V22 机械配件、构件 标准查询与下载

BS EN 4198:2006 航空航天系列.带耐腐蚀钢制自润滑衬垫和螺纹轴的杆端可调节自动校准普通轴承.尺寸和荷载

This standard specifies the characteristics of adjustable rod-ends consisting of: - a self-aligning ball bearing with self-lubricating liner, EN 2501, - a rod-end with threaded shank consisting of: - a circumferential groove to identity location, - an optional longitudinal groove for locking purposes. These rod-ends are intended for use with flying control rods or rods for aerospace structures. They shall be used within the temperature range from: − 55 °C to 163 °C.

Aerospace series - Rod-ends, adjustable self-aligning plain bearing with self-lubricating liner and threaded shank in corrosion resisting steel - Dimensions and loads

BS EN 4041:2006 航空航天系列.机身滚动轴承.带扩展内圈和法兰自排轴套的耐腐蚀钢制硬质单列球轴承.尺寸和荷载

This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel with an extended inner ring and a solid or lightweight flanged alignment bush, designed to withstand only slow rotations and slight oscillations under load. They are intended for use in airframe fixed and moving elements and in flight control linkages. The bearings defined in this standard shall be used in the temperature range from – 54 °C to 150 °C. However, as they are lubricated with the following greases (see EN 3727): - ester type very high pressure grease (code letter A), operating range from – 73 °C to 121 °C or, - synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from – 54 °C to 177 °C. Their field of application when lubricated with code letter A grease is limited to 121 °C.

Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush - Dimensions and loads

BS EN 4424:2006 航空航天系列.钛合金接合螺纹直径1.5倍的螺纹杆和单叉的可调节杆端部.尺寸和负荷

This standard specifies the characteristics of rod-ends for flight control rods. - a single fork; - a threaded shank comprising; - a circumferential groove to identify engagement; - an optional longitudinal groove for locking purpose. These rod-ends are intended for use with control rods or rods for aircraft structures.

Aerospace series - Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys - Dimensions and loads

BS EN 3427:2006 航空航天系列.径向安装固定环的沟槽尺寸

This standard defines the definitions of groove for radial mounting retaining rings.

Aerospace series - Groove dimensions for radial mounting retaining rings

BS EN 3727:2006 航空航天系列.带法兰定位罩的机架用刚性滚动轴承.技术规范

This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for airframe bearings with flanged alignment housing. This standard applies whenever referenced.

Aerospace series - Bearings, airframe rolling rigid with flanged alignment housing - Technical specification

BS EN 2337:2006 航空航天系列.球面关节轴承.技术规范

This standard specifies the required characteristics, inspection and test methods, qualification and acceptance conditions for spherical plain bearings designed to withstand static loads and loads with slight swivelling. It is applicable whenever referenced.

Spherical plain bearings - Technical specification

DLA A-A-59422 VALID NOTICE 1-2006 机械驱动金属冲剪,开槽和仿形机

A-A-59422, dated 19 June 2000, has been reviewed and determined to be valid for use in acquisition.

PUNCHING, SHEARING, NOTCHING AND COPING MACHINE, METAL, MECHANICAL DRIVE

SAE AS5864-2006 闷头、24度锥形非扩口、液体连接、配件端的设计标准

This design standard is created to provide interface geometry for 3000 PSI flareless hydraulic fittings

FITTING END, BULKHEAD, 24?CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD FSC 4730

SAE AS5863-2006 24度锥形非扩口、液体连接、配件端的设计标准

This design standard is created to provide interface geometry for 3000 PSI flareless hydraulic fittings (SC)

FITTING END, 24?CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD FSC 4730

NF L06-831:2006 航空航天系列.金属零件.表面承压.钢丸、玻璃珠和瓷珠

Aerospace series - Metallic parts - Inducement compressive surface stresses - Steel shot, glass beads and ceramic beads.

SAE AS5793-2006 液动外螺纹直非扩口轴向陷型45度装配组件

This standard was prepared to provide envelope requirements for axially swaged, field attachable, tube fittings.

FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC FSC 4730

SAE AS81936A-2006 自调位滑动轴承的总规范(CRES轴承圈,Cu-Be滚珠)

This specification covers airframe plain spherical bearings utilizing a beryllium-copper ball and corrosion resistant steel outer race for use between -65°F and +350°F.

