V15 复合材料与固体燃料 标准查询与下载

AECMA PREN 6033-1995 航空航天系列.纤维加固塑料试验方法层间断裂韧度能量模式I - Gic.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Carbon Fibre Reinforced Plastics Test Method Determination of Interlaminar Fracture Toughness Energy Mode I - GIc Edition P1

AECMA PREN 6032-1995 航空航天系列.纤维加固塑料试验方法玻璃转换温度.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Glass Transition Temperatures Edition P1

AECMA PREN 6030-1995 航空航天系列.纤维加固塑料试验方法由于化学油漆剥离器机械退化.P1版

This"Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Fibre Reinforced Plastics Test Method Determination of the Mechanical Degradation Due to Chemical Paint Strippers Edition P1

AECMA PREN 3665-1995 航空航天系列.油漆和清漆抗丝状锈蚀测试铝合金

This "Aerospace series" Standard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). It is published on yell0 w paper in three equivalent versions (English, French, German). It will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote.

Aerospace Series Test Methods for Paints and Varnishes Filiform Corrosion Resistance Test on Aluminium Alloys Edition 1

AECMA PREN 3096-1995 航空航天系列无钉时间密封剂 试验方法.P1版

This document gives a common overview about LOTAR – EN 9300. EN 9300 is split into different separate standard parts to make the standard applicable for different business requirements and extendable for further long term archiving formats. Structure and content of EN 9300 standard parts are detailed in this document.

Aerospace Series Sealants Test Method Determination of Tack-Free Time Edition P 1

AECMA PREN 3094-1995 航空航天系列作业时间密封试验方法.P1版

This standard defines the characteristics of tin plated copper ring shaped terminals for crimping on copper conductors. They are for use on both metric and inch dimension studs at temperatures up to 150 °C maximum. This standard should be used in conjunction with EN 3373-001.

Aerospace Series Sealants Test Method Determination of Application Time Edition P 1

NAVY MIL-A-3664 NOTICE 1-1995 奥黄, 盐酸盐(有色烟雾混合物)

The complete requirements for procuring the terminal described herein shall consist of this document and the latest issue of Specification MIL-T-24381 (SIIIPS)

AURAMINE HYDROCHLORIDE (FOR COLORED SMOKE MIXTURES)

QJ 2755-1995 多孔低密度复合材料压缩性能试验方法

Test method for compressive properties of porous low-density composites

NAVY DOD-D-23443 B (2)-1995 工业用己二酸二辛酯

This Amendment forms a part of DOD-D-23443B dated 15 May 1978, and is approved for use by all Departments and Agencies of the Department of Defense.

DI-(2-ETHYLHEXYL) ADIPATE, TECHNICAL (METRIC)

HB 6768-1993 碳纤维复合材料飞机蒙皮用抗静电聚氨酯磁漆

本标准规定了碳纤维复合材料飞机蒙皮抗静电丙烯酸聚酯磁漆的技术要求、试验方法、验收规则等项内容。 　　本标准适用于碳纤维复合材料飞机蒙皮表面抗静电用的防护磁漆。

Antistatic polyurethane enamel for carbon fiber composite aircraft skin

AECMA PREN 3840-1994 航空航天系列.油漆和清漆技术规范.P1版

This standard defines the technical requirements for the control of paints and varnishes. This procedure describes the general requirements for the qualification, batch acceptance and the delivery of paints and varnishes. The procedure is applicable to products intended for use in aerospace applications.

Aerospace Series Paints and Varnishes Technical Specification Edition P 1

AECMA PREN 2432-1994 航空航天系列.乙丙橡胶(EPM/EPDM) 硬度 90 IRHD.第1版

This ”Aerospace series” Standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial).

Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 90 IRHD Edition 1

AECMA PREN 2431-1994 航空航天系列.乙丙橡胶(EPM/EPDM) 硬度 80 IRHD.第1版

This "Aerospace series" Standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote.

Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 80 IRHD Edition 1

AECMA PREN 2428-1994 航空航天系列. 乙丙橡胶(EPM/EPDM) 硬度 50 IRHD.第1版

This industrial standard for the aerospace sector has been drawn up under the responsibility of AECMA.

Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 50 IRHD Edition 1

AECMA PREN 2430-1994 航空航天系列.乙丙橡胶(EPM/EPDM) 硬度 70 IRHD.第1版

This "Aerospace series" Standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on yellow paper in three equivalent versions (English, French, German). It will be submitted as a draft European Standard to CEN (European Committee for Standardization) for formal vote.

Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 70 IRHD Edition 1

AECMA PREN 2429-1994 航空航天系列.乙丙橡胶(EPM/EPDM) 硬度60 IRHD.第1版

This industrial Standard for the aerospace sector has been drawn up under the responsibilit of AECMA.

Aerospace Series Ethylene-Propylene Rubber (EPM/EPDM) Hardness 60 IRHD Edition 1

AECMA PREN 2435-01-1994 航空航天系列.油漆和清漆 耐腐蚀,双组分,冷固化底漆.第1部分:最低要求.第1版

This standard is initially published on green paper for the needs of AECMA-Members (Association Européenne des Constructeurs de Matériel Aérospatial). It has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Aerospace Series Paints and Varnishes Corrosion Resistant Chromated Two Component Cold Curing Primer Part 01 : Minimum Requirements Edition P 1

HB/Z 245-1993 飞机复合材料构件固化模设计与制造

本标准规定了飞机复合材料构件的固化模的设计与计算、制造工艺及技术要求。 　　本标准适用于复合材料构件的固化模的设计与制造。

Design and Manufacture of Curing Die for Aircraft Composite Components

NAVY MIL-P-21929 C (1)-1994 (2磅每立方英尺)硬的现场发泡的聚氨基甲酸酯塑料

This amendment forms a part of MIL-P-21929Cf 1d5a ted January 1991, and is approved for use by all Departments and Agencies of the Departmoef ntD efense.

PLASTIC MATERIAL, CELLULAR POLYURETHANE, FOAM-IN-PLACE, RIGID (2 POUNDS PER CUBIC FOOT)

ARMY MIL-STD-1171 A-1994 (火炸药)验收和说明书

This appendix contains one blank sample sheet each for the five acceptance and description sheets for propellants and explosives.part of the standard. intended for guidance only. This appendix is not a mandatory

ACCEPTANCE AND DESCRIPTION SHEETS (FOR PROPELLANTS AND EXPLOSIVES)