V21 管件、卡箍、密封件 标准查询与下载

SAE AS5195C-2005 管道用90度扩口弯头接头

FITTING, ELBOW, 90 DEGREES, FLARED TO PIPE FSC 4730TABLE 1 – DIMENSIONSTABLE 1A – DIMENSIONS AND WEIGHTSTABLE 1B – DIMENSIONSTABLE 1C – DIMENSIONS AND WEIGHTS

FITTING, ELBOW, 90 DEGREES, FLARED TO PIPE FSC 4730

DLA MS21122 REV D-2005 聚四氟乙烯楔形缓冲扎紧线箍

Remove all tool and die marks, burrs and sharp edges.

CLAMP, LOOP, CUSHIONED, WEDGE, POLYTETRAFLUOROETHYLENE

SAE AS5861-2005 液压汽动力聚四氟乙烯树脂固体静态气封的固定板（支撑环）

This SAE Aerospace Standard (AS) covers solid polytetrafluoroethylene (PTFE) retainers (back-up rings) for use in static glands in accordance with AS5857. They are for use in hydraulic and pneumatic system components as anti-extrusion devices in conjunction with O-rings, packings and other elastomeric seals. Because of the construction of groove dimensions, back-ups specific to rod applications are designated R - Rod (Female), back-ups specific to piston applications are designated P - Piston (Male). Retainers specified herein have been designed for a temperature range of -65 to 275 F (-54 to 135 C) and a nominal operating pressure of 3000 psi (20.6 MPa) for code 09 material and 5000 psi (34.3 MPa) for code 10 material. Material codes are based on AMS 3678 material types.

Retainers, (Back-Up Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Static Gland FSC 5330

SAE AS5963-2004 直对90度弯头的非扩口的400鳩, 5080 psi聚四氟乙烯CRES编织物增强的软管组件

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO 90 DEGREES ELBOW FSC 4720TABLE 1 - HOSE ASSEMBLY DIMENSIONSTABLE 1 - HOSE ASSEMBLY DIMENSIONS (CONTINUED)TABLE 2 - HOSE AND SLEEVE OUTSIDE DIAMETER /10/TABLE 3 - HOSE ASSEMBLY LENGTH TOLERANCETABLE 4 - WEIGHT (MAX)TABLE 5 - INTEGRAL FIRESLEEVE CUFF DIMENSIONS /13/

Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, Straight to 90° Elbow

SAE AS5962-2004 直对45度弯头的非扩口的400鳩, 5080 psi聚四氟乙烯CRES编织物增强的软管组件

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO 45 DEGREES ELBOW FSC 4720TABLE 1 - HOSE ASSEMBLY DIMENSIONSTABLE 1 - HOSE ASSEMBLY DIMENSIONS (CONTINUED)TABLE 2 - HOSE AND SLEEV E OUTSIDE DIAMETER /10/TABLE 3 - HOSE ASSEMBLY LENGTH TOLERANCETABLE 4 - WEIGHT (MAX)

Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, Straight to 45° Elbow

SAE AS5961-2004 直对直非扩口的400鳩, 5080 psi聚四氟乙烯CRES编织物增强的软管组件

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, STRAIGHT TO STRAIGHT FSC 4720.TABLE 1 - HOSE ASSEMBLY DIMENSIONSTABLE 2 - HOSE AND SLEEVE OUTSIDE DIAMETER /10/TABLE 3 - HOSE ASSEMBLY LENGTH TOLERANCETABLE 4 - WEIGHT (MAX)TABLE 5 - INTEGRAL FIRESLEEVE CUFF DIMENSIONS /13/

Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, Straight to Straight

SAE AS5965-2004 45度对90度弯头的非扩口的400鳩, 5080 psi聚四氟乙烯CRES编织物增强的软管组件

HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 DEGREES F, 5080 PSI FLARELESS, 45 DEGREE ELBOW TO 90 DEGREE ELBOW FSC 4720TABLE 1 - HOSE ASSEMBLY DIMENSIONSTABLE 1 - HOSE ASSEMBLY DIMENSIONS (CONTINUED)TABLE 2 - HOSE AND SLEEVE OUTSIDE DIAMETER /10/TABLE 3 - HOSE ASSEMBLY LENGTH TOLERANCETABLE 4 - WEIGHT (MAX)TABLE 5 - INTEGRAL FIRESLEEVE CUFF DIMENSIONS /13/

Hose Assembly, Polytetrafluoroethylene CRES Braid Reinforced, 400°F, 5080 psi Flareless, 45° Elbow to 90° Elbow

BS EN 4054:2004 航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳.技术规范

This standard specifies the characteristics, qualification and acceptance requirements for seals for flanged pipe couplings in fluorocarbon rubber with an armature in aluminium alloy, for aerospace applications. It is applicable whenever referenced.

