共找到 6455 条与 紧固件 相关的标准,共 431 页
Bolt, Machine - Double Hexagon, Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 KSI MIN, .1900-32 UNJF-3A
Bolt, Machine-Hexagon Head, PD Shank UNS N07718, .3750-24 UNJF-3A (Stress Rupture Resistant)
The standard specifies tightening tests for the determining the coefficients of friction in the thread of bolt/nut assemblies under specified conditions. It is only applicable for comparison purposes, such as a comparision of assemblies with different surface finishes or for cases where different lubricants are used.
Aerospace - Determination of coefficient of friction of bolt/nut assemblies under specified conditions; Text in German and English
This standard specifies the characteristics of nuts, hexagon with MJ thread, self-locking, corrosion-resisting steel used together with screws, only subjected to shear loads and bolts of ≤1 100 MPa nominal tensile strength for temperatures up to 120 ℃ and not subjected to tensile loads for aeropace applications.
Aerospace series - Nuts, hexagon, with MJ-thread, self-locking, corrosion-resisting steel, classification: 1 100 MPa/120 °C; Text in German and English
Aerospace - Studs with MJ thread, captive ring lock, steel, nominal tensile strength 1 100 MPa, for temperature up to 235 °C
This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Number System as UNS S66286. The following specification designations and their properties are covered: MA3375 900 MPa minimum ultimate tensile strength at room temperature; MA3375-1 900 MPa minimum ultimate tensile strength at room temperature, 480 MPa stress-rupture strength at 650 degrees C; MA3375-2 900 MPa minimum ultimate tensile strength at room temperature, 590 MPa minimum ultimate shear strength at room temperature. Two types of studs are covered as follows: Type I - studs with stud end thread having special oversize pitch diameter and lead thread with undersize pitch diameter, while nut end thread is standard size; and Type II - studs with stud end thread and nut end thread standard size.
Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric
Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .3125-24 UNJF-3A (Stress Rupture Resistant)
Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification : 1 100MPa / 650 oC
Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286 130 KSI MIN, .2500-28 UNJF-3A
本部分规定了螺纹规格为M4~M8、螺母体材料为合金钢的尼龙密封单耳托板自锁螺母(以下简称"螺母")的尺寸和要求。 本部分适用于螺母的制造和验收。
All metal self-locking nuts.Part 21:Anchor fixed nilon seal single lug nuts
本部分规定了螺纹规格为M4~M8、螺母体材料为合金钢的橡胶密封单耳托板自锁螺母(以下简称"螺母")的尺寸和要求。 本部分适用于螺母的制造和验收。
All metal self-locking nuts.Part 20:Anchor fixed rubber seal single lug nuts
本部分规定了螺纹规格为M3~M6、螺母体材料为合金钢的B型游动单耳托板自锁螺母(以下简称"螺母")的尺寸和要求。 本部分适用于螺母的制造和验收。
All metal self-locking nuts.Part 18:Anchor fixed floating single lug nuts(type B)
本部分规定了螺紋规格为M4~M8、螺母体材料为合金钢的橡胶密封双耳托板自锁螺母(以下简称"螺母")的尺寸和要求。 本部分适用于螺母的制造和验收。
All metal self-locking nuts.Part 22:Anchor fixed rubber seal two lug nuts
本部分规定了螺纹规格为M3~M6、螺母体材料为不锈钢的游动单耳托板自锁螺母(以下简称"螺母")的尺寸和要求。 本部分适用于螺母的制造和验收。
All metal self-locking nuts.Part 19:Stainless steel anchor fixed floating single lug nuts
本部分规定了螺紋规格为M3~M6、材料为不锈钢的游动双耳托板自锁螺母(以下简称"螺母")的尺寸和要求。 本部分适用于螺母的制造和验收。
All metal self-locking nuts.Part 16:Stainless steel anchor fixed floating two lug nuts
本部分规定了螺纹规格为M3~M8、螺母体材料为合金钢的A型游动单耳托板自锁螺母(以下简称"螺母")的尺寸和要求。 本部分适用于螺母的制造和验收。
All metal self-locking nuts.Part 17:Anchor fixed floating single lug nuts(type A)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号