V39 燃油系统及其附件 标准查询与下载

HB 6367-1989 航空发动机燃油与控制系统术语

本标准规定了航空发动机燃油与控制系统的基本词汇与术语。 　　本标准适用于航空发动机燃油与控制系统的标准、合同、产品说明、设计资料等技术文件。

Aeroengine fuel and control system terminology

NAVY MIL-STD-1322-100-1989 MK 20 MOD 0型爆炸组件,用于国内和海外输送的集装物资,置于MK 569 MOD 0型集装箱内

FABRICATE TWO FRAME ASCEUBLIES AS SHOWN IN DETAIL A WIT9 THE STRAPPING, ITEM 4, POSITIONED AS SHOWN. TENSION AND DOUBLE NOTCH THE SEAL, ITEM 5, AND SECURE THE STRAPPING WITH STAPLES, ITEM 6.

UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT EXPLODER ASSEMBLY, MK 20 MOD 0 IN CONTAINER MK 569 MOD 0

HB 6210-1989 FYX-800型分解式飞机副油箱 技术条件

本标准规定了FYX-800型分解式飞机副油箱的设计、制造和试验要求。 　　FYX-800型分解式副油箱是一种通用的飞机外部燃油箱，适用于采用GJB1A-85《机载悬挂物和悬挂装置接合部位的通用设计准则》规定的762mm吊耳间距吊挂系统的各种军用飞机的机身和机翼下挂用，以增加飞机的航程，在某些飞行状态下可弹射投放。

Specifications for FYX-800 Decomposed Aircraft Auxiliary Fuel Tank

HB/Z 146-1989 飞机燃油系统通用设计规范

本规范规定了飞机燃油系统的设计、性能、相容性及验证要求。 　　本规范中所包括的各项要求和验证，适用于军用飞机燃油系统及设备的研制。本规范用以指导工程技术人员进行飞机燃油系统的设计。

General design specification for aircraft fuel system

NAVY A-A-50432-1989 海运船大柄铰链

The General Services Administration has authorized thoef tuhsies　commercial item descriptioni n preference to Military Spécification　MIL-H-1237.

HINGE, BUTT (SHIPBOARD/MARINE)

NAVY MIL-G-24717-1989 无海绵冷却垫圈薄片

This specification establishes the requirements for nonasbestos formulated sheet gasket material for refrigeration service applications up to 150 pounds per square inch ) (lgba/uigne , 2 275 degrees Fahrenheit ("F) (135 degrees Celsius ("C)) andi n vacuum service applications up1 8t oi n mercury (Hg) gauge, minus 60°F (minus 51

GASKET, SHEET, REFRIGERATION, NON-ASBESTOS

NAVY MIL-STD-1322-55 VALID NOTICE 1-1989 火烧性材料,用于国内和海外输送的集装物资,置于DRUM PPP-D-729 IV型55加仑铁桶内

MIL-STD-1322/55 (OS) dated 03 DEC. 1982,has been reviewed and determinedta be valid -foi- use inacquisition .

UNIT LOAD FOR DOMESTIC& OVERSEAS SHIPMENT HAZARDOUS MATERIALS IN 55 GALLON STEEL DRUM PPP-D-729 TYPE IV

NAVY MIL-STD-1322-48 VALID NOTICE 1-1989 集装海运运载国内和海外舰队标记和位置 MK 25 MOD 3 置于 LD615124集装箱

MIL-B-2029F, dated 25 February 1983, has been reviewed and determined to be valid for use in acquisition.

UNIT LOAD FOR DOMESTIC AND OVERSEAS SHIPMENT MARKER, LOCATION, MARINE MK 25 MOD 3 IN CONTAINER LD615124

NAVY MIL-T-960 E VALID NOTICE 1-1989 海军舰间歇放电和连续流蒸汽陷阱

MIL-T-960E(SHIPS), dated 21 June 1963, has been reviewed and determined to be valid for use in acquisition.

