V38 液压、冷气系统及其附件 标准查询与下载

BS M 61:1989 流体系统用“P”型夹具（环形夹具）的外壳尺寸规范

1989-09-29#,"#Specification for envelope dimensions of ""P"" clamps (loop clamps) for fluid systems#"#5135

Specification for envelope dimensions of "P" clamps (loop clamps) for fluid systems

2M 51-1989 液压系统和元件压力和温度分类

Classification for pressure and temperature for fluid systems and components

HB 5931.8-1989 飞机液压系统污染测试-用显微镜对比法测定工作液固体污染度

Contamination Test of Aircraft Hydraulic System - Determination of Solid Pollution Degree of Working Fluid by Microscope Contrast Method

AIR FORCE MIL-J-5513 C VALID NOTICE 1-1989 液压旋转接头

MIL-J-5513Cs dated 05 October 1984, has been reviewed and determined to be valid for use in acquisition

JOINTS, HYDRAULIC SWIVEL

ISO 6772:1988 航空航天 流体系统 液压软管、导管和接头组件的冲击试验

Specifies the requirements and the procedures. Requirements may apply, when appropriate, to components used in other areospace fluid systems. Against the first edition some technical details are revised. Includes the requirements for shape of impulse trace, rate of pressure rise, preparation of specimens, test fluid, principle of test, test method and intended use.

Aerospace; fluid systems; impulse testing of hydraulic hose, tubing and fitting assemblies

SAE MA2157-1988 十字形闷头非扩口管

Design requirements, materials, testing and identification to establish the basic performance and quality criteria for screw-together tube fitting assemblies and port connectors.

Cross, Bulkhead, Flareless Tube

HB 5950-1988 飞机液压、应急气动系统试验要求及方法

Test requirements and methods for aircraft hydraulic and emergency pneumatic systems

ISO 6771:1987 航空航天 流体系统和组件 压力和温度等级

Establishes the temperature types and pressure classes that are commonly used. System operating temperature ranges shall be classified as given in table 1. Nominal pressures shall be classified as given in table 2. The operating pressures listed are selected from ISO 2944 as far as practical.

Aerospace; Fluid systems and components; Pressure and temperature classifications

ISO 5884:1987 航空航天 流体系统和组件 液压油液固体颗粒污染的系统取样和测量方法

Specifies procedures for determining the level of contamination. Three procedures are specified herein: microscopic method, automatic particle counting method and gravimetric method. In addition lays down the procedures for cleaning the apparatus and sample bottles, and specifies the solvents to be applied and how these solvents shall be prepared. Requirements as to the selection of the sampling point and to different sampling methods are also specified.

Aerospace; Fluid systems and components; Methods for system sampling and measuring the solid particle contamination of hydraulic fluids

DLA MS51842 REV D-1987 液压非扩口式O形圈轴套45度弯管

Steel,carbon in a accordance with procuments specification.

ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51843 REV D-1987 液压非扩口式O形圈轴套直管适配器

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51839 REV D-1987 液压非扩口式O形圈轴套90度弯管

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

ELBOW, TUBE TO BOSS, 90 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51852 REV C-1987 液压非扩口式三通管接头

Steel, carbon i n accordance with procurement specification.

ELBOW, TUBE TO SWIVEL, 90 DEGREE, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51822 REV E-1987 液压非扩口式管子承头三岔管

Steel, carbon in accordance with procurement specification.

TEE, PIPE TO TUBE, FEMALE PIPE ON RUN, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51853 REV C-1987 液压非扩口式三通管接头

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51821 REV E-1987 液压非扩口式管子承头三岔管

steel , carbon i n accordance with procurement specification .

TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51854 REV C-1987 液压非扩口式三通管接头

IUTUIN.: Steel, carbon In accordance vith procurement specification.Steel, corrosion-reiirtii in accor&nce with procurement specification.

TEE, TUBE TO SWIVEL, SWIVEL ON RUN, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51820 REV E-1987 90度液压弯管接头

Steel, corrosion-resisting i n accordance with procurement specification.

ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51816 REV E-1987 非扩口液压管,承头直管适配器

Steel, carbon in accordance with procurement specification.

ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE ON END, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]

DLA MS51855 REV C-1987 液压非扩口式舱壁90度弯管

Steel, carbon i n accordancc with procurement specification .

ELBOW, TUBE, 90 DEGREE, BULKHEAD, FLARELESS TYPE, HYDRAULIC [Refer To: SAE J514, SAE J514, SAE J514, SAE J514, SAE J514]