V22 机械配件、构件 标准查询与下载

DLA A-A-59422-2000 机械驱动金属冲剪,开槽和仿形机 [代替:DLA MIL-P-45042 F CANC 通告 1,DLA MIL-P-45042 F,DLA MIL-P-45042 E,DLA MIL-P-45042 D,DLA MIL-P-45042 C(1),DLA MIL-P-45042 C,DLA MIL-P-45042 B]

This commercial item description (CID) covers mechanically driven metalworking machines used for performing punching, shearing, notching, and coping operations on steel bars, structural shapes, and plates of the dimensions and strengths specified herein.

PUNCHING, SHEARING, NOTCHING AND COPING MACHINE, METAL, MECHANICAL DRIVE [Superseded: DLA MIL-P-45042 F CANC NOTICE 1, DLA MIL-P-45042 F, DLA MIL-P-45042 E, DLA MIL-P-45042 D, DLA MIL-P-45042 C (1), DLA MIL-P-45042 C, DLA MIL-P-45042 B]

AECMA PREN 4359-2000 航空系列 六圆形突出部凹槽驱动器技术规范.P1版

This "Aerospace Series" frestandard has been drawn up under the responsibility of AECMA-STAN (The European Association of Aerospace Industries - Standardization). It is published for the needs of the European Aerospace Industry. It has been technically approved by the experts of the concerned Domain following member comments.

Aerospace Series Six Lobe Recess Drivers, Technical Specification Edition P 1

AECMA PREN 4358-2000 航空系列 六圆形突出部凹槽驱动器双端引线90度.P1版

This standard specifies the characteristics of drivers, double ended, 90°, six lobe recess, for aerospace applications.

Aerospace Series Six Lobe Recess Drivers, Double Ended, 90 Degrees Edition P 1

AECMA PREN 4354-2000 航空系列 六圆形突出部驱动器凹槽.P1版

Subsequent to the publication of this Prestandard, the technical content shall not be changed to an extent that interchangeability is affected, physically or functionally, without re-identification of the standard.

Aerospace Series Six Lobe Recess Drivers, Relieved Edition P 1

AECMA PREN 4355-2000 航空系列 六圆形突出部驱动器插座.P1版

This standard specifies the characteristics of drivers, socket, six lobe recess, for aerospace applications.

Aerospace Series Six Lobe Recess Drivers, Socket Edition P 1

AECMA PREN 4356-2000 航空系列 六圆形突出部凹槽驱动器短.P1版

This standard specifies the characteristics of drivers, short, six lobe recess, for aerospace applications.

Aerospace Series Six Lobe Recess Drivers, Short Edition P 1

AECMA PREN 4357-2000 航空系列 六圆形突出部凹槽驱动器手柄.P1版

This standard specifies a test method to determine the adhesion of metallic coatings by shearing action. It applies to coatings with a hardness. It shall a applicable whenever referenced.

Aerospace Series Six Lobe Recess Drivers, Handle Edition P 1

DLA A-A-50041 D-2000 上锁和不上锁的登山锥的弹簧扣环

This commercial item description covers the requirement for locking and nonlocking snap links used in rapelling and erecting fixed rope installation for movement of troops and materials.

SNAP LINK, MOUNTAIN PITON, LOCKING AND NONLOCKING

SAE AIR1047D-2000 航空航天流体系统用快速拆卸式耦合器的选择指南

The factors involved in the selection of a quick-disconnect are grouped into the following classifications for the purpose of discussion: a. functional considerations; b. weight considerations; c. environmental performance factors; d. end fitting types; and e. additional considerations. A quick-disconnect coupling as used in this AIR is one that can be rapidly and repetitively connected and disconnected without excessive fluid loss. The relative importance of the design factors depends upon the fluid medium of the particular system in which quick-disconnect is to be used. The effect of the fluid media on each factor is discussed in this report where applicable. The purpose of this AIR is to guide users in the proper selection of quick-disconnect couplings for their specific application in fluid systems.

A Guide for the Selection of Quick-Disconnect Couplings for Aerospace Fluid Systems

SAE AIR4057A-2000 流体系统可靠性用二次过滤器

This SAE Aerospace Information Report (AIR) discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters. This document explains the use of secondary (or Last-Chance) filters in fluid systems.

