共找到 884 条与 复合材料与固体燃料 相关的标准,共 59 页
The General Services Administration has authorized the use of this Commercial Item Description.
BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 12 VOLT, 50 AMPERE-HOUR, TYPE 12V-S-50 AH
The General Services Administration has authorized the use of this Commercial Item Description.
BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 6 VOLT, 50 AMPERE-HOUR, TYPE 6V-S-50 AH
The General Services Administration has authorized the use of this Commercial Item Description.
BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 12 VOLT, 15 AMPERE-HOUR, TYPE 12V-S-15 AH
1.1 These definitions cover the flow properties of gelled propellants of interest to the aerospace industry.
Standard Terminology of Rheological Properties of Gelled Rocket Propellants
The General Services Administration has authorized the use of this Commercial Item Description.
BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 2 VOLT, 10 AMPERE-HOUR, TYPE 2V-S-10 AH
The General Services Administration has authorized the use of this Commercial Item Description.
BATTERY, STORAGE (PORTABLE, SEALED, MAINTENANCE-FREE, LEAD-ACID) 6 VOLT, 200 AMPERE-HOUR, TYPE 6V-S-200 AH
This standard specifies the characteristics for the turret used with the M22520/31 crimping tool to crimp electrical contacts according to EN 4008-002.
Aerospace Series Straight Pins, Spring Type, Light Duty, in Corrosion Resisting Spring Steel, Passivated Issue P 1
This specification covers a resin material and installation system which, after mixing and installation in a void, will form a rigid, foam-in-place type unicellular urethane foam.
PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF
This specification covers the requirements and quality acceptance provisions for coal-based waxes, Type I and Type II(see 6.1.1) for the manufacture of explosive compositions
WAXES, COAL-BASED, FOR USE IN R8150 EXPLOSIVE
This «Aerospace Series» pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Commission following comment by the Member countries.
Aerospace Series Sampling Plan for Acceptance Testing of Aramid, Carbon Fibre and Textile Glass Filament Yarns Edition P 1
This «Aerospace Series. preistandard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Commission following comment by the Member countries.
Aerospace Series Fibre Composite Materials Normalisation of Fibre Dominated Mechanical Properties Issue P 1
This specification covers dieks for uee in comparatore conforming to MIL-C-538.
DISKS, COLOUR STANDARDS
Thle specification covere one grade of electrolytic copper rod in the ooldil?rawn condition wed in the manufacture of crusher. cylinders or 'preesure 6e
DISPENSER, MINE: M138 (FLIPPER)
This detonation process for applying tungsten carbidecobalt coating provides a hard, wear-resistant surface on metal parts which do not operate at temperatures higher than 1,000 degrees Fahrenheit(OF) C538 degrees Celsius(5380C)l. The coating is not recommended for surfaces with deep v-shaped grooves, blind cavities, narrow holes, sharp corners, or where deformation of the base metal is expected.
TUNGSTEN CARBIDE-COBALT COATING, DETONATION PROCESS FOR
This notice should be filed in front of MIL-A-82484(OS), dated 13 June 1967,
ADHESIVE AND SEALING COMPOUNDS, CELLULOSE NITRATE BASE SOLVENT TYPE (FOR ORDNANCE USE)
MIL-STD-l607A(SH), dated 11 August 1987, has been reviewed and determined to be valid for use in acquisition.
CHEMICAL CLEANING OF MAIN AND AUXILIARY BOILERS (SULFAMIC-CITRIC ACID METHOD)
This amendment forms a part of Military Specification MIL-C-45113B(AR) dated 24 August 1983, and is approved for use by the US Army Armament, Munitions and Chemical Command and is available for use by all Departments and Agencies of the Department of Defense.
COMPOSITION B-3
WINCHES, DRUM, HAND-OPERATED, SAFETY TYPE, FOR PONTOON BARGES This specification is approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies. 1. SCOPE 1.1 Scope. This specification covers hand-operated winches for use on pontoon barges. 1.2 Classification. Winches shall be of the following types and sizes, as
WINCHES, DRUM, HAND-OPERATED, SAFETY TYPE, FOR PONTOON BARGES
The General Services Administration has authorized the use of this commercial item description as a replacement for MIL-I-62520(AT), which is canceled.
INSULATION, MOLDED, NOISE BARRIER
This amendment forms a part of MIL P 24249A(SH), dated 20 July 1922, and is approved for use by the Naval Sea Systems Command, Department of the Navy and is available for use by all Departments and Agencies of the Department of Defense.
PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号