共找到 1139 条与 电气系统与设备 相关的标准,共 76 页
Preparation and installation requirements for space science experiment samples before launch
Minimum performance specification for Beidou satellite-based augmentation system single-frequency augmentation service airborne equipment
本文件规定了用于飞机轻型电缆和航空航天应用的铝合金和铜包铝(CCA)导体的尺寸、电气特性和机械特性。 本文件适用于标称截面积范围为0.25 mm2 ~107 mm2 的绞合导体。
Aerospace—Wire, aluminium alloy and copper-clad aluminium conductors—General performance requirements
本标准规定了空间用光纤光栅传感系统的要求、质量保证规定与交货准备。 本标准适用于空间用光纤光栅传感系统(以下简称光纤光栅传感系统 )的研制、生产、检验和验收。 其他光纤光栅传感系统可参照执行。
General specification for fiber bragg grating sensing system for space application
Ground-based verification requirements for space science experiments
General requirements for solid-state remote power controllers of aircraft
General requirements for hybrid remote power controllers of aircraft
GB/T 35853的本部分给出了航空航天用螺栓螺母相关术语的等效术语表。 本部分适用于航空电气设备。
List of equivalent aero terms—Part 3: Aero bolt and nut
GB/T 35853的本部分给出了航空航天用铆钉相关术语的等效术语表。 本部分适用于航空飞机结构。
List of equivalent aero terms—Part 2: Areo rivet
List of aerospace equivalent terms—Part 5:Environmental and operating conditions for aircraft equipment
List of aerospace equivalent terms—Part 6:Standard atmosphere
List of aerospace equivalent terms—Part 1: Aerospace electrical equipment
Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment
Identification system for crimp-removable contacts for electrical connectors of aircraft
Identification marking of aircraft electrical cables
Dimensions and characteristics of conductors for general purpose aircraft electrical cables and aerospace applications
Vocabulary for aircraft electrical cables and cable harnesses
本标准规定了用于飞机28 V直流或115 V/200 V‵400 Hz 三相交流系统〈具有ISO1540 規定特﹨性)的触头额定电流值不小于5 A〈交流、直流)的电磁继电器和接触器〈以下简称“产品”)的性能要求。 辅助触头可有较低额定值。 木标准规定的产品分为三个温度等级和三类密封。 本标准适用于由28 V直流或11…V‵400 Hz交流电压控制的电磁动作、磁保持或者电磁动作、机械或磁自锁定的单极、多极产品”
General requirements for electromagnetic relays and contactors of aircraft
本标准规定了机载用电设备电源输入端的供电特性,向为了适应新型民用飞机上的各种电源而设计的用电设备[如通过了技术标准规定(TSO)认证的用电设备]提供接口定义。具有单一用途或特殊军事用途的设备可不遵循本标准,以免由于追求多用途而导致设备性能降低。本标准也提供了制定这些要求的背景,供现代飞机电气系统设计和(或)集成者参考。供电品质是电源、配电和用电设备相互作用的结果。一旦规定了用电设备的限制要求,也就确定了支持整个系统开发的关键电源设备和配电设备的接口背景。本标准考虑了在小型和大型运输类飞机都可能遇到的多种电源类型和配电参数。电源分为旋转式和静变式,可能是机载电源,也可能是作为地面支持设备之一的地面电源。本标准涉及到的供电电压种类有:--直流14 V、28 V和42 V(标称值);--单相交流26 V 400 Hz(标称值);--单相或三相交流115 V/200 V和230 V/400 V(标称值),恒频400 Hz或频率范围包括400 Hz的变频。
Characteristics of aircraft electrical system
本标准规定了飞机供电系统中使用的固态遥控功率控制器(以下简称功率控制器)的通用设计和性能要求。 功率控制器由固态开关装置和相关的固态电路组成,完成保护.控制信号驱动和提供状态信息等功能。 本标准适用于飞机园态遥控功率控制器的研制。
General requirements for solid-state remote power controller of aircraft
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号