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy - Technical specification

BS EN 3869:2004 航空航天系列.管连接件、松套法兰和密封件.碳氟化合物橡胶密封件和铝合金保护壳

This standard specifies the characteristics of seals for pipe couplings in fluorocarbon rubber and armature in aluminium alloy, for aerospace applications. NOTE Assembly in accordance with TR 4053

Aerospace series - Pipe couplings, loose flanges and seals - Seals in fluorocarbon rubber and armature in aluminium alloy

HB 7648-2004 空气导管连接快卸卡箍通用规范

本标准规定了高温空气导管快卸卡箍（以下简称卡箍）的使用条件、技术要求、试验方法、检验规则、标志、包装和贮存等要求。 　　本标准适用于空气系统导管连接快卸卡箍的制造、试验和验收。

Specification for Clamp connecting conduit in air system

HB 7647-2004 固定导管的环形卡箍通用规范

本标准规定了固定导管环形卡箍（以下简称卡箍）的使用条件、技术要求、试验方法、检验规则、标志、包装和贮存等要求。 　　本标准适用于卡箍的设计、制造、试验和验收。

Specification for clamp loop fixed tube

AECMA PREN 3545-002-2004 航空航天系列. 尾部密封和无密封塑料护套、锁紧装置、工作温度操作温度-55°C至175°C的矩形电接点.第002部分;技术规范和触点组合

It is essential that products defined by European aerospace series standards (EN) conform with the requirements of these standards, and that the quality of the products be consistently maintained. To this effect, a qualification system, AECMA-CERT, for manufacturer and product is implemented

Aerospace series Connectors, electrical rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures -55 Degrees Celsius to 175 Degrees Celsius Part 002: Specification of performance and contact arrangements Editi

DIN EN 3689:2004 航空航天系列.焊接管用钛合金制成的T环形填充物.28000kPa标称压力

This document specifies the characteristics of a t-ring filler that is used when welding two titanium alloy pipes together. The T-ring is manufactured from titanium alloy and is intended for use in aircraft fluid system pipelines. The nominal pressure is up to 28000 kPA (according to EN 2656).

Aerospace series - T-ring fillers in titanium alloy for welding pipes - 28000 kPa nominal pressure; German and English version EN 3689:2001 + AC:2003

DIN EN 3690:2004 航空航天系列.钛合金管连接件8°30'.长闷头活接头

This document specifies the characteristics of bulkhead unions in titanium alloy with a thread end for a maximum bulkhead wall thickness of 6 mm intended for use in aircraft fluid system pipelines.

Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long; German and English version EN 3690:2001 + AC:2003

DIN EN 3691:2004 航空航天系列.钛合金管连接件8°30'.焊接端长闷头活接头

This document specifies the characteristics of bulkhead unions in titanium alloy with a thread end for a maximum bulkhead wall thickness of 6 mm intended for use in aircraft fluid system pipelines.

Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, bulkhead, long, welded end; German and English version EN 3691:2001 + AC:2003

DIN EN 3561:2004 航空航天系列.钛合金管连接件8°30'.在管端焊接和轧制的带动梁密封端头的箍

Aerospace series - Pipe coupling 8°30 in titanium alloy - Ferrules with dynamic beam seal end, welded and reduced at pipe end; German and English version EN 3561:2001 + AC:2003

DIN EN 3084:2004 航空航天系列.钛合金管连接件8°30'.修理用焊接端头螺纹活接头

This standard specifies the characteristics of welded long unions of the 8?0' pipe coupling system in titanium alloy for aerospace application. They shall be used as repair couplings to replace EN 4233. Nominal pressure: up to 28000 kPa. Temperature range: - 55?to 135?

Aerospace series - Pipe coupling 8°30 in titanium alloy - Unions, welded end threaded for repair; German and English version EN 3084:2001 + AC:2003

DIN EN 3788:2004 航空航天系列.管连接件8°30'.防护管帽

Aerospace series - Pipe coupling 8°30 - Protective caps; German and English version EN 3788:2001 + AC:2003

DIN EN 3789:2004 航空航天系列.管连接件8°30'.带外螺纹的防护管塞

This document specifies the characteristics of plastic plugs used to protect metric 80?0 pipe fittings during transportation, storage and removal of units in system. The plugs incorporate an external thread for screwing on to the threaded portion of a pipe coupling.#,,#

Aerospace series - Pipe coupling 8°30 - Protective plugs with external threads; German and English version EN 3789:2001 + AC:2003

DIN EN 3790:2004 航空航天系列.管连接件8°30'.带内螺纹的防护管帽

Aerospace series - Pipe coupling 8°30 - Protective caps with internal threads; German and English version EN 3790:2001 + AC:2003