V04 基础标准与通用方法 标准查询与下载

HB 7805-2006 工程更改控制

本标准规定了航空产品工程更改控制的要求、程序和方法等。 本标准适用于航空产品研制和生产各阶段的工程更改。

Engineering change control

HB 7804-2006 数控设备综合应用效率与测评

本标准规定了数控设备综合应用效率的度量体系、各项度量域定义和测评方法。 本标准适用于航空制造业数控加工设备（以下简称“数控设备”）综合应用效率的测评，其它机械加工设备也可参照执行。

Overall application efficiency and evaluating of NC equipment

GJB 5884-2006 直升机“地面共振”试验要求

本标准规定了直升机“地面共振”计算分析所需的部件特性试验和“地面共振”试验的通用要求。 本标准适用于单旋翼带尾桨直升机，其他类型的直升机可参照使用。

Requirements for test of helicopter ground resonance

GJB 5496.5-2005 航空炸弹试验方法 第5部分：一般检测 质量、质心位置 电子检测法

本部分规定了航空炸弹质量、质心位置的电子检测方法。 本部分适用于航空炸弹质量、质心位置的测量。

Test method of aerial bomb Part 5:General inspection-Electronic test method-Mass mass center location

DIN EN 14607-1:2006 航天工程. 机械. 第1部分: 热控制; 英文版本EN 14607-1: 2004

Space engineering - Mechanical - Part 1: Thermal control; English version EN 14607-1:2004

DIN EN 14607-2:2006 航空工程. 机械方面. 第2部分: 结构; 英文版本EN 14607-2: 2004

This part 2 of space engineering - mechanical defines the mechanical engineering requirements for structural engineering.

Space engineering - Mechanical - Part 2: Structural; English version EN 14607-2:2004

ISO 21849:2006 飞行器和太空.工业数据.产品识别和可追溯性

This International Standard specifies the requirements for a product identification and traceability schema for life cycle management of aircraft and space products/parts. It specifies the minimum essential identification information needed for traceability of a product for its life cycle. It also provides the data structures for use with automatic identification technologies that support product/part life cycle data management activities. This International Standard defines a structure and rules for establishing a unique identifier for product/part identification and traceability. The rules and structure provide sufficient options to support various business practices. They provide the minimum amount of standardization required to support interoperability, improved business processes and efficiency across multiple users and applications of machine-readable media technologies. This International Standard also defines and establishes repeatable processes to allow efficient exchange of product data for life cycle product/part traceability, configuration, reliability, maintenance, and product performance management purposes. It specifies the data carriers appropriate for representing the product data in a machine-readable form and associated dimensional and quality parameters. Industries or trading partners will need to develop specific implementation guidelines to employ the principles defined in this International Standard. Although primarily intended for aircraft and space products/parts, this International Standard may be used for other products/parts where desired.

Aircraft and space - Industrial data - Product identification and traceability

GJB 5820-2006 地地弹道式导弹飞行试验发射预案编制要求

本标准规定了地地弹道式导弹飞行试验发射预案（以下简称“发射预案”）的内容及编制要求。 本标准适用于地地弹道式导弹飞行试验发射预案的编制。其他类型导弹飞行试验发射预案的编制可参照使用。

Requirement for framing launch plan of ground-to-ground missile

GJB 5811-2006 反坦克导弹武器系统训练模拟器通用规范

本规范规定了反坦克导弹武器系统训练模拟器的通用要求。 本规范适用于反坦克导弹武器系统训练模拟器（以下简称模拟器）。

General specification for training simulator of anti-tank missile weapon system

GJB 5846-2006 运载火箭用户手册编写要求

本标准规定了运载火箭用户手册编写的主要内容和编写格式。 本标准适用于运载火箭用户手册的编写，在应用时可以根据具体情况进行载剪。

Requirement of launch vehicle user's manual

GJB 180A-2006 低速风洞飞机模型设计准则

本标准规定了低速风洞飞机模型的设计要求以及制造、检验的精度要求。 本标准适用于我国3m量级低速风洞飞机模型的设计。其它量级低速风洞的飞机模型和其它类型的试验模型可参考使用。

Design criteria of aircraft test model in low speed wind tunnel

GJB 5789-2006 常规导弹武器装备战场抢修手册编写要求

本标准规定了常规导弹武器装备战场抢修手册的内容、格式要求和编制方法。 本标准适用于常规导弹武器装备战场抢修手册（以下简称战场抢修手册）的编写工作。

Requirements of preparation of battlefield repair manuals for conventional missile weapon materiel

GJB 5774-2006 空地导弹靶场试验规程

本标准规定了空地导弹（以下简称导弹）靶场试验的项目、内容、程序、方法和要求。 本标准适用于各种型号空地导弹的靶场试验。其它空对地攻击武器的靶场试验亦可参照使用。

Code for range test of air-to-ground missile

GJB 2988A-2006 自由飞弹道靶模型设计准则

本标准规定了自由飞弹道靶试验模型的设计原则和要求。 本标准适用于发射速度为7km/s以下试验模型的设计。高于7km/s发射速度的试验模型设计也可参考使用。

Design criteria for free flight ballistic range models

GJB 5773-2006 地空导弹武器系统飞行试验弹道评定方法

本标准规定了地空导弹武器系统飞行试验弹道评定的一般要求及方法。 本标准适用于新型地空导弹武器系统工程研制、设计定型、生产定型、批生产抽检等飞行试验，也适用于改进、改型或引进型地空导弹武器系统鉴定试验。其他类型导弹武器系统飞行试验可参照使用。

Flight test trajectory evaluation method for ground-to-air missile weapon system

DLA MS35420 REV A VALID NOTICE 2-2006 清除标号防空灯镜头

MS35420A, dated 14 September 2001, has been reviewed and determined to be valid for use in acquisition.

LENS, CLEARANCE MARKER LIGHT, BLACKOUT

DLA MS35421 REV A VALID NOTICE 2-2006 清除标号服务灯镜头

MS35421A, dated 14 September 2001, has been reviewed and determined to be valid for use in acquisition

LENS, CLEARANCE MARKER LIGHT, SERVICE

ISO 15860:2006 航天系统.气体污染.现场试验测量方法

This International Standard covers gases (air, nitrogen, helium, and argon) compressed up to 40 MPa used in systems and units of space vehicle launch and technical complexes. This International Standard determines compressed gas impurities (mechanical impurities, water vapour, oil, and foreign gases) content measurement methods. This International Standard can be used by countries and firms participating in the development, redesign, modernization, and maintenance of space vehicle launch sites and technical complexes.

Space systems - Gas contamination - Measurement methods for field tests

BS ISO 21459:2006 空间数据和信息传输系统.接近1的空间链接协议.编码和同步传输内层

Proximity space links are defined to be short-range, bi-directional, fixed or mobile radio links, generally used to communicate among probes, landers, rovers, orbiting constellations, and orbiting relays. These links are characterized by short time delays, moderate (not weak) signals, and short, independent sessions. ISO 21459:2006 defines the coding and synchronization sublayer of the Proximity-1 space link protocol. It defines the data unit of this sublayer, i.e. the PLTU. It defines the coding and synchronization mechanisms required for cross support. It also specifies the send and receive side functionality of this sublayer. ISO 21459:2006 does not specify individual implementations or products, implementation of service interfaces within real systems, methods or technologies required to perform the procedures, or management activities required to configure and control the protocol.

Space data and information transfer systems - Proximity-1 space link protocol - Coding and synchronization sublayer

ISO 21460:2006 空间数据和信息传输系统.接近1的空间链接协议.物理层

Space data and information transfer systems - Proximity-1 space link protocol - Physical layer