V44 生命保障系统与设备 标准查询与下载

ISO 1465:1989 航空器 液态氧充填接头 相配尺寸

Specifies the mating and clearance dimensions. The mating dimensions and characteristics of the ground half shall conform to those in figure 1 and table 1. The aircraft half shall mate with the ground half. The clearance envelope in the aircraft to accommodate the ground half for the purposes of coupling and uncoupling the hose unit shall be in accordance with figure 2 and table 2.

Aircraft; liquid oxygen replenishment couplings; mating dimensions

HB 6361-1989 降落伞缝合部（绸、布类）

本标准规定了降落伞常用绸、布类缝合部（以下简称缝合部）的线迹、线缝及缝合部结构和基本参数。并给出了部分单一材料缝合部的缝合强度系数。 　　本标准适用于降落伞产品设计与制造。

Parachute seams (silk, cloth)

BS 2C 11:1988 飞机压力舱地面压力测试连接规范

Basic dimensional and access clearance requirements for test connections on pressurized aircraft for coupling with ground pressurizing equipment.

Specification for ground pressure test connections for aircraft pressure cabins

2C 11-1989 飞机压力舱的地面压力试验连接件规范

Specification for ground pressure test connections for aircraft pressure cabins

ARINC 718-4 ITEM 6.0-1989 控制面板设计

Control Panel Design

Control Panel Design

SAE ARP503E-1989 紧急疏散照明

The purpose of this Aerospace Recommended Practice (ARP) is to provide criteria which will lead to standards of illumination for emergency evacuation in passenger or cargo transport aircraft such that the emergency illumination will facilitate egress under emergency conditions.

Emergency Evacuation Illumination

SAE ARP1356A-1989 救生筏

This Aerospace Recommended Practice (ARP) establishes criteria for the design and performance of aircraft life raft devices which will ensure their rapid and effective use as a flotation device in a water landing. This document is not intended to specify particular design methods, mechanisms, or equipment to be used to accomplish the objectives established herein.

Life Rafts

SAE ARP4101/6-1988 飞行机组救生紧急情况和杂项设备的存放[代替:SAE ARP 917B,SAE ARP 917A]

This document recommends general specifications for the location, accessibility and restraint for those items of survival, emergency, and miscellaneous equipment which are intended to be used by the flight crew, and which are stowed on or near the flight deck.

Stowage of Flight Crew磗 Survival Emergency and Miscellaneous Equipment [Superseded: SAE ARP 917B, SAE ARP 917A]

HB 6169-1988 降落伞产品型号命名方法

本标准规定了降落伞、空靶、拦阻装置的型号命名方法。 　　降落伞、空靶、拦阻装置中的零、组件，在作为零备件订货单独出厂时，不编产品型号。

Naming method of parachute product model

HB 6177-1988 飞机阻力伞系统一般要求

本规范规定了飞机研制、生产和改进所装备的飞机阻力伞系统的一般要求。 　　本规范规定的阻力伞系统用于配合机轮刹车装置，缩短飞机的着陆滑跑距离。对于不同型号飞机的阻力伞系统应按合同（或协议）条款执行。

General requirements for aircraft drag parachute systems

HB 6170-1988 飞行人员加压供氧系统设计规范

本规范规定了升限超过12Km的战斗机飞行人员加压供氧（气氧）系统设计的通用要求。 　　本规范适用于飞行人员加压供氧（气氧）系统设计、附件设计和安装设计。

Code for design of pressurized oxygen supply system for pilots

SAE ARP4153-1988 运输机空中防撞系统的人性因素准则

This document sets forth design and operational recommendations concerning the human factors issues and criteria for airborne collision and avoidance systems. The visual and aural characteristics are covered for the display of traffic information as well as the escape maneuver display on conventional and electronic flight decks. System utilization philosophy and flight deck integration considerations are also presented.

Human Interface Criteria for Collision Avoidance Systems in Transport Aircraft

NAVY MS3326 VALID NOTICE 1-1987 5,000 BC方形驱动底座及零件设计标准

MS3326 (AS) dated 12 Jun 1968, has been reviewed and determined to be current.

DRIVE PAD - ACCESSORY, 5,000 BC SQUARE, DESIGN STANDARD FOR

NAVY MS3329 REV A VALID NOTICE 1-1987 10,000 BC圆形驱动底座及零件设计标准

MS3329A(AS), dated 20 Nov 1.969, has been reviewed and determined to be current .

DRIVE PAD - ACCESSORY, 10,000 BC ROUND, DESIGN STANDARD FOR

NAVY MS3325 VALID NOTICE 1-1987 2.653BC方形驱动底座及零件设计标准

MS3325(AS), dated 12 Feb 1968, has been reviewed and determined to be current .

DRIVE PAD-ACCESSORY, 2.653 BC SQUARE, DESIGN STANDARD FOR

SAE AS8047-1987 用于飞机紧急情况的航班空服员便携式保护呼吸设备性能标准

This aerospace standard (AS) defines the requirements of portable protective breathing equipment for use during smoke/fire conditions on board an aircraft.

Performance Standard for Cabin Crew Portable Protective Breathing Equipment for Use During Aircraft Emergencies

HB 6102-1986 乘员应急离机救生系统名词术语

本标准规定了乘员应急离机救生系统常用名词术语。 　　本标准适用于航空救生专业的技术标准、技术文件、教材、手册和参考资料。

Crew emergency exit life-saving system terminology

C 20-1986 飞机用气态氧补充灌注连接件规范(英制尺寸

Specification for aircraft gaseous oxygen replenishment connection (inch dimensions)

HB 5879.17-1985 降落伞缝合部 绳子系结并缝

本标准的内容包括：厚型带、套带、套绳、带子及绳子缝合部，共１７种４９项标准。各项标准不仅给定了针脚密度、缝合长度以及缝合强度系数，而且还规定了材料、缝线及机针。 　　本标准适用于降落伞（含空靶、拦阻网）有关绳、带类缝合部的设计。

Parachute seam rope knotted and sewn

HB 5879.2-1985 降落伞缝合部 厚型带折缝四点交叉缝合

本标准的内容包括：厚型带、套带、套绳、带子及绳子缝合部，共１７种４９项标准。各项标准不仅给定了针脚密度、缝合长度以及缝合强度系数，而且还规定了材料、缝线及机针。 　　本标准适用于降落伞（含空靶、拦阻网）有关绳、带类缝合部的设计。

Parachute Seam Thick Four Point Cross Stitch with Crease