TRAPS, STEAM, INTERMITTENT DISCHARGE AND CONTINUOUS FLOW, NAVAL SHIPBOARD

NAVY MIL-S-24950-1989 男式长袖白色制服衬衫(海岸巡逻队队员)

This specification covers the requirements for a man's white poly/cotton poplin shirt.

SHIRT, MAN'S, DRESS WHITE, LONG SLEEVE (CG)

AIR FORCE MIL-P-87897 VALID NOTICE 1-1988 氘推进剂

MIL-P-87897, dated 1 October 1982, has been reviewed and determined to be valid for use inacquisition.

PROPELLANT, DEUTERIUM

NAVY MIL-B-24947-1988 胸衬和徽章识别(美军海岸巡逻队队员)

This specification is approved for use by the United States Coast Guard,Department of Transportation and is available for use by all Departments and Agencies of the Department of Defense.

BADGE, BREAST, IDENTIFICATION (U.S. COAST GUARD)

ARMY MIL-C-13609 B VALID NOTICE 1-1988 OGK和AHH 推进剂OIA用铸造溶剂

MIL-C-l3609B(AR), dated 25 November 1974, has been reviewed and determined to be valid for use in acquisition.

CASTING SOLVENT FOR OIA, OGK AND AHH PROPELLANTS

ARMY MIL-I-14961 VALID NOTICE 1-1988 M1A1.M2A1.M3A1.M181及M182型推进剂增量(用推进剂M8制作)

M.IL-I-l4961(AR), dated 17 February 1969, with &mxlment 3, dated 11 December 1974, has been reviewed and detdned to be valid for use in acquisition.

INCREMENTS, PROPELLANT M1A1, M2A1, M3A1, M181 AND M182 (MADE FROM PROPELLANT, M8)

HB/Z 133-1988 发动机燃油控制系统压差活门设计指南

本指南规定了航空发动机燃油控制系统中压差活门组件的设计内容、技术性能、计算公式和特性，以及试验等方面的要求。 　　本指南适用于航空发动机燃油控制系统中的压差活门，可作为设计时的依据。其它系统中的压差活门也可参照执行。

Design guidelines for differential pressure valves in engine fuel control systems

HB 6178-1988 电容式燃油油量测量系统的安装和校准

本标准规定了符合ＨＢ５８５８－８４规定的电容式燃油油量测量系统（以下简称油量测量系统）的安装和校准。

Installation and Calibration of Capacitive Fuel Quantity Measuring System

HB/Z 134-1988 发动机燃油控制系统齿轮式燃油泵设计指南

本指南规定了航空发动机燃油控制系统中齿轮式燃油泵的原始设计参数和要求、设计计算公式、结构形式设计、材料选择、热处理方法、试验要求等一般内容。 　　本指南适用于外啮合直齿渐开线齿型的二齿轮式燃油泵。

Design Guide for Gear Fuel Pumps in Engine Fuel Control Systems

HB 6171-1988 航空发动机燃油泵汽蚀持久性试验方法

本标准规定了在航空发动机型号规定规定的汽－液比条件下，航空发动机燃油泵抗汽蚀能力的试验方法。本标准不规定试验对象的海拔高度或爬升率。 　　本标准适用于发动机燃油系统的所有泵，包括发动机辅助燃油泵、主系统燃油泵和加力系统燃油泵。

Aeroengine fuel pump cavitation durability test method

NAVY MIL-V-16556 E-1988 三路绕道电磁阀(海军舰载使用)

This specification covers three-way bypass valves, solenoid operated, for use as salinity actuated dump valves.

VALVE, SOLENOID, THREE-WAY BYPASS (NAVAL SHIPBOARD USE)

NAVY MIL-V-22687 C-1988 用于空运，氮气，氦气或液压服务的海军舰载使用球阀(尺寸2-1/2英寸NPS及以下)

This specification covers corrosion-resisting steel, bronze, aluminum-bronze and naval brass ball valves in sizes 2-1/2 inches nominal pipe size (nps) and below,

VALVES, BALL, NAVAL SHIPBOARD, FOR AIR, NITROGEN, HELIUM OR HYDRAULIC SERVICE (SIZES 2-1/2 INCHES NPS AND BELOW)