V20 紧固件 标准查询与下载

SAE AS117001B THRU AS117040B-2012 螺钉.椭圆的圆筒形螺丝头.164-32

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Screw. Oval Fillister Head, .164-32

SAE AS9217C-2012 最小值为195 KSI的UNS K14675双六角扩展垫圈头镍镉扩散镀层带孔钢制机器螺栓.190-32 UNJF-3A

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Bolt, Machine - Steel, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 KSI MIN, .190-32 UNJF-3A

SAE AS116961C THRU AS117000C-2012 螺钉.椭圆的圆筒形带孔螺钉头.138-32

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Screw. Oval Fillister Drilled Head, .138-32

SAE AS9489C-2012 最小值为130 ksi的UNS S66286耐腐蚀和耐热钢全杆六角头机器螺栓.1900-32 UNJF-3A

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Bolt, Machine - Hexagon Head, Full, Shank, Corrosion and Heat Resistant Steel, UNS S66286, 130 ksi min, .1900-32 UNJF-3A

SAE AS9207C-2012 最小值为195 KSI的UNS K14675双六角扩展垫圈头镍镉扩散镀层钢制机器螺栓.1640-36 UNJF-3A

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Screw, Machine - Steel, Diffused Nickel - Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675 195 KSI MIN, .1640-36 UNJF-3A

SAE AS150426D THRU AS150450D-2012 根据AMS 6320,AMS 6322或AMS 6325检查六角螺母

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.

Nut-Hex, Check, AMS6320, AMS6322, or AMS 6325

SAE AS3332B-2011 管道连接平头铜垫圈

Gasket - Copper, Tube Connection, Plain

SAE AS3236C-2011 1900-32 UNJF-3A,最小为185 ksi的UNS N077185PD镍合金PD螺柱双六角头扩展垫圈头机器螺栓

Bolt, Machine-Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy UNS N077185, 185 ksi Min, .1900-32 UNJF-3A

SAE AS3240C-2011 最小为185 ksi,4375-20 UNJF-3A型 UNS N077185PD镍合金PD螺柱双六角头扩展垫圈头机器螺栓

Bolt, Machine-Double Hex Extended Washer Head, PD Shank, Nickel Alloy UNS N07718, 185 KSI MIN, .4375-20 UNJF-3A

SAE AS3239C-2011 最小为185 KSI,.3750-24 UNJF-3A型UNS N077185 镍合金PD螺柱双六角头扩展垫圈头机器螺栓

Bolt, Machine-Double Hexagon Extended Washer Head, PD Shank, Nickel Alloy UNS N07718, 185 ksi Min, .3750-24 UNJF-3A

SAE AS3238C-2011 .3125-24 UNJF-3A,最小为185 ksi的UNS N07718镍合金PD螺柱双六角头扩展垫圈头机器螺栓

Bolt, Machine-Double Hex Extended Washer Head, PD Shank, Nickel Alloy, UNS N07718, 185 ksi Min, .3125-24 UNJF-3A

KS W 2511-2011 航空器轮胎用橡胶管

이 표준은 항공기의 메인, 노스, 테일 및 비이칭 휠 케이스에 사용되는 타이어용 공기 주입

Rubber tubes for aircraft tires

SAE AS9219C-2011 最小为195 KSI,.3125-24 UNJF-3A型带有钻孔的UNS K14675镀有扩散镍镉的钢制双六角头扩展垫圈头机器螺栓

Bolt, Machine-Steel, Diffused Nickel-Cadmium Plate, Double Hexagon Extended Washer Head, Drilled, UNS K14675, 195 KSI Min, .3125-24 UNJF-3A

SAE AS7474C-2011 抗腐蚀钢制成的抗卡强度为140 ksi的螺母和螺钉的采购规范(UNS S17400)

This specification covers bolts and screws made from a corrosion and heat resistant, martensitic iron base alloy of the type identified under the Unified Numbering System as UNS S17400. The following specification designations and their properties are covered: AS7474 140 ksi minimum ultimate tensile strength at room temperature 100 ksi stress corrosion test 72 ksi to 7.2 ksi tension-tension fatigue; AS7474-1 140 ksi minimum ultimate tensile strength at room temperature 100 ksi stress corrosion test 88 ksi minimum ultimate shear strength at room temperature. Primarily for aerospace propulsion system applications where corrosion resistance and high strength in tension is required in temperatures not to exceed 600 °F.

Bolts and Screws, Steel Corrosion Resistant, UNS S17400 Tensile Strength 140 ksi Procurement Specification

SAE AS9705B-2011 用抗热和耐腐蚀钢制成的双重加工六角垫圈头伸长钻孔螺栓(.1900-32 UNJF-3A)

Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .1900-32 UNJF-3A

SAE AS3417A-2011 双重机械加工六角头伸长垫圈头,且带有紧公差并的螺母,UNS NO7718.1900-32 UNJF-3A(抗应力裂变)

Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS N07718, .1900-32 UNJF-3A (Stress Rupture Resistant)

SAE AS3418A-2011 双重机械加工六角头伸长垫圈头,且带有紧公差并的螺母,UNS NO7718.2500-28UNJF-3A(抗应力裂变)

Bolt, Machine, Double Hex, Ext Washer Head, Close Tolerance Shank, UNS N07718, .2500-28UNJF-3A (Stress Rupture Resistant)

SAE AS3420A-2011 双重机械加工六角头伸长垫圈头,且带有紧公差并的螺母,UNS NO7718.3750-24 UNJF-3A(抗应力裂变)

Bolt, Machine, Double Hex, Ext Washer Head, Close Tolerance Shank, UNS N07718 .3750-24 UNJF-3A (Stress Rupture Resistant)

SAE AS7477E-2011 拉伸强度为130 ksi的UNS S66286钢制螺栓和螺钉采购规范

This document covers bolts and screws made from a corrosion and heat resistant, precipitation hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286. The following specification designations and their properties are covered: AS7477: 130 ksi minimum ultimate tensile strength at room temperature 70 ksi stress-rupture strength at 1200 °F; and AS7477-1: Inactive for Design; AS7477-2: 130 ksi minimum ultimate tensile strength at room temperature 78 ksi minimum ultimate shear strength at room temperature. Classification: 130 ksi minimum tensile strength at room temperature 1200 °F maximum test temperature of parts. Primarily for aerospace propulsion system applications where a good combination of fatigue resistance, tensile strength, shear strength, and resistance to relaxation at elevated temperatures is required.

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification

SAE AS7473B-2011 滚有螺纹的螺母和螺钉的采购规范

This procurement specification covers bolts and screws made from carbon steels, high expansion steels, or corrosion and heat resistant steels of the type identified under the Unified Numbering System as follows: a. UNS K00802 carbon steel (AMS 5061); b. UNS K91505 high expansion steel (AMS 5624); c. UNS K91456 high expansion steel (AMS 5625); d. UNS S32100 corrosion and heat resistant steel (AMS 5645); and e. UNS S34700 - corrosion and heat resistant steel (AMS 5646).

Bolts and Screws, Roll Threaded Procurement Specification for