V04 基础标准与通用方法 标准查询与下载

BS ISO 16192:2010 航空航天系统.空间计划中的经验获取(经验学习).原理和指南

Space systems - Experience gained in space projects (Lessons learned) - Principles and guidelines

SAE ARP4386C-2010 航空流体动力,传动和控制技术用术语和定义

This SAE Aerospace Recommended Practice (ARP) comprises the technical terms and nomenclature together with their definitions and abbreviations used in the fluid power actuation and control technologies.

Terminology and Definitions for Aerospace Fluid Power, Actuation and Control Technologies

ISO 23461:2010 航天系统.计划管理.不一致性控制系统

This International Standard specifies a control system for non-conformances related to any product for space systems, such as electrical, electronic, and electromechanical components and software, as well as operational non-conformances and anomalies. This International Standard applies to all deliverable products and supplies, at all levels, which fail to conform to specification requirements and design baselines. This International Standard is applicable throughout phases of: a) procurement, production, qualification, integration, and test; b) acceptance, delivery, and transportation; c) launch preparation and flight or launch readiness; d) operational validation or qualification; e) operation; f) refurbishment. This International Standard also specifies requirements for the interfaces with company internal nonconformance reporting and processing. Engineering changes lie outside the scope of this International Standard.

Space systems - Programme management - Non-conformance control system

ISO 16192:2010 航天系统.空间计划中的经验获取(经验学习).原则和指南

This International Standard outlines lessons learned principles and guidelines that are applicable in all space project activities (management, technical, quality, cost and schedule). The application of this International Standard is intended to be included in the supplier quality management system, but can be tailored in individual contracts as agreed by the customer and supplier, depending on ? the content of each project (size, technological level and novelty, particular organization, participants, etc.), and ? the interest and usefulness of the related information. The lessons learned information can result from any situations which might be encountered in similar contexts for future projects, i.e. ? undesirable experiences that need to be avoided; ? strategies, rules, principles of design, validation, tests and operations that proved to be successful or necessary. This International Standard neither endorses nor recommends the transmission of company proprietary information to external entities as part of a lessons learned process. Implementing a formal lessons learned process as outlined in this International Standard makes it possible to capture and benefit from this information.

Space systems - Experience gained in space projects (Lessons learned) - Principles and guidelines

BS EN 4179:2009 航空航天系列.无损检验人员的资格和审批

1.1 Purpose This European Standard establishes the minimum requirements for the qualification and certification of personnel performing non-destructive testing (NDT), non-destructive inspection (NDI), or non-destructive evaluation (NDE) in the aerospace manufacturing, service, maintenance and overhaul industries. For the purposes of this standard, the term NDT is used and is considered equivalent to NDI and NDE. In Europe, the term “approval” is used to denote a written statement by an employer that an individual has met specific requirements and has operating approval. Certification per EN ISO/IEC 17024 is not required by this standard unless specified by local or regulatory requirements. The term “certification” as defined in 3.1 is used throughout this standard as a substitute for the term “approval”. Except when otherwise specified in the written practice, certification in accordance with this standard includes operating approval. 1.2 Applicability This standard applies to personnel using NDT methods to test and/or accept materials, products, components, assemblies or sub-assemblies. This standard also applies to personnel directly responsible for the technical adequacy of the NDT methods used, who write NDT procedures and/or work instructions, who audit NDT facilities, or who provide technical NDT support or training. This standard does not apply to individuals who only have administrative or supervisory authority over NDT personnel or to research personnel developing NDT technology for subsequent implementation and approval by a certified Level 3. Personnel performing specialized inspections using certain direct readout instruments as determined by a Level 3 certified in the method, do not require qualification or certification to this standard. 1.3 Implementation This standard addresses the use of a National Aerospace NDT Board (NANDTB). NANTDBs are only used as specified herein and it is not mandatory to have such a board for compliance with this document. Personnel certified to previous revisions of NAS 410 or EN 4179 need not recertify to the requirements of this standard until their current certification expires. 1.4 Common methods This standard contains detailed requirements for the following common NDT methods: Penetrant testing (PT) Magnetic testing (MT) Eddy current testing (ET) Ultrasonic testing (UT) Radiographic testing (RT) Thermographic testing (TT) Shearographic testing (ST) 1.5 Other methods When invoked by engineering, quality, cognizant engineering organization or prime contractor requirements, this standard applies to other current and emerging NDT methods used to determine the acceptability or suitability for intended service of a material, part, component, sub-assembly or assembly. Such methods may include, but are not limited to, acoustic emission, neutron radiography, leak testing and holography. The requirements for personnel training, experience, and examination for these other methods should be established in accordance with 6.4 and documented by the employer.

Aerospace series - Qualification and approval of personnel for non-destructive testing

ASTM F330-10 航空航天用透明外壳鸟撞试验的标准试验方法

This test method may be used for: bird impact testing of aircraft crew compartment transparencies and supporting structure to verify the design; compilation of test data for use in verification of future transparency and supporting structure design and analytical methods; and comparative evaluation of materials.1.1 This test method covers conducting bird impact tests under a standard set of conditions by firing a packaged bird at a stationary transparency mounted in a support structure. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 8.

Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

GJB 6888-2009 军用直升机任务管理系统通用规范

本规范规定了军用直升机任务管理系统的通用要求。 本规范适用于军用直升机任务管理系统。

General specification of mission management system for military helicopter

ISO 26870:2009 空间系统.发射台和集成站点操作文档

Space systems - Launch pad and integration site operational documents

KS W ISO 11104:2009 空间数据和信息传输系统.时间码格式

시간 코드는 시간 정보의 디지털 표현이다. 4개의 CCSDS 권장 시간 코드들은(하나는 분

Space data and information transfer systems-Time code formats

KS W ISO 11754:2009 航空数据和信息发送系统.遥测通道编码

이 표준의 목적은 우주데이터시스템자문위원회(CCSDS) 소속 기관의 시설과 임무들 간 교차

Space data and information transfer systems-Telemetry channel coding

SAE AIR5719-2009 复合保养和修理中关键技术问题认知分类的教学要点

This document is to be used as a checklist by curriculum developers to create awareness training for critical composite repair and maintenance issues. This document will not take place of training requirements for specific job roles of a composite repair technician or engineer. The purpose of this AIR is to establish a standard teaching checklist for an awareness course covering the critical technical issues associated with the maintenance and repair of composite aircraft structures. This document describes terminal course objectives (TCOs) and teaching points, which in combination serve as a course checklist for organizations developing this awareness course.

Teaching Points for an Awareness Class on Critical Issues in Composite Maintenance and Repair

GJB 6776.5-2009 空间目标测轨编目方法 第5部分：轨道内容与格式

本部分规定了空间目标测轨编目中编目轨道的内容与格式。 本部分适用于空间目标测轨编目轨道的数据交换与发布。

Method for space object detection and catalogue.Part 5:Content and format of orbital data

GJB 6776.6-2009 空间目标测轨编目方法 第6部分：轨道预报方法

本部分规定了基于空间目标编目轨道的预报方法。 本部分适用于利用编目轨道进行轨道预报。

Method for space object detection and catalogue.Part 6:Orbit prediction method

GJB 6676.1-2009 潜地战略导弹飞行试验结果分析与评定.第1部分:研制性飞行试验

本部分规定了潜地战略核导弹（以下简称导弹）研制性飞行试验结果分析的依据、步骤、内容、方法和要求以及对飞行试验结果的评定。 本部分适用于导弹研制性飞行试验结果分析与评定。

Analysis and evaluation of flight test result on submarine-to-ground strategic missile.Part 1:Development flight test

GJB 6771-2009 导弹、航天器飞行试验测控设备数字引导计算方法

本标准规定了导弹、航天器飞行试验测控设备跟踪的数字引导计算方法。 本标准适用于导弹、航天器飞行试验无线电测量设备、光学测量设备跟踪的数字引导计算。

TT&C equipments digital leading calculating method for missile and spacecraft flight mission

GJB 6776.4-2009 空间目标测轨编目方法 第4部分：定轨方法

本部分规定了空间目标编目中的轨道确定方法。 本部分适用于空间目标编目定轨。

Method for space object detection and catalogue.Part 4:Orbit determination method

GJB 2423A-2009 榴弹发射器定型试验规程

本标准规定了榴弹发射器设计定型试验的要求、试验内容、试验方法与结果评定方法。 本标准适用于各种自动、半自动、非自动榴弹发射器的设计定型试验，其他性质的试验亦可参照使用。

Approval test procedure of grenade launcher

GJB 6676.2-2009 潜地战略导弹飞行试验结果分析与评定.第2部分:定型(鉴定)飞行试验

本部分规定了潜地战略导弹（以下简称导弹）定型（鉴定）飞行试验结果分析的依据、步骤、内容、方法和要求以及对飞行试验结果的评定。 本部分适用于导弹定型（鉴定）飞行试验结果分析与评定。

Analysis and evaluation of flight test result on submarine-to-ground strategic missile.Part 2：Approval evaluation flight test

GJB 6671-2009 反舰导弹定型试验规程

本标准规定了反舰导弹定型试验、试验方案、实施程序、试验技术要求和试验结果评定原则。 本标准适用于反舰导弹定型试验基地试验（简称定型试验）。研制试验、部队试验和生产定型试验可参照使用。

Code for finalized test of anti-ship missile

GJB 6772-2009 导弹（运载火箭）外测应答机测试、对接要求

本标准规定了航天发射场导弹(运载火箭)外测应答机测试、对接的内容、方法及应遵循的一般技术要求。 本标准适用于航天发射场导弹(运载火箭)外测应答机测试、对接。

Unit checkout and matching test requirements for responder of missile(launch vehicle)tracking telemetry and command system