V10 航空、航天材料基础标准 标准查询与下载

ARMY JAN-M-476 A REINST NOTICE 2-1996 锰粉(用于弹药)

MIL-P-45605A(AR), dated 2 August 1968 has been reviewed and detemiined to be valid for Lise in acquizition

MANGANESE, POWDERED (FOR USE IN AMMUNITION)

ARMY MIL-L-63470 REINST NOTICE 3-1996 氯化锂(用于弹药)

MIL-L-63470 dated 2 February 198 1, and Validation Not ice 1, dated 5 February 1987 is hereby reinstated and may be used for acquisition

LITHIUM CHLORIDE (FOR USE IN AMMUNITION)

ARMY MIL-A-50424 REINST NOTICE 3-1996 缩醛.压片机(用于弹药)

MIL-A-50424 dated 23 May 1969, and Amendment 1,dated 18 April 199 1 with Validation Notice 1, dated 1 1 July 1988 is hereby reinstated and may be used for acquisition.

ACETAL, SHEETING (FOR USE WITH AMMUNITION)

ASTM E471-96(2011) 用机械加工法和称重法获得烧蚀材料炭密度纵面图的标准试验方法

1.1 This test method covers the determination of the char density profile of a charred ablator that can be used with the following limitations: 1.1.1 The local surface imperfections must be removed, and the char must be able to be machined off in a plane parallel to the char-virgin material interface before the density profiles can be determined. 1.1.2 The char must be strong enough to withstand the machining and handling techniques employed. 1.1.3 The material should have orderly density variations. The total thickness of the char and degradation zone must be larger than the machining thicknesses required. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.2.1 Exception8212;Certain inch-pound equivalent units are included in parentheses for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing

ARMY MIL-M-10008 F REINST NOTICE 2-1996 M29A1型81MM迫击弹

MIL-M-10008F dated 24 September 1984 with Amendment 1, dated 13 January 1987 is hereby reinstated and may be used for acquisition.

MORTAR, 81MM, M29A1

ARMY MIL-W-48757 REINST NOTICE 2-1996 M251和M251A1型烈性炸药导弹弹头零件的备件

MIL-W-48757 dated 28 March 1975 with Amendment 5, dated 16 December 1988 is hereby reinstated and may be used for acquisition.

WARHEAD SECTION, GM, HE: M251 AND M251A1 SPARE PARTS FOR

ARMY MIL-W-48855 C REINST NOTICE 2-1996 M258型烈性炸药导弹弹头零件的整装弹头组装

MIL-W-48855C dated 17 May 1985 with Amendment 5, dated 25 June 1995 is hereby reinstated and may be used foar cquisition.

WARHEAD BODY ASSEMBLY FOR WARHEAD SECTION, GM, HE, M258

ARMY MIL-W-48381 REINST NOTICE 2-1996 M252E1型轻量级导弹弹头零件实施零件的装配

MIL-W-4838 1 dated 23 September 1974 with Amendment 3, dated 10 February 1975 is hereby

WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252E1 PARTS AND ASSEMBLING

ARMY MIL-C-48758 REINST NOTICE 3-1996 M764型90MM曳光教练弹的装卸.组装和安装

This notice should be filed in front of MIL-C-70495(AR), dated 04 April 1985

CARTRIDGE, 90MM, TP-T, M764 LOADING, ASSEMBLING AND PACKING

ARMY MIL-W-48230 (1)-1996 M229型2.75英寸弹头零件

This amendment forms a part of Military Specification MIL-W-48230(AR), dated 07 December 1973, and is approved for use by the US Army Armament Research, Development and Engineering Center and is available for use by all Departments and Agencies of the Department of Defense.

WARHEAD, 2.75 INCH ROCKET, M229 PARTS FOR

ARMY MIL-F-50950 C REINST NOTICE 2-1996 M223普通手榴弹引信

MIL-F-50950C dated 6 January 1993 is hereby reinstated and may be used for acquisition.

FUZE, GRENADE, GP: M223

ARMY MIL-W-48369 REINST NOTICE 2-1996 M252型轻量级导弹弹头零件实施零件的装配

MIL-W-48369 dated 2 August 1974 with Amendment 5, dated 24 March 1980 is hereby reinstated and may be used for acquisition.

WARHEAD SECTION, GM, PRACTICE, LIGHTWEIGHT, M252 PARTS AND ASSEMBLING

ARMY MIL-C-60678 B (3)-1996 M246型20MM高爆炸性易燃自毁炮弹

This specification is approved for use by the US Army Armament Research and Devlopment Command and is available for use by all Departments and Agencies of the Department of Defense. The complete requirements for procuring the circuit card assembly described herein shall consist of this document and the latest issue of specification MIL-C-63371(AR).

CARTRIDGE, 20MM, HIGH EXPLOSIVE, INCENDIARY TRACE-SELF DESTRUCT, M246

ARMY MIL-C-46939 REINST NOTICE 3-1996 M19型90MM炮弹筒

MIL-C-4693 9 dated 24 May 1963 and Validation Notice 1, dated 15 October 1990 is hereby reinstated and may be used for acquisition

CASE, CARTRIDGE, 90MM, M19

ARMY MIL-C-46932 A REINST NOTICE 3-1996 M160型7.62MM北约球状易碎炮弹

MIL-C-46933A dated 24 August 1966 with Amendment 3, dated 2 October 1984 and Validation Notice 1. dated 31 October 1990 is hereby reinstated and may be used for acquisition.

CARTRIDGE, 7.62MM, NATO, BALL, FRANGIBLE, M160

ARMY MIL-C-3120 F NOTICE 1-1995 M1和M2型155MMHC发烟霰弹

This commercial item description covers brown kraft paper used for general wrapping applications.

CANISTER, SMOKE, HC, 155MM PROJECTILE, M1 AND M2

ARMY MIL-G-51375 NOTICE 1-1995 M47.CS防暴动手榴弹

This commercial item description covers brown kraft paper used for general wrapping applications.

GRENADE, HAND, RIOT, CS, M47

ARMY MIL-C-51360 B NOTICE 1-1995 M1型105MM HC烟幕弹

This commercial item description covers brown kraft paper used for general wrapping applications.

CANISTER, SMOKE, HC, 105MM, PROJECTILE, M1

ARMY MIL-G-51374 NOTICE 1-1995 M4B.RS红烟手榴弹

This commercial item description covers brown kraft paper used for general wrapping applications.

GRENADE, HAND, RED SMOKE, RS, M4B

ARMY MIL-D-51188 C NOTICE 1-1995 直升机或车载 M5催泪弹分散机

This commercial item description covers brown kraft paper used for general wrapping applications.

DISPERSER, RIOT CONTROL AGENT, HELICOPTER OR VEHICLE MOUNTED, M5