symbols, lines, and linear patterns for aeronautical information presented on electronic flight deck display devices. Specifically, this document addresses symbols, lines, and linear patterns historically seen on aeronautical charts. It provides recommended symbols for navigation aids, airspace boundaries, missed approach holding patterns, etc. The document does not address all aeronautical symbols, lines, or linear patterns, nor does it provide specific recommendations about color, text and fonts, line weight, or symbol size. Additionally, it does not provide recommendations for non-aeronautical symbols such as traffic or weather. The general guidelines, recommendations and requirements are intended to apply regardless of whether the display application is intended for IFR or VFR operations and regardless of the type of aircraft (14 CFR Part 23, 25, 27, or 29). The recommendations are applicable to all electronic display applications within the flight deck, regardless of where they are located, such as on: Electronic Map Displays (EMD); Electronic Chart Displays; Electronic Flight Bags (EFB); Stand alone and Multi-Function Displays; Navigation Displays (ND) These recommendations also apply to symbols, lines, and linear patterns that are generated in real time from individual elements from an onboard database then overlaid onto a pre-composed image. They are not intended to apply to the electronic display of static pre-composed images in the form of a pre-existing graphic or file image. However, that does not preclude manufacturers of pre-composed images from using these recommendations. There are permanent benefits to be gained from industry standardization of the symbols specified in this document. For any aircraft, when new symbols are introduced to an existing function, they shall be compliant with this document. Upgrades to existing fleets or displays that do not introduce new aeronautical elements are encouraged but not required to comply with the symbology requirements in this document. These recommendations apply to two-dimensional displays. While the recommendations in this document do not specifically address 3-D display symbology, the guidance and recommendations may also be appropriate for 3-D displays.

Electronic Aeronautical Symbols

SAE AIR5875-2011 飞行控制系统异常调查方法

This SAE Aerospace Information Report (AIR) outlines comprehensive aircraft flight controlsystem fault isolation methodology that has proven to be effective. The methodologypresented in this Information Report has been used in several successful fault isolation effortson military aircraft.

Methodology for Investigation of Flight Control System Anomalies

BS ISO 14300-1:2011 航天系统.计划管理.项目构建

Space systems. Programme management. Structuring of a project

BS ISO 17566:2011 航天系统.通用试验文件

Space systems. General test documentation

HB/Z 20007-2011 《飞机数字化预装配通用要求》实施指南

本指导性技术文件对HB 7803-2006《飞机数字化预装配通用要求》条文进行了展开说明,并给出了主要实施要点和相关示例。本指导性技术文件适用于在飞机研制过程中进行数字化预装配技术的应用。

Implementing guide of the general requirements for digital pre-assembly (DPA) of airplane

HB/Z 20011-2011 航空金属零件孔和槽口压印强化工艺

本指导性技术文件规定了航空铝合金零件孔和槽口边缘压印强化工艺的设备、模具、工艺过程控制、质量控制、人员和安全等要求。 本指导性技术文件适用于航空铝合金零件孔和槽口（燃油通过油孔、电缆通过孔、口盖开口等)的压印强化，其他金属零件的压印强化可参照使用。

Coin strengthening technology of holes and slots for aerial metal parts

HB/Z 20004-2011 纤维增强金属层板结构装配工艺

本指导性技术文件规定了纤维增强金属层板结构件装配的材料、刀具、工艺控制、质量控制、人员、安全等。 本指导性技术文件适用于飞机芳纶纤维增强金属层板结构的装配，其他纤维增强金属层板可参照使用。

Assembly technology of fiber reinforced metal laminates structure

HB 20074-2011 飞机数字化制造流程定义与控制要求

本标准规定了飞机数字化制造过程中工艺数字化设计、工装数字化设计与制造、零组件数字化制造、产品数字化装配、数字化检测等环节的流程定义与控制要求。本标准适用于军、民用飞机等航空产品生产项目。

Digital manufacturing flow definition and control requirements for airplane

QJ 20028-2011 航天专用工艺装备分类与代码

本标准规定了航天专用工艺装备的分类原则和方法、编码结构与编码方法以及航天专用工艺装备标识码的编制规则，并给出了航天专用工艺装备分类代码表。 本标准适用于航天产品研制、生产中工艺装备的标识和管理。

Classification and codes of special tooling for aerospace

QJ 3115A-2011 导管熔焊接头角焊缝X射线照相检验方法

本标准规定了航天产品用导管熔焊接头角焊缝X射线照相检验的-般要求、透照、暗室处理、评定、技术控制、检验记录、检验报告及资料归档等要求。 本标准适用于壁厚为0.3mm～6.0mm,直径不大于102mm，材料为钢、高温合金、铝合金、钛及钛合金等，接头形式为对接接头、管-管T形接头、管-板T形接头、角接接头、套管接头的导管熔焊接头角焊缝X射线照相检验。

X-ray radiographic testing method for fillet weld of fusion-welded joints for pipe

QJ 20001-2011 月球探测工程术语

本标准规定了月球探测工程研制和应用的基本术语。 本标准适用于月球探测工程及其有关领域。

Terminology for lunar exploration program

QJ 20060-2011 基于ADAMS的机构动力学仿真通用要求

本标准规定了使用ADAMS软件进行机构动力学仿真分析的数据准备、分析流程、文档编写与管理等要求。 本标准适用于使用ADAMS软件进行机构动力学仿真分析及其文档的编写和管理。采用其它软件进行机构动力学仿真时可参照使用。

General requirements for dynamic analysis of mechanical system based on ADAMS

QJ 3050A-2011 航天产品故障模式、影响及危害性分析指南

本标准为航天产品实施故障模式及影响分析（FMEA)与故障模式、影响及危害性分析（FMECA)提供指南。 本标准适用于航天产品研制过程中实施设计FMEA与FMECA、软件FMEA、工艺FMEA等工作。

Guide of failure modes effects and criticality analysis for space products

QJ 20029-2011 航天弹体切割索与削弱槽对中度X射线照相检验方法

本标准规定了切割索与削弱槽对中度X射线照相检验的-般要求、技术准备、透照、暗室处理、评定、检验记录、检验报告及归档等要求。 本标准适用于航天弹体聚能切割索与削弱槽装配对中度的X射线照相检验。X射线数字成像检验可参照执行。

X-ray radiographic testing method for center coincidence departure between cutting charges and weakening groove of aerospace missile body