V21 管件、卡箍、密封件 标准查询与下载

BS EN 4530-001:2006 航空航天系列.连接部件用密封套.技术规范

This standard specifies:  the electrical, mechanical, environmental and dimensional characteristics of sealing sleeves used in elements of connection;  the conditions for qualification if the sealing sleeves are not tested during the connector qualification, acceptance testing and quality assurance;  the test programme and groups. It is applicable to removable sealing sleeves used in connectors or in other elements of electrical connection.

Aerospace series - Sealing sleeves used in elements of connection - Technical specification

BS EN 4529-002:2006 航空航天系列.电气和光学连接元件.密封塞.产品标准索引

This standard lists the product standards for sealing plugs for elements of electrical and optical connection covered by technical specification EN 4529-001.

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Index of product standards

NF L53-150-002:2006 航空航天系列.电光连接器元件.密封插件.第002部分:产品标准索引

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002 : index of product standards.

DIN EN 4187:2006 航空航天系列.8°30'钛合金管接头.90°闷头长弯管

This standard specifies the characteristics of elbows 90? bulkhead, long, for pipe couplings 8?0', in titanium alloy, for aerospace applications. Nominal pressure: up to 28000 kPa Temperature range: 55 ?to 135 ?,#

Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 90° bulkhead, long; German and English version EN 4187:2001

DIN EN 4188:2006 航空航天系列.钛合金管连接件8°30'.90°弯头长闷头焊接端头

Aerospace series - Pipe coupling 8°30′ in titanium alloy - Elbows 90° bulkhead, long, welded end; German and English version EN 4188:2001

DIN EN 3273:2006 航空航天系列.钛合金管连接件8°30'.弯头、十字管和三通管用动梁密封端头.几何配置

This standard specifies the dimensions of the dynamic beam seal end for elbows, tees and crosses for pipe couplings 8?0', nominal pressure up to 28000 kPa, for aerospace applications.#,,#

Aerospace series - Pipe coupling 8°30′ - Dynamic beam seal end for elbows, tees and crosses - Geometric configuration; German and English version EN 3273:2001

BS EN 3080:2006 航空航天系列.钛合金8°30'管连接件.带止推金属丝螺母的异径三通管

This standard specifies the characteristics of tees, reduced, branch with thrust wire nut, for pipe couplings 8°30', in titanium alloy, for aerospace applications. Nominal pressure: up to 28 000 kPa. Temperature range: − 55 °C to 135 °C.

Aerospace series - Pipe coupling 8 °30' in titanium alloy - Tees, reduced, branch with thrust wire nut

BS EN 4529-003:2006 航空航天系列.电气及光学连接元件.密封塞.T级产品标准

This standard specifies the required characteristics of sealing plugs, class T, for use in elements of electrical and optical connection containing cable (wire) sealing grommets, according to EN 4529-002. It shall be used together with EN 4529-001.

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Class T. Product standard

BS EN 4530-002:2006 航空航天系列.连接元件用密封套.密封套的列表和使用

This standard provides a list of removable sealing sleeves as defined in the product standards for use in connectors or other electrical elements of connection.

Aerospace series - Sealing sleeves used in elements of connection - List and utilization of sealing sleeves

BS EN 4529-001:2006 航空航天系列.电气及光学连接元件.密封塞子.技术规范

This standard specifies: - the electrical, mechanical, environmental and dimensional characteristics of sealing plugs used in elements of electrical and optical connection; - the conditions for qualification, acceptance testing and quality assurance; - the test programmes and groups.

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Technical specification

BS EN 3079:2006 8°30'压力＜28000kPa的导管接头.适配器.米制系列.技术规范

This standard specifies the required characteristics, inspection and test methods, quality assurance and procurement requirements for metric series 8°30' adaptors, for temperature ranges type II and III according to ISO 6771 and nominal pressure up to 28 000 kPa.

Pipe coupling 8 °30' up to 28000 kPa - Adaptors - Metric series - Technical specification

SAE AS85421/15B-2006 轴形、45度、横杆密封、3000/4000 psi、闷头、凸端配件

Fitting, Elbow, 45°, Beam Seal, 3000/4000 psi, Bulkhead, Male Ends

SAE AS1712C-2006 柔性的、变化空腔、螺纹箍型管末端、耦合组件

(R) COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS FSC 4730

(R) COUPLING SUBASSEMBLY, FLEXIBLE, VARIABLE CAVITY, THREADED, FERRULE TYPE TUBE ENDS FSC 4730

SAE AS5957B-2006 90度对90度钛配件非扩口的275°F、5080 psi对芳族聚酰胺增强的聚四氟乙烯软管组件

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 90?TO 90°FSC 4720.Figure is about flareless hose assembly Y, 90° to 90° elbow, fitting orientation/17/ and polyester abrasion sleeve duff/20/. Table is about hose and fitting dimensions, HOSE OR SLEEVE OUTSIDE DIAMETERS /10/ (DIAMETERS ARE MAXIMUM UNLESS OTHERWISE SPECIFIED), - HOSE ASSEMBLY LENGTH TOLERANCES, WEIGHTS /19/ and CUFF LENGTH.

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 90?TO 90°FSC 4720

SAE AS5955B-2006 45度对45度钛配件非扩口的275°F、5080 psi对芳族聚酰胺增强的聚四氟乙烯软管组件

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45?TO 45°FSC 4720.Table is about HOSE AND FITTING DIMENSIONS, HOSE OR SLEEVE OUTSIDE DIAMETERS /10/, HOSE ASSEMBLY LENGTH TOLERANCES, WEIGHTS /19/ and CUFF LENGTH.

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45?TO 45°FSC 4720

SAE AS5952B-2006 直线对直线钛配件非扩口的275°F、5080 psi对芳族聚酰胺增强的聚四氟乙烯软管组件

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT FSC 4720.Table is about HOSE AND FITTING DIMENSIONS, HOSE OR SLEEVE OUTSIDE DIAMETERS /10/, HOSE ASSEMBLY LENGTH TOLERANCES, WEIGHTS /19/, CUFF LENGTH.

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT FSC 4720

AECMA PREN 6090-2006 航空航天系列.垫圈.P1版

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

Aerospace series Washer, retaining Edition P 1

SAE AS1368B-2006 异径接头配件.密封圈式外螺纹扩口管件

FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING FSC 4730

FITTING, REDUCER-EXTERNAL THREAD FLARED TUBE FOR SEAL RING FSC 4730

SAE AS18280/2A-2006 套管、内或外冲模或焊接、24度锥形非扩口配件、3000 psi

This SAE Aerospace Standard (AS) establishes the requirements for internally or externally swaged or welded sleeves or tube end adapters for use with 24?cone flareless fluid connection fittings per AS18280.

(R) Sleeves, Internally or Externally Swaged or Welded, 24 Degrees Cone Flareless Fitting, 3000 psi

SAE AMS4942E-2006 40,000psi(275MPa)屈服强度的无缝退火钛管

This specification covers one grade of commercially-pure titanium in the form of seamless tubing. This tubing has been used typically for parts, such as fluid-conducting lines, requiring strength up to 400 °F (205 °C) and oxidation resistance up to 600 °F (315 °C), but usage is not limited to such applications.

Titanium Tubing, Seamless Annealed, 40,000 psi (275 MPa) Yield Strength