Secondary Filters for Fluid System Reliability

SAE AS24461B-1999 I型抗摩擦英寸系列重型单排滚针轴承

Bearing, Roller, Needle, Single Row, Heavy Duty, Type I, Antifriction, Inch

Bearing, Roller, Needle, Single Row, Heavy Duty, Type I, Antifriction, Inch

BS ISO 10955:1999 飞行器操纵钢丝绳用末端接头和松紧套筒.技术规范

This International Standard specifies the characteristics, the inspection and test methods as well as the quality assurance requirements for: — end-fittings swaged on wire ropes, as specified in ISO 9737, ISO 9747, ISO 9748, ISO 9749, ISO 9759 and ISO 9760, — wire rope tumbarrel parts, as specified in ISO 9736, ISO 9738, ISO 9757, ISO 9758 and ISO 9761, and — wire rope turnbarrel assemblies (as defined in 3.1), used in aircraft controls. This International Standard is applicable to the parts cited above providing that reference is made to rt in the product standard or the definition document.

End-fittings and turnbarrels for aircraft control wire rope - Technical specification

SAE AS20659A-1999 175℃总导体温度用1级I型环形舌簧不绝缘铜制卷曲耳端子

An Amendment corresponding to this standard has been published. To download a free copy, go to the SAE website at www.sae.org and search on the document number. The summary page of the standard will display a link for downloading the Amendment.

Terminal, Lug, Crimp Style, Copper, Uninsulated, Ring Tongue, Type I, Class I, for 175°C Total Conductor Temperature

ISO 12280:1999 航空航天 筒形自锁螺母用弹性金属片保持架 尺寸

This International Standard specifies the dimensions of sheet metal spring retainers intended for use with self-locking barrel nuts, ISO 12278. This International Standard is only applicable for the compilation of aerospace product standards.

Aerospace - Retainers, spring, sheet metal, for self-locking barrel nuts - Dimensions

BS W 14:1999 飞机控制钢丝绳组件 技术规格

This International Standard specifies the characteristics, inspections and test methods as well as the quality assurance requirements for aircraft control wire rope assemblies equipped with swaged end fittings. This International Standard is applicable to control wire rope assemblies as defined in ISO 9762.

Aircraft control wire rope assemblies. Technical specification

SAE AS21442-1999 英寸FSC 3110带有轴承滚子和滚针滚轮的轴承耐磨可密封,X型,代替2000年1月24日作废的MS21442B标准

Bearing, Roller, Needle, Track Roller, Sealed, Type X, Antifriction, Inch FSC 3110; Should Be Used Instead of MS21442B, Which Was Cancelled on 24 January 2000TABLE I IS ABOUT CROWN RADIUS REF, TATAL RAOIAL CLEARANCE MAX, TRACKCAPACITY LBS ETC..TABLE II TOLERANCE LIMITS

Bearing, Roller, Needle, Track Roller, Sealed, Type X, Antifriction, Inch FSC 3110; Should Be Used Instead of MS21442B, Which Was Cancelled on 24 January 2000

SAE AS21446-1999 FSC 3110 V型密封式机身用耐磨扭矩管横滚自动校准式单排滚筒轴承.代替2000年1月24日作废的MS21446A

Bearing, Roller, Self-Aligning Single Row, Barrel Roller, Torque Tube, Airframe, Antifriction, Sealed Type V FSC 3110; Should Be Used Instead of MS21446A, Which Was Cancelled on 24 January 2000

Bearing, Roller, Self-Aligning Single Row, Barrel Roller, Torque Tube, Airframe, Antifriction, Sealed Type V FSC 3110; Should Be Used Instead of MS21446A, Which Was Cancelled on 24 January 2000

SAE AS14488-1999 米制、罗纹内径、线式悬挂、塑料环形夹子

Clamp, Loop, Plastic, Wire Support, Ribbed Inner Diameter, Metric FSC 5340TABLE I. DASH NUMBERS AND DIMENSIONS

Clamp, Loop, Plastic, Wire Support, Ribbed Inner Diameter, Metric FSC 5340

SAE AS22805-1999 自加压喷雾组件FSC 4940;应代替在1999年8月30日作废的MIL-S-22805标准

This specification covers the requirements for disposable self-pressurized kits which utilize a propellant can pressurized with a liquified gas to atomize a product contained in a separate but attached jar.

Spray Kit, Self Pressurized FSC 4940; Should Be Used Instead of MIL-S-22805, Which Was Cancelled on 30 August 1999

SAE AMS-STD-401-1999 夹层结构和芯材料;通用测试方法FSC 5680;应代替1999年9月24日作废的MIL-STD-401B标准

This standard covers the general requirements and methods for testing sandwich core materials and for testing sandwich construction of the types used primarily in aircraft structures. This standard does not include test methods applicable only to a specific product; such test methods are included in the detailed specifications for the product.

Sandwich Constructions and Core Materials; General Test Methods FSC 5680; Should Be Used Instead of MIL-STD-401B, Which Was Cancelled on 24 September 1999