V13 航空与航天用非金属材料 标准查询与下载

SAE AMS3778/4B-2012 2600磅力(11,565 N)尼龙编织网

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers one type of nylon webbing. Primarily for use in the manufacture of oxygen mask retention kits.

Webbing, Woven, Nylon 2600 Pounds Force (11,565 N)

DIN 29597:2012 航空航天.液体涂层材料的应用

Aerospace - Application of liquid coating materials

BS EN 4195:2011 航空航天系列.涂料和清漆.铬酸铅测定的试验方法

Aerospace series. Paints and varnishes. Test method for determination of chromate leaching

BS EN 4171:2011 航空航天系列.涂料和清漆.磷酸指数测定的试验方法

Aerospace series. Paints and varnishes. Test method for determination of phosphoric acid index

BS EN 4159:2011 航空航天系列.涂料和清漆.对微生物生长抵御的测定

Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth

SAE AMS3378B-2012 通用室温耐硫化非燃料两部分硅酮密封剂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a two-component silicone rubber sealant and compatible primers. Primarily for sealing aircraft structures within a temperature range of -65 degrees to +450 degrees F (-54 degrees to +232 degrees C). The sealant is also compatible with AS1241 phosphate ester fire resistant hydraulic fluids.

Sealant, Silicone, Two-Part, General Purpose Room Temperature Vulcanizing Non-Fuel Resistant

SAE AMS3373/2B-2012 室温弯曲的、耐油和耐变质的、中粘度的、绝缘和密封的硅酮橡胶复合物

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers an elastomeric silicone insulating and sealing compound, supplied as a two-component system. The compound may be either an addition- or a condensation-cure type. Primarily for use as a resilient potting or encapsulant where medium viscosity, oil resistance, closed mold capability, and hydrolytic stability are desired.

Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure

SAE AMS3368B-2012 高温弯曲的、透明的、弹性硅氧烷树脂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a silicone resin in the form of a two-component liquid. Primarily for encapsulation and conformal coating applications where dielectric properties are important and an elevated temperature cure is desired.

Silicone Resin, Elastomeric, Transparent, Elevated Temperature Cure

SAE AMS3358C-2012 80-180泊(8-18Pa.s)粘度的一般用途双面弹性硅密封剂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a room-temperature-vulcanizing, elastomeric silicone compound. This compound has been used typically for potting and encapsulating electronic products for service from -50 to +260 degrees C (-58 to +500 degrees F) where resistance to reversion is not required, but usage is not limited to such application.

Silicone Potting Compound, Elastomeric, Two-Part General Purpose, 80 to 180 Poise (8 to 18 Pa˙s) Viscosity

SAE AMS3373/1B-2012 室温弯曲的、耐油和耐变质的、低粘度的、绝缘和密封的硅酮橡胶复合物

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers an elastomeric silicone insulating and sealing compound, supplied as a two-component system. The compound may be either an addition- or a condensation-cure type. Primarily for use as a resilient potting or encapsulant where low viscosity, oil resistance, closed mold capability, and hydrolytic stability are desired.

Compound, Silicone Rubber, Insulating and Sealing, Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure

SAE AMS3333B-2012 最高达250℉(121℃)时飞行器挡风玻璃和座舱盖用聚硫密封化合物

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers types and classes of polysulfide sealing compound supplied as a two-component system suitable for application by brush, or by extrusion gun, spatula brush, or roller. This product has been used typically for sealing aircraft windshields and canopies. This includes both sealing between the windshild/canopy and the aircraft structure for pressure sealing, and sealing around the windshield/canopy for weather sealing, but usage is not limited to such applications. The sealing compound cures at room temperature and may have an accelerated cure at higher temperatures. The sealing compounds are usable from -65 to 250 degrees F (-54 to 121 degrees C).

Sealing Compound, Polysulfide for Aircraft Windshields and Canopies, for Use up to 250°F (121°C)

SAE AMS3373C-2012 硅酮橡胶绝缘和密封化合物35-55

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers elastomeric silicone insulating and sealing compounds supplied as two-component systems which cure at room temperature. These products have been used typically for protecting the electrical integrity of electrical and electronic components by excluding moisture and contamination and by providing resilient cushioning between -50 and +205 degrees C (-58 and +401 degrees F), but usage is not limited to such applications. Compound may be applied by potting or encapsulating.

