V07 电子计算机应用 标准查询与下载

GJB 6776.1-2009 空间目标测轨编目方法 第1部分：编号方法

本部分规定了空间目标测轨编目中空间目标，空间目标探测设备、测轨编目处理中心和设备点位的编号方法与属性描述。 本部分适用于我国空间目标测轨编目中空间目标、空间目标探测设备、测轨编目处理中心和设备点位的编号与属性描述。

Method for space object detection and catalogue.Part 1:Numbering method

ISO 15887:2000/Cor 1:2009 空间数据和信息传输系统.数据系统.无损数据压缩.技术勘误表1

Space data and information transfer systems - Data systems - Lossless data compression; Technical Corrigendum 1

BS ISO 24637:2009 航天系统.电磁干扰(EMI)测试报告要求

Space systems - Electromagnetic interference (EMI) test reporting requirements

SAE AS6009-2009 JAUS 移动服务集

This document defines a set of standard application layer interfaces called JAUS Mobility Services. JAUS Services provide the means for software entities in an unmanned system or system of unmanned systems to communicate and coordinate their activities. The Mobility Services represent the platform-independent capabilities commonly found across all domains and types of unmanned systems. At present, 15 services are defined in this document. Some examples include: Pose Sensors: Determine the instantaneous position and orientation of a platform in global or local coordinates; Velocity State Sensor: Determines the instantaneous velocity of a platform; Acceleration State Sensor: Determines the instantaneous acceleration of a platform; Primitive Driver: Performs basic mobility for a platform based on force/torque efforts; Vector Drivers: Perform closed loop mobility for straight line travel; Velocity State Driver: Similar to vector drivers, but with additional degrees of freedom; Waypoint Drivers: Perform closed loop mobility to a location specified; Waypoint List Drivers: Performs closed loop mobility using a series of locations; Path Segment Drivers: Performs closed loop mobility along a specified path. Each service is described by a JAUS Service Definition (JSD) which specifies the message set and protocol required for compliance. Each JSD is fully compliant with the JAUS Service Interface Definition Language (JSIDL). The purpose of this document is to facilitate interoperation of unmanned vehicle systems, subsystems, and payloads by standardization of the message set and associated protocol.

JAUS Mobility Service Set

BS DD IEC/TS 62239:2008 航空电子学用程序管理.电子部件管理方案的制备

Process management for avionics - Preparation of an electronic components management plan

BS ISO 26868:2009 空间数据和信息传输系统.图像数据压缩

Space data and information transfer systems - Image data compression

BS ISO 21460:2007 航空数据和信息传输系统.接近1的航空链接协议.物理层

Space data and information transfer systems - Proximity-1 space link protocol - Physical layer

BS ISO 22666:2007 航空数据和信息传输系统.AOS(高级轨道运行系统)航空数据链接协议

Space data and information transfer systems - AOS (advanced orbiting systems) space data link protocol

SAE AS5658-2009 平台/子系统通用接口控制文件格式

This SAE Aerospace Standard (AS) defines the editorial format and policies necessary for the publication of platform/subsystem Interface Control documents. The Common Interface Control Document Format Standard defines a common format for platform to subsystem interface documents to facilitate subsystem integration. This aerospace standard specifies the common technical data sections for the Common Interface Control Document Format down to the third header level for the majority of sub-sections. The Common Interface Control Document Format Aerospace Standard provides a structured document format in appendixes supported by example paragraphs, drawings, etc. The Platform/Subsystem Common Interface Control Document Format standardizes the document format to be utilized to define and document platform/subsystem interfaces. A common document format is desired to facilitate subsystem integration in new or already existing platforms. This standard applies to new Platform/Subsystem Interface Control Documents, and may be applied to existing subsystem ICDs when they are being revised.

Platform/Subsystem Common Interface Control Document Format

DIN EN 9200:2009 航空航天系列.程序管理.项目管理规范指南

For a given aerospace project, the present document is intended to be used as a reference to current best practices. These can be used as a guideline for the creation and negotiation of the project management specification between a customer and a supplier, and hence lead to the creation of the project management plan. It may be used for any project utilising several actors at different levels. In particular in the case of large projects it presents provisions recommended for the management of a project according to (see Figure 1 ): -- project organisation, -- work breakdown structure, -- phasing and scheduling, -- risk management, -- configuration management, -- documentation management, -- interfaces with other disciplines, -- project monitoring and control, -- technical performance control, -- cost control, -- schedule control, -- resource management, -- quality assurance, -- project closure.

Aerospace series - Programme management - Guidelines for project management specification; German and English version EN 9200:2004

ISO/TS 16457:2009 空间系统.空间环境(自然和人工).地球电离层模块:国际参考电离层(IRI)模块和对等离子体层的扩展件

Space systems - Space environment (natural and artificial) - The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere

ISO 26868:2009 空间数据和信息传输系统.图像数据压缩

Space data and information transfer systems - Image data compression

MH/T 0029-2009 民航科学数据共享元数据内容

本标准对民航领域科学数据共享元数据进行摘要描述，规定了民航科学数据共享元数据的模式和数据类型信息，提供了共享元数据包UML图和数据字典。本标准适用于民用航空领域科学数据集元数据整理、建库、汇编、发布和查询。

Metadata content for science data sharing of civil aviation

SAE AIR5566-2008 公共发射可接受地区通路要求文件(CLARA RD)

CLARA identifies four functions: Data Space Generator, Truth Data Generator, Coefficient Generator, and Reconstructor. Together these four functions standardize the solution to the LAR problem. This document identifies the requirements associated with the four CLARA functions.

Common Launch Acceptability Region Approach Requirements Document (CLARA RD)

BS DD IEC/TS 62396-2:2008 航空电子设备的程序管理.大气辐射影响.航空电子设备单一作用效应测试指南

Process management for avionics - Atmospheric radiation effects - Guidelines for single event effects testing for avionics systems

BS DD IEC/TS 62396-5:2008 航空电子设备的程序管理.大气辐射影响.航空电子 设备中热中子通量和效应的评估指南

Process management for avionics - Atmospheric radiation effects - Guidelines for assessing thermal neutron fluxes and effects in avionics systems

QJ 2187A-2008 弹道式导弹和运载火箭飞行软件仿真试验要求

Ballistic missile and launch vehicle flight software simulation test requirements

QJ 3318-2008 弹（箭）载计算机试验要求

本标准规定了彈(箭)裁计算機整機的试验項目、试验技术要求和试验方法。 本标准适用于运载火箭、战略导弹和战术导弹弹(箭)載计算機的設計、生產、试验和驗收。

Projectile (Arrow) Loading Computer Test Requirements

QJ 3300-2008 航天型号DSP-TMS系列汇编语言编程要求

Assembly Language Programming Requirements for Aerospace Model DSP-TMS Series

QJ 3126A-2008 航天软件产品保证要求

Aerospace Software Product Assurance Requirements