(R) Bearings, Plain, Self-Aligning (Cu-Be Ball, CRES Race) General Specification For

SAE AS5929-2006 履带支重轮、冠状辐射式外径、整体柱头螺栓、VII型抗摩擦、耐腐蚀氮(CREN)钢和耐腐蚀(CRES)钢滚针轴承

BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED O.D., INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH FSC 3110.Table1 is about CROWN RADIUS REF, THREAD SIZE UNJF-3A, B1 THREAD LENGTH REF. Table2 is about ALLOWABLE DEVIATION FROM ∅d OF SINGLE MEAN DIAMETER dmp and ALLOWABLE DEVIATION FROM COTTER PIN DIAMTER d1. Table3 is about LOAD RATING AS A TRACK ROLLER POUNDS and LIMIT LOAD RATING POUNDS. Table4 is about SCREWDRIVER SLOT and INSTALLATION TORQUE IN-LB MAXIMUM 2/.

BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED O.D., INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH FSC 3110

BS EN 4035:2006 航空航天系列.减小内部径向间隙和带螺纹钛合金杆耐腐蚀钢可调自动对心双列球轴承的杆端.尺寸和载荷

This standard specifies the characteristics of adjustable rod ends with self-aligning double row ball bearing in corrosion resisting steel with reduced internal radial clearance and threaded shank in titanium alloy, designed to withstand only slow rotations and oscillations under load. They consist of: - a rod end comprising: - circumferential groove to identify location; - either seals or shields; - an optional longitudinal groove for locking purpose; - an inner ring with balls. These rod ends are intended for use with flight control rods or rods for aerospace structures. They are intended to be used in the temperature range: − 54 °C to 150 °C. However, being lubricated with the following greases: - very high pressure grease, ester type (code A), operational range − 73 °C to 121 °C or - very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range − 54 °C to 177 °C (see EN 2067), their field of application when lubricated with code A grease is limited to 121 °C.

Rod ends, adjustable with self-aligning double row ball bearing in corrosion resisting steel, reduced internal radial clearance and threaded shank in titanium alloy - Dimensions and loads

BS EN 4040:2006 航空航天.宽内环的带自润滑内衬的耐蚀钢制关节轴承.室温高负荷.尺寸和负荷

This standard specifies the characteristics of spherical plain bearings in corrosion resisting steel with selflubricating liner, with wide inner ring, for elevated loads at ambient temperature. They are intended for use between fixed or moving parts of the aircraft structure and their control mechanisms. The spherical plain bearings defined in this standard are used from − 55 °C to 163 °C.

Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner ring - Elevated loads at ambient temperature - Dimensions and loads

DLA DSCC-DWG-93027 REV C-2006 无铅表面安装到电器

This drawing describes the requirements for a surface mount inductor.

INDUCTOR, SURFACE MOUNT, LEADLESS

NF L31-521*NF EN 2335:2006 航空航天.耐蚀钢制不带组装导槽的关节轴承.尺寸和负荷

Aerospace series - Bearings, spherical plain in corrosion resisting steel without assembly slot - Dimensions and loads.

SAE AS81936/1A-2006 CRES轴承圈、CU滚珠、自调、滑动轴承-65到+350华氏度（凹槽轴承圈）

BEARING, PLAIN, SELF-ALIGNING, CU-BE BALL, CRES RACE, (WITH GROOVED RACE) -65 °F TO +350 °F FSC 3120;TABLE 1 - DIMENSIONS;TABLE 2 - STRENGTHS;TABLE 3 - OVERSIZE BEARING DIMENSIONS;

BEARING, PLAIN, SELF-ALIGNING, CU-BE BALL, CRES RACE, (WITH GROOVED RACE) -65 °F TO +350 °F FSC 3120

ARMY MIL-PRF-3627 G-2006 土壤硬度计:指针指示和弹簧指示

This specification covers penetrometers used to determine the penetration resistance and degree of compaction of soils.

PENETROMETERS, SOIL: DIAL INDICATING AND SPRING INDICATING

DIN EN 12312-15:2006 飞行器地面支持设备.特殊要求.第15部分:行李和设备牵引车

This European Standard specifies the technical requirements to minimise the hazards which can arise during the commissioning, operation and maintenance of baggage and equipment tractors, when used as intended under the conditions of misuse which are reasonably forseeable by the manufacturer or his autorised representative. It also takes into account some performance requirements recognised as essential by authorities, aircraft and ground support equipment (GSE) manufacturers as well as airlines and handling agencies. This European standard applies to self-propelled baggage and equipment tractors with driver accommodation.#,,#

Aircraft ground support equipment - Specific requirements - Part 15: Baggage and equipment tractors; German version EN 12312-15:2006