V07 电子计算机应用 标准查询与下载

SAE AS4710-1993 PI总线

This standard defines a bus and module interface to the Pi-Bus. This standard specifies the requirements/functions for the Pi-Bus side of a bus interface unit (BIU) needed to facilitate the interoperability of modules on a Pi-Bus for avionics systems. The corresponding software/device side interface requirements are not specified in this standard.

PI-BUS

SAE ARP4294-1992 用于生命周期成本信息的数据格式和规程

This SAE Aerospace Recommended Practice (ARP) 4294 is directed at life cycle cost (LCC) analysis of aerospace propulsion systems and supplements AIR1939. Specific topics addressed by ARP4294 are listed below: a) propulsion system LCC element structure; b) information exchange and relationship with: 1) aircraft manufacturer, 2) equipment suppliers, and 3) customer; c) the relationship of the LCC element structure to work breakdown structures; d) the relationship between LCC analysis and other related disciplines (e.g., technical (performance analysis, weight control, component lives), reliability, availability and maintainability (RAM), integrated logistic support (ILS), production and finance); and e) classification of the accuracy and applicability of LCC assessments.

Data Formats and Practices for Life Cycle Cost Information

AECMA PREN 3758-1992 航空航天系列.单通道高速数据传输系统

This Technical Report was drawn up by Technical Committee C4 of the AECMA Standardization Committee.

Aerospace Series Simplex High Speed Data Transmission System Issue P 1

HB 6546-1991 民用航空器大气数据计算机最低性能要求

本标准规定了用于亚音速飞机的大气数据计算机设备在标准条件和环境条件下的最低性能要求。 　　本标准适用于大气数据计算机设备（以下简称计算机）。当其与飞机电源、静压、总压、外界大气温度以及由制造人规定的其他输入源（单独或联合）连接时。

Minimum performance requirements for civil aircraft air data computers

HB 6557-1991 飞机油箱防火防爆装置通用规范

本规范规定了飞机油箱或油箱舱防火防爆装置或系统的设计、性能及试验的通用要求。 　　本规范适用于抑制由雷击、炮击、加油、发动机故障等引起着火的飞机油箱、油箱舱（或干隔舱）的防火防爆装置或系统的设计、试验。

General specification for fire and explosion protection devices of aircraft fuel tanks

HB 6489-1991 地面计算机测控系统输入输出子系统性能鉴定要求和方法

本标准规定了地面计算机测控系统输入输出子系统性能鉴定试验的要求和方法。 　　本标准适用于地面计算机测控系统输入输出子系统的定型鉴定、同类产品的性能比较及产品在交付或使用中某些性能的验证。本标准适用于在地面上应用的计算机测控系统输入输出子系统的性能评定，也可作为机载和弹载用计算机测控系统输入输出子系统性能评定的参考。本标准不适用于对被测系统测到的原始数据使用软件进行事后处理、加工而进一步提高其性能的系统的评定。

Requirements and methods for performance appraisal of input and output subsystems of ground computer measurement and control system

HB 6467-1990 软件配置管理计划编制规定

Software Configuration Management Plan Preparation Regulations

HB 6455-1990 用数字计算机程序表示航空涡轮发动机瞬态性能的方法

A method for expressing the transient performance of an aero turbine engine with a digital computer program

HB/Z 183-1990 Ada编程支持环境（APSE）公用接口

Ada Programming Support Environment (APSE) Common Interface

HB 6452-1990 用数字计算机程序表示航空涡轮发动机稳态性能的方法

A method for representing the steady-state performance of an aero turbine engine with a digital computer program

HB 6465-1990 软件文档编制规范

Software Documentation Specification

HB 6464-1990 软件开发规范

Software Development Specification

HB 6466-1990 软件质量保证计划编制规定

Software Quality Assurance Plan Preparation Regulations

SAE AIR4276-1990 调查结果:设计中可靠性,可维护性&可支持性(RM&S)的计算机化

This Aerospace Information Report (AIR) is the primary vehicle for providing the survey results to industry and government. The Institute of Defense Analysis (IDA), has performed a study which concludes that computerized techniques must be developed to integrate RM&S into product design in order to permit design influence from inception throughout the product life cycle. This AIR addresses the DoD initiative for developing Computer Aided Acquisition and Logistic Support (CALS) and industrys role in its evolution. AIR 4276 provides the detailed results of an industry/government survey inquiring into the extent of computerization of RM&S into the design process. Background information describes the evolution of the survey and why it was developed. The results provide demographic information about the respondents, the existence and extent of their CALS policy and plans, the priority placed on each RM&S task, and the extent to which these tasks have been computerized into the design process. Recommendations based on the survey results are included

Survey Results: Computerization of Reliability, Maintainability& Supportability (RM&S) in Design

HB 6250-1989 计算机软件分类与代码

本标准规定了航空直流起动电动机的技术要求、试验方法、检验规则、标志、包装、运输和贮存等内容。 　　本标准适用于航空直流起动机电动机（以下简称电动机）。不适用于航空起动发电机。

Classification and Code of Computer Software

AECMA PREN 2656-1989 航空航天系列.56000千帕焊接几何图形

This «Aerospace Series» pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned AECMA Commission following comment by the Member countries.

Aerospace Series Pipe Couplings up to 56000 kPa Fitting End, Welded, Geometrical Configuration Issue P 1

HB 6175-1988 机载电子计算机直流稳压电源通用技术条件

本标准规定了飞机上电子计算机的直流稳压电源（以下简称电源）通用技术要求。 　　本标准适用于机载电子计算机的直流稳压电源。对有特殊要求和试验条件的电源亦应参照使用。

General technical specification for airborne electronic computer DC regulated power supply

HB 6095-1986 计算机读航空文献目录数据交换格式

本标准适用于机读文献目录数据库的建立与交换。

Data exchange format for computer-readable aviation bibliography

HB 5857-1984 机载电子数字计算机专业技术条件

本标准适用于飞机用电子数字计算机。它是编制专用技术条件的依据。因特殊情况需超出本标准时，应在专用技术条件中另行规定。

Airborne Electronic Digital Computer Professional Technical Conditions

SAE AS1426/APX2-1982 标准空出系统规范附录II 20.0数据要求和程序

This specification (Part I) covers the performance, design, development and test requirements for the standard galley system. The galley equipment comprising the standard system includes standard containers, carts (trolleys), modules, ovens, refrigerators, coffee makers, water boilers, hot jugs, and related items; and several standard configurations and sizes of galley shell structures with internal arrangement options. Standard tray and entree dish envelopes are also defined, allowing variations for user styling and shape within related equipment space provisions.

STANDARD GALLEY SYSTEM SPECIFICATION APPENDIX II 20.0 DATA REQUIREMENTS AND PROCEDURES