共找到 2056 条与 航空与航天用非金属材料 相关的标准,共 138 页
Aerospace series - Rubbers - Marking and identification of the products.
Aerospace series - Molybdenum disulphide dry lubricants - Coating methods; German and English version EN 2491:2011
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
Zee - Equal Leg Extruded
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
Angle - Bulb Section Extruded
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
Angle - Unequal Leg Extruded
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
Zee - Unequal Leg Extruded
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
Angle - Equal Leg Extruded
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
I - Section - Extruded
Aerospace series - Burning behaviour of non metallic materials under the influence of radiating heat and flames - Determination of gas components in the smoke.
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers virgin, unfilled polytetrafluoroethylene (PTFE) in the form of sheet, manufactured by compression molding and sintering. This sheet has been used typically for parts requiring chemical resistance up to 500 °C (260 °C), with better mechanical properties and/or electrical properties than AMS 3667, but usage is not limited to such application.
Polytetrafluoroethylene (PTFE) Sheet, Molded, Premium Grade, As Sintered
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
Cloth, Marquisette, Nylon
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one type of nylon tape. Primarily for use as lacing tapes in the manufacture of flight clothing.
Tape, Woven, Nylon 350 Pounds Force (1557 N)
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a silicone (VMQ) rubber reinforced with glass cloth. This product has been used typically for gaskets or seals requiring a thin, resilient, nonporous sheet material suitable for operating from -55 to +205 degrees C (-67 to +401 degrees F), but usage is not limited to such applications. This material is resistant to deterioration by weathering and petroleum-base engine oil and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with gasoline or aromatic fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer.
Silicone (VMQ) Rubber Sheet, Glass Cloth Reinforced
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one weight of low-modulus aramid tape. Primarily for use in construction of parachutes. 2.0 inches (51 mm) wide low-modulus aramid tape having 1000 pounds force (4448 N) breaking strength.
Tape, Low Modulus Aramid, 2 (51), 1000 (4,448) Breaking Strength
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one weight of low-modulus aramid tape. Primarily in construction of parachutes. Low-modulus aramid tape having width of 2.0 inches (51 mm) and 300-pounds force (1334-N) breaking strength.
Tape, Low Modulus Aramid, 2 (51), 300 (1,334) Breaking Strength
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one type of nylon webbing. Primarily for use as webbing for oxygen mask adjustment straps.
Webbing, Woven, Nylon 900 Pounds Force (4003 N)
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification and its supplementary detail specifications cover various types of para-aramid fabric in the form of webbing. Primarily for use in the manufacture of parachutes and their accessories.
Webbing, Textile, Tubular, Para-Aramid Intermediate Modulus
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one weight of low-modulus aramid tape. Primarily for use in construction of parachutes. 2.0 inches (51 mm) wide low-modulus aramid tape having 3000 pounds force (13,345 N) breaking strength.
Tape, Low Modulus Aramid, 2 (51), 3000 (13,345) Breaking Strength
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one type of nylon webbing. Primarily for use in the manufacture of oxygen mask retention kits.
Webbing, Woven, Nylon 2600 Pounds Force (11,565 N)
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification and its supplementary detail specifications cover two types of nylon tape and three types of nylon webbing. Primarily for use in the manufacture of flight clothing. Tape and webbing shall be classified by breaking strength as shown in the applicable detail specifications.
Tape and Webbing, Woven, Nylon
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号