V22 机械配件、构件 标准查询与下载

SAE AS27646B-2002 (R)超轻负荷抗摩擦机架用滚珠轴承

(R) Bearing, Ball, Airframe, Anti-Friction, Extra Light DutyTABLE 1- DIMENSIONS AND LOADS

(R) Bearing, Ball, Airframe, Anti-Friction, Extra Light Duty

SAE ARP5448/4-2002 滑动轴承粘合剂的完整性.可剥织物聚四氟乙烯内衬

This test method outlines a recommended procedure for performing bond integrity tests of bonded peelable woven fabric reinforced polytetrafluoroethylene (PTFE) liners, hereafter referred to within this document as PTFE liner or liner. The data from these tests shall be used to determine if the product meets the bond integrity requirements of the applicable specifications. Bearings covered by this test method shall be plain shperical, track roller, journal or rod end bearing with PTFE liners.

Plain Bearing Bond Integrity - Peelable Woven Fabric PTFE Liners

SAE AS27641B-2002 (R)中型抗摩擦机架用滚珠轴承

(R) Bearing, Ball, Airframe, Anti-Friction, Intermediate DutyTABLE - DIMENSIONS AND LOADS

(R) Bearing, Ball, Airframe, Anti-Friction, Intermediate Duty

SAE AS27642B-2002 (R)特轻型机身用滚珠轴承.代替1998年7月23日作废的MS27642G.FSC 3110

(R) Bearing, Ball, Airframe, Extra Light Duty Should Be Used Instead of MS27642G, Which Was Cancelled on 23 July 1998; FSC 3110TABLE 1 - BEARING DIMENSIONS AND MAXIMUM TORQUETABLE 2 - BEARING ECCENTICITIES AND LOADS

(R) Bearing, Ball, Airframe, Extra Light Duty Should Be Used Instead of MS27642G, Which Was Cancelled on 23 July 1998; FSC 3110

ISO 14281:2002 航空航天.有条纹的内十字形精确计量仪或无条纹驱动器.米制系列

This International Standard specifies the dimensions of metric gauges which check internal cruciform drives, ribbed or unribbed, used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. The internal cruciform drives, ribbed and unribbed, are defined respectively in ISO 12256 and ISO 14279.

Aerospace - Gauges for internal cruciform ribbed or unribbed drives - Metric series

ISO 14280:2002 航空航天.有条纹,内十字形驱动器或无条纹驱动器.米制系列

This International Standard specifies the dimensions of metric ribbed drivers which are inserted into internal cruciform ribbed or unribbed drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. The internal cruciform drives, ribbed and unribbed, are defined respectively in ISO 12256 and ISO 14279.

Aerospace - Drivers, ribbed for internal cruciform ribbed or unribbed drives - Metric series

ISO 14279:2002 航空航天.内十字形驱动器.米制系列

This International Standard specifies the dimensions of metric internal cruciform drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. Drivers and gauges used in conjunction with these drives are defined in ISO 14280 and ISO 14281.

Aerospace - Drives, internal, cruciform - Metric series

ISO 14278:2002 航空航天.有条纹的内调整偏差十字形精确计量仪或无条纹驱动器.米制系列

This International Standard specifies the dimensions of metric gauges which check internal offset cruciform drives, ribbed or unribbed, used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. The internal offset cruciform drives, ribbed drives and unribbed, respectively are defined in ISO 14275 and ISO 14276.

Aerospace - Gauges, for internal offset cruciform ribbed or unribbed drives - Metric series

ISO 14277:2002 航空航天.有条纹的内调整偏差十字形驱动器或无条纹驱动器.米制系列

This International Standard specifies the dimensions of metric ribbed drivers which are inserted into internal offset cruciform ribbed or unribbed drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. The internal offset cruciform, ribbed drives and unribbed drives, respectively are defined in ISO 14275 and ISO 14276.

Aerospace - Drivers, ribbed, for internal offset cruciform ribbed or unribbed drives - Metric series

ISO 14275:2002 航空航天.有条纹的内偏距十字交叉驱动器.米制系列

This International Standard specifies the dimensions of metric internal, offset cruciform, ribbed drives used in metric screws in the nominal thread diameter range of 3 mm to 20 mm. Drivers and gauges used in conjunction with these drives are defined in ISO 14277 and ISO 14278.

