V91 刀具 标准查询与下载

QJ 2211-1991 加工不锈钢用丝锥技术条件

Technical conditions of taps for processing stainless steel

HB 4446-1990 加工钛合金通孔MJ螺纹的机、手用丝锥 d=5～22mm.P=0.8～1.5mm

Machine and hand taps for processing titanium alloy through-hole MJ threads d=5~22mm.P=0.8~1.5mm

HB 4447-1990 加工钛合金MJ螺纹的机、手用丝锥 技术条件

本标准规定了加工钛合金MJ螺纹的机、手用丝锥的技术要求、性能试验、标志和包装的基本要求。 　　本标准适用于公称直径5～22mm，螺距0.8～1.5mm的加工钛合金MJ螺纹的机、手用丝锥。

Technical conditions for machine and hand taps for processing titanium alloy MJ threads

HB 4499-1990 加工高强度钢通孔MJ螺纹的机、手用丝锥 d=5～39mm.P=0.8～2mm

Machine and hand taps for processing high-strength steel through-hole MJ threads d=5~39mm.P=0.8~2mm

QJ 1958-1990 丝锥槽铣刀样板

Tap groove milling cutter template

QJ 1959-1990 普通螺纹圆板牙用丝锥

Ordinary thread circular die with tap

QJ 1957-1990 丝锥槽铣刀

Tap slot milling cutter

AECMA PREN 3612-1990 航空航天系列.方栓切口.P1版

This standard defines the undercuts for splines, when splines are manufactured with slotting tools. The undercuts provide a cavity for slotting tool runout and chip clearance.

Aerospace Series Undercuts for Splines Issue P 1

SAE J1580-1989 刃口和端铲齿用米制沉孔

This document is to be used on cutting edges and end bits in conjunction with metric bolts typically used on off-road, self-propelled work machines as described in SAE J1116. This document specifies the principle shapes and dimensions for countersunk square holes.

Metric Countersunk Holes for Cutting Edges and End Bits

HB 4279-1989 气铣刀技术条件

本标准适用于HB 4278-1989《气铣刀》部标准及在图纸上注有本技术条件的其它气动工具的制造与验收。

Technical conditions for pneumatic milling cutter

HB 4278-1989 气铣刀

Pneumatic milling cutter

HB 4200-1989 加工淬火钢硬质合金机用铰刀 技术条件

本标准适用于加工淬火钢硬质合金机用铰刀。

Technical conditions for machine reamer of hard alloy for machining quenched steel

HB 4199-1989 加工淬火钢硬质合金全套式机用铰刀 ｄ＝３７．７~８０ｍｍ

Total shell machine reamer of hard alloy for machining quenched steelｄ＝37．7~80ｍｍ

HB 4198-1989 加工淬火钢硬质合金带前后引导机用铰刀 ｄ＝２５．７~４０ｍｍ

Machine reamer of hard alloy with front and rear guiding parts for machining quenched steelｄ＝２５．７~４０ｍｍ

HB 4197-1989 加工淬火钢硬质合金带前后引导机用铰刀 ｄ＝７．７~２５ｍｍ

Machine reamer of hard alloy with front and rear guiding parts for machining quenched steelｄ＝7．7~25ｍｍ

HB 4195-1989 带前后引导的刀杆（用于硬质合金套式机用扩孔钻和加工淬火钢硬质合金套式机用铰刀 ｄ＝37.5~８０ｍｍ

Reamer holder with front and rear guiding parts (for shell machine expanding drill of hard alloy and shell machine reamer of hard alloy for machining quenched steelｄ＝37.5~80ｍｍ

QJ 1776-1989 普通螺纹用滚丝轮（d＝2.5～45mm）

Thread rolling wheel for common thread (d=2.5~45mm)

QJ 1774-1989 普通螺纹用圆板牙（d=1～52mm）

Circular die for common thread (d=1~52mm)

QJ 1775-1989 普通螺纹用圆板牙技术条件

Technical conditions for circular dies for ordinary threads

QJ 1777-1989 普通螺纹用滚丝轮技术条件

Specifications for thread rolling wheels for ordinary threads