V36 总体技术要求 标准查询与下载

SAE ARP499B-1999 乘客出入口门操作

The purpose of this SAE Aerospace Recommended Practice (ARP) is to provide recommendations which will lead to the standardization of passageway door operation in all transport aircraft, by providing in the design, features which will result in minimum exit passage blockage and jamming.

Passageway Door Operation

HB 6121-1999 航空机载设备外贸履历本及产品合格证

本标准规定了航空机载设备外贸产品履历本和产品合格证的格式、排印和内容的填写要求。 　　本标准规定的履历本适用于使用方需作性能检查记录或定期检查记录的产品。本标准规定的产品合格证用于不作性能检查记录或定期检查记录的产品。

Aviation airborne equipment foreign trade resume and product qualification certificate

AIAA S-080-1998 航天系统 金属压力容器、加压结构和压力构件

This standard establishes baseline requirements for the design, fabrication, test, inspection, operation and maintenance of the metallic pressurized hardware used in space systems such as spacecraft and launch vehicles. These requirements when implemented on a particular system, will assure a high level of confidence in achieving safe and reliable operation.

Space Systems - Metallic Pressure Vessels, Pressurized Structures, and Pressure Components

SAE ARP836B-1997 乘客登机梯的安全和设计准则

This SAE Aerospace Recommended Practice (ARP) is broken into various categories for convenience and ease of identification. It is the purpose of this recommended practice to provide certain criteria for the design and selection of stairways, for the boarding of passengers aboard an aircraft. The criteria presented are limited to those factors which affect the safety of the passengers and are coordinated, where applicable, with the practices of the architectural profession, with respect to the design of stairways. The recommended practices are applicable to both mobile variable-elevation type stairways and to fixed-elevation stairways of the type built into an aircraft fuselage.

Design and Safety Criteria for Passenger Boarding Stairways

SAE AIR1752A-1996 飞机头部机轮转向/定中心系统

The intent of this AIR is twofold: 1) to present a descriptive summary of aircraft nosewheel steering and centering systems and 2) to provide a discussion of problems encountered and lessons learned by various airplane manufacturers and users. This document covers both military aircraft (land-based and ship-based) and commercial aircraft. It is intended that the document be continually updated as new aircraft and/or new lessons learned become available.

Aircraft Nosewheel Steering/Centering Systems

SAE ARP921A-1996 亚音速运输机安装的静压系统所用的飞行试验程序

This SAE Aerospace Recommended Practice (ARP) covers the test procedures and equipment for performing flight testing on pitot-static systems installed in subsonic transport type aircraft. The purpose of this document is to present recommendations for the flight testing of static pressure systems as installed in subsonic transport type aircraft.

Flight Test Procedures for Static Pressure Systems Installed in Subsonic Transport Aircraft

HB 7225-1995 飞机整体壁板、框、肋、梁公差和表面质量要求

本标准规定了飞机整体壁板、框、肋、梁的公差及表面质量要求。 　　本标准适用于飞机整体壁板、框、肋、梁的设计和制造。

Tolerance and Surface Quality Requirements for Integral Aircraft Panels, Frames, Ribs, Beams

HB 7115-1994 压气机气动性能试验

本标准规定了压气机气动热力学性能试验方法，提出了对试验设备、测试方法与测量精度的要求。 　　本标准适用于以空气为介质，在开式压气机试验器上试验单级、多级轴流式压气机，也适用于离心式压气机或轴流—离心混合式压气机。

Compressor aerodynamic performance test

SAE AIR737E-1995 航空航天液压与气压规范,标准,推荐的实施规程和信息报告

This SAE Aerospace Informantion Report (AIR) lists military and industry specifications, standards, recommended practices and information reports used in the design of aerospace hydraulic and pneumatic components and systems. It is intended as a supplement to specifications ARP4752, MIL-H-5440, and MIL-P-5518. Only those hardware standards specifically applicable to hydraulic or pneumatic components or systems are listed in this document. The purpose of this document is to provide a single document that lists active aerospace hydraulic and pneumatic specifications, standards, recommended practices and information reports.

(R) Aerospace Hydraulic and Pneumatic Specifications, Standards, Recommended Practices, and Information Reports

ISO 10133:1994 小型飞机.电力系统.超低电压直流电力设备

Small craft - Electrical systems - Extra-low-voltage d.c. installations

HB 7082-1994 飞机机体系留设计要求

本标准规定了飞机机体的系留接头、系留点以及飞机机体传力结构的设计和制造要求，并规定了甲板（或地面）和机库的系留点布置要求。 　　本标准主要用于舰载飞机机体系留的设计和制造，也适用于陆基飞机。

Design Requirements for Aircraft Airframe System

HB 7084-1994 民用飞机结构抗鸟撞设计与试验要求

本标准规定了民用飞机结构抗鸟撞设计与试验要求。 　　本标准适用于新研制的乘员超过19人（不含驾驶员）的运输类飞机的风档、机、尾翼前缘和其它结构的抗鸟撞设计及试验要求。本标准也适用于现有飞机的改进、改型设计。

Anti-bird strike design and test requirements for civil aircraft structures

NAVY MIL-D-81992 B-1994 技术指令的准备

rnk sPeclflcalan iden~~es the requirements for Preparation af fo~al letter type Technical Directives 00s) used to direct the accomplishment and recording of modifications to Weapons, Weopon Systems. Support Equipment (SE), Including Automatic lest Equipment (ATE),

DIRECTIVES, TECHNICAL; PREPARATION OF

JIS W 0401:1994 直升机的飞行和地面维护质量.一般设备

この規格は，へリコプタの飛行性及び地上操作性に関する設計要求事項について規定する。

Helicopter flying and ground handling qualities; General equipment for

NAVY MIL-R-82689-1994 M1A1气体推动式击针装配

This specification covers the requirements for the M1A1 Gas Actuated Firing Pin Release (see 6.1)

RELEASE, FIRING PIN, GAS ACTUATED, M1A1 ASSEMBLY

HB 6633-1992 直升机传动系统一般要求

General requirements for helicopter transmission system

ISO 6702-2:1991 航空器 舱内装载和平衡系统的要求 第2部分:设计、性能和接口特性

Requirements are specified in ARINC 737:1985 together with its Supplement 1 (1988), which are adopted as a de facto ISO International Standard.

Aircraft; requirements for on-board weight and balance systems; part 2: design, performance and interface characteristics

HB 6502-1991 飞机刚度试验与要求

本标准规定了飞机结构刚度试验的目的、内容、方法及要求，这些内容仅对飞机结构刚度试验提供指导和说尽具体的实施办法。 　　本标准适用于各种军用飞机结构（不含直升机）的刚度试验，民用飞机亦可参照使用。

Airplane rigidity test and requirement

JIS W 3901:1991 飞行器.千斤顶立架

この規格は，航空機用主ジャッキ受及び車軸ジャッキ受の外形及び寸法，並びにジャッキ受の周りに設けろべきすきまについて規定する。

Aircraft -- Jacking pads

SAE ARP4101-1988 驾驶舱的布置和设施

This document recommends criteria for the layout and for the design, installation, and operation of flight deck facilities for transport aircraft.

Flight Deck Layout and Facilities