Compound, Silicone Rubber, Insulating and Sealing 35 to 55

SAE AMS3372B-2012 高温弯曲的、高撕扯强度的、弹性硅氧烷树脂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a silicone resin in the form of a two-component liquid. Primarily for encapsulation and conformal coating applications where dielectric properties are important and an elevated temperature cure is desired.

Silicone Resin, Elastomeric, High Tear Strength, Elevated Temperature Cure

SAE AMS3361C-2012 140-400泊(15-40a.s)粘度的一般用途双面弹性硅密封剂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a room-temperature-vulcanizing, elastomeric silicone compound in the form or a base compound and a catalyst. This compound has been used typically for potting and encapsulating electronic products for use at temperatures from -50 to +260 degrees C (-58 to +500 degrees F) where resistance to reversion is not required, but usage is not limited to such applications.

Silicone Potting Compound, Elastomeric, Two-Part, General Purpose, 140 to 400 Poise (15 to 40 Pa˙s) Viscosity

SAE AMS3370B-2012 室温弯曲的、透明的、弹性硅氧烷树脂

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a silicone resin in the form of a two-component liquid. Primarily for encapsulation and conformal coating applications, where dielectric properties are important and a room temperature cure is desired.

Silicone Resin, Elastomeric, Transparent, Room Temperature Cure

SAE AMS3634E-2012 热收缩半刚性有选择交联的电绝缘聚烯烃塑料管

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers an irradiated, thermally-stabilized, modified- polyolefin plastic in the form of dual-wall tubing. This tubing has been used typically as a semi-rigid, electrical insulation tubing whose diameter can be reduced to a predetermined size by heating to 135 degrees C (275 degrees F) or higher, but usage is not limited to such applications. Tubing is not flame-retardant and will burn slowly. This tubing is stable for continuous exposure from -55 to +110 degrees C (-67 to +230 degrees F).

Tubing, Plastic, Electrical Insulation, Polyolefin, Selectively Crosslinked, Semi-Rigid, Heat Shrinkable

SAE AMS3649D-2012 未增塑的聚氯三氟乙烯薄膜

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a 100% homopolymer of polychlorotrifluoroethylene (PCTFE) in the form of film and film tape 0.010 in. (0.25 mm) and under in nominal thickness. Primarily for parts requiring chemical inertness up to 200 degrees C (392 degrees F) and electrical insulating properties up to 165 degrees C (329 degrees F).

Film, Polychlorotrifluoroethylene (PCTFE) Unplasticized

SAE AMS3638G-2012 热收缩比为2:1的热收缩半刚性电气绝缘着色散热聚烯烃塑料管

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers an irradiated, thermally-stabilized, flame-retardant, modified polyolefin plastic in the form of thin-wall tubing. This tubing has been used typically as a semi-rigid, electrical insulation tubing whose diameter can be reduced to a predetermined size by heating to a temperature higher than 120 degrees C (248 degrees F), but usage is not limited to such applications.

Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat-Shrinkable, 2 to 1 Shrink Ratio

SAE AMS3648C-2012 未增塑的聚氯三氟乙烯管

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification covers a 100% homopolymer of polychlorotrifluoroethylene (PCTFE) in the form of thin wall tubing. Primarily for electrical and electronic applications requiring a chemically-inert tubing of the fluorocarbon family, having high dielectric strength and volume resistivity and being free from pinholes and electrical flaws, for use up to 165 degrees C (329 degrees F).

Tubing, Polychlorotrifluoroethylene (PCTFE) Unplasticized

SAE AMS3125H-2012 发动机灰底甘油酞酸酯瓷漆

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of June 2009. By this action, this document will remain listed in the Numerical Section of the Index of Aerospace Material Specifications indicating that it has been "CANCELLED". This specification covers a gloss, engine-gray baking enamel based on a glyceryl phthalate resin. Primarily as an exterior protective coating for metal surfaces.

Enamel, Glyceryl Phthalate, Engine Gray Baking