Aerospace - Drives, internal, offset cruciform, ribbed - Metric series

ISO 14276:2002 航空航天.内偏距十字交叉驱动器.米制系列

This International Standard specifies the dimensions of metric internal, offset cruciform drives used in metric screws in the nominal thread diameter range of 1,6 mm to 20 mm. Drivers and gauges used in conjunction with these drives are defined in ISO 14277 and ISO 14278.

Aerospace - Drives, internal, offset cruciform - Metric series

DIN EN 2130:2002 航空航天系列.仪器和设备用耐腐蚀钢精密滚珠轴承.技术规范; 德文版本 EN 2130:2001

The document specifies the required characteristics for precision ball bearings in corrosion resisting steel for use in instruments and aircraft equipment.

Aerospace series - Bearings, precision ball in corrosion resisting steel for instruments and equipment - Technical specification; German version EN 2130:2001

SAE ARP5448/6-2002 平面关节轴承的符合度检查

This method outlines a standard procedure for performing conformity tests of bearings utilizing liners of bonded polytetrafluoroethylene (PTFE). The data from these tests shall be used to determine if the product meets the conformity requirements of the applicable specification. Bearings covered by this test method shall be spherical bearings with either fabric or fabric composite liners containing PTFE (Type I), or with molded PTFE material (Type II).

Plain Spherical Bearing Conformity Examination

AECMA PREN 2327-2002 航空航天系列.飞行操纵杆用径向锯齿锁紧镀镉合金钢垫圈规范 尺寸.P1版

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA (The European Association of Aerospace Industries). it is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Technical Committee following comment by the Member countries.

Aerospace Series Washers, Lock, with Radial Serrations in Alloy Steel, Cadmium Plated for Flight Control Rods Dimensions Edition P 1

AECMA PREN 2546-2002 航空航天系列 飞行操纵杆用带径向锯齿锁紧钝化耐腐蚀钢垫圈 尺寸 P1版 PrEN2546 2002、PrEN2546、PrEN2546-2002、PrEN 2546-2002、PrEN 2546

This "Aerospace Series" Prestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - standardization). It is published on green paper for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace Series Washers, Lock with Radial Serrations in Corrosion Resisting Steel Passivated for Flight Control Rods Dimensions Edition P 1

AECMA PREN 2328-2002 航空航天系列.飞行操纵杆用镀镉耐腐蚀钢垫圈和垫片 飞行操作机构用镀镉杆 尺寸.P1版

This standard specifies the requirements for aerospace solid rivets, in aluminium or aluminium alloy, inch based series. This standard is applicable whenever it is referenced in a definition document.

Aerospace Series Washers, Tab in Corrosion Resisting Steel Cadmium Plated for Flight Control Rods Dimensions Edition P 1

SAE AMS2762B-2002 渗碳和低合金钢部件

This specification covers the procedure for carburizing and related heat treatments of carbon and low-alloy steel parts to produce case hardening and specified mechanical properties within the capability of each respective steel.

Carburizing, Carbon and Low-Alloy Steel Parts

SAE ARP5483/8-2002 滚动轴承动力径向荷载测试

This test method outlines the recommended machine function, fixtures and procedures used to test airframe rolling element bearings for dynamic performance under steady unidirectional radial load and oscillatory motion. Bearings covered by this test method shall be ball, roller and needle type in either annular or rod end configuration, used in airframe control applications.

Rolling Bearing Dynamic Radial Load Test

SAE ARP5483/7-2002 径向动荷载试验,导轨滚轮轴承

This test method outlines the recommended machine function, fixtures and procedures for performing dynamic radial load tests on track roller bearings for airframe applications. Bearings covered by this test method shall be yoke and stud type track roller, needle bearings.

Dynamic Radial Load Test, Track Roller Bearings

DLA MS51498 VALID NOTICE 1-2002 特大代替物锯齿状高强度线形锁定螺杆嵌件

MS51498, Amendment 1, dated 6 August 1997, has been reviewed and determined to be valid for use in acquisition.

INSERT, SCREW THREAD-LOCKED IN, RING LOCKED, SERRATED, HIGH STRENGTH, OVERSIZE REPLACER