W50 化学纤维综合 标准查询与下载

KS L ISO 3374:2003 增强制品.毡和织物.单位面积质量的测定

이 규격은 유리나 카본 또는 아라미드실을 갖고 제조하는 매트(절단 또는 연속 섬유 매트)

Reinforcement products－Mat and fabics－Determination of mass per unit area

KS L ISO 3343:2003 纺织玻璃纤维.纱线.捻度平衡指数的测定

이 규격은 합사와 케이블 섬유 유리실(이하 실이라 한다.)의 꼬임수를 측정하는 방법을

Textile glass-Yarns-Determination of twist balance

KS L ISO 1887:2003 纺织玻璃纤维.易燃物质含量的测定

이 규격은 유리 섬유로 만든 장섬유사, 스테이플사, 로빙, 절단 섬유, 밀드 섬유, 직물,

Textile glass-Determination of combustible-matter content

KS L ISO 4602:2003 纺织玻璃纤维.织物.单位长度经纱和纬纱的纱数的测定

이 규격은 유리 섬유, 탄소 섬유, 아라미드 섬유 및 기타 강화용 섬유의 보강 재료 직

Reinforcements―Woven fabrics―Determination of number of yarnsper unit length of warp and weft

SN/T 1206-2003 纺织品.氨纶/胶乳定量化学分析方法

Textile-Method of quantitative chemical analysis for spandex and latex

ARMY MIL-I-12718 F (4)-2003 陆军和空军杰出织物徽章[使用:军事MIL-I-0012718 E]

The replacement or addition pages listed below are attached at the end of this document.

INSIGNIA, DISTINGUISHING, ARMY AND AIR FORCE, WOVEN [Use In Lieu Of: ARMY MIL-I-0012718 E]

ASTM D885-03 人工有机纤维制轮箍绳、轮箍绳织物和工业丝纱的标准试验方法

1.1 These test methods cover the testing of industrial filament yarns made wholly of manufactured organic-base fibers, cords twisted from such yarns, fabrics woven from such cords, and products that are made specifically for use in the manufacture of pneumatic tires. They may be applied to similar yarns and cords used for reinforcing other rubber goods and for other industrial applications. The test methods apply to nylon, polyester, rayon, and aramid yarns and tire cords twisted from such yarns and to fabrics made from such cords. The yarn or cord may be wound on cones, tubes, bobbins, spools, or beams; may be woven into fabric; or may be in some other form. The methods include testing procedure only and include no specifications or tolerances.1.2 No procedure is included for the determination of fatigue resistance of cord, but several commonly used procedures for the measurement of fatigue resistance of cords in rubber were published in the appendix of these test methods in the 1967 Annual Book of ASTM Standards, Part 24, and in earlier issues of Test Methods D 885.1.3 The sections on "Growth of Conditioned Yarns and Cords," "Properties of Yarns and Cords at Elevated Temperature," and "Properties of Wet Yarns and Cords" have been moved to as non-mandatory informational items because of their very limited use by the industry and because precision and bias statements are not included.1.4 This standard includes the following sections: SectionAdhesion of Cord to Elastomers34Bibliography of Tire Cord Test MethodsX5Breaking Strength (Force) of Yarns and Cords at Elevated Tempera-tureX2.3Breaking Strength (Force) of Conditioned Yarns and Cords16Breaking Strength (Force) of Oven-Dried Rayon Yarns and Cords23Breaking Strength (Force) of Rayon Yarns and Cords at SpecifiedMoisture Regain Level, Adjustment of17Breaking Tenacity of Conditioned Yarns and Cords18Breaking Tenacity of Oven-Dried Rayon Yarns and Cords24Breaking Toughness of Yarns and Cords28Commercial Mass9Conditioning7Contraction of Wet Yarns and CordsX3Count of Tire Cord Fabric37Dip (Adhesive) Solids Pickup on Yarns and Cords33Elongation at Break of Conditioned Yarns and Cords19Elongation at Break of Oven-Dried Rayon Yarns and Cords25Elongation of Rayon Yarns and Cords at a Specified Moisture RegainLevel, Adjustment of Observed20Extractable Matter in Yarns and Cords32Force at Specified Elongation (FASE) of Conditioned Yarns andCords21Force at Specified Elongation (FASE) of Oven-Dried Rayon Yarns andCords26Growth of Conditioned Yarns and CordsX1Identification of Fibers8Keywords40Linear Density11Mass of per Unit Area of Tire Cord Fabric36Modulus of Conditioned Yarns and Cords22Moisture Regain, Actual10Precision and Bias of Certain Yarn and Cord Tests39 35 toProperties of Tire Cord Fabric38Sampling6Shrinkage Force of Conditioned Yarns and Cords at Elevated TemperatureX2.5Shrinkage of Conditioned Yarns and Cords at Elevated TemperatureX2.4Significance and Use, General5Significance ......

Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Man-Made Organic-Base Fibers

ASTM D2199-03(2013) 增塑剂从乙烯基织物迁移至喷漆测量的标准试验方法

3.1 Plasticizers in finished vinyl fabric can be transferred to coatings with which they come in contact. When this takes place, objectionable marring and softening occur. This test method covers an accelerated test for measurement of this tendency. 1.1 This test method covers an accelerated test for the measurement of a tendency for plasticizers in finished vinyl fabric to be transferred to coatings with which they come in contact. Note 1—Age of fabric sample may affect results of test. To ensure most reliable results, test with fabric sample closest in age to what will be coated. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

JIS L 1017:2002 化学纤维轮胎帘布线试验方法

この規格は，化学繊維(レーヨン，ナイロン，ビニロン，ポリエステル及フアラミドのフィラノント糸のタィヤコード，タイヤコードすだれ織物及びその原糸の試験方法について規定する。

Test methods for chemical fibre tire cords

SN/T 1065-2002 出口粘钎本色布检验规程

Rules for the inspection of spun rayon fabric for export

SN/T 1064-2002 出口涤纶本色缝纫用纱线检验规程

Rules for the inspection of spun polyester sewing thread for export

SN/T 1057-2002 出口色织氨纶绉布检验规程

Rules for the inspection of spandex yarn dyed fabrics for export

ARMY MIL-I-12718 F NOTICE 3-2001 陆军和空军杰出织物徽章

MIL-I-12718F, dated 25 January 1999, is hereby reactivated and may be used for either new or existing design acquisition.

INSIGNIA, DISTINGUISHING, ARMY AND AIR FORCE, WOVEN

ISO 3616:2001 纺织玻璃纤维 毡 平均厚度、加载厚度和加载后复原厚度的测定

This International Standard specifies a method for the determination of the average thickness, the thickness under load and the recovery after compression of chopped-strand and continuous-filament textile-glass mats.

Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression

FZ/T 64007-2000 机织树脂衬布

本标准规定了机织树脂衬布的产品分类、技术要求、试验方法、检验规则及包装和标志。 本标准适用于鉴定服装工业专用的棉及化纤纯纺、混纺各类本白、半漂、漂白和染色机织树脂衬布的质量。 本标准不适用于鉴定非树脂机织衬布、针织衬布和非织造衬布的质量。

Resin-finished interlinings of woven fabrics

CGSB 4.2 NO. 27.10-00-CAN/CGSB-2000 纺织品阻燃性试验方法.垂直排列纺织品纤维或纤维制成试验

Textile Test Methods Flame Resistance - Vertically Oriented Textile Fabric or Fabric Assembly Test

Methodes pour Epreuves Textiles Resistance A L'Inflammation - Textiles Ou Ensambles De Textiles Orientes Veriticalement

ISO 3374:2000 增强制品 毡和织物 单位面积质量的测定

This International Standard specifies a method for determining the mass per unit area of mats (either chopped-strand mat or continuous-strand mat) or fabrics which may be manufactured with glass or carbon or aramid yarns.

Reinforcement products - Mats and fabrics - Determination of mass per unit area

ISO 3341:2000 纺织玻璃纤维 纱线 断裂强力和断裂伸长的测定

1 This International Standard specifies a method for the determination of the tensile breaking force and elonga-tion at break of glass yarns taken from packages. 2 The method is applicable to various types of glass yarn (single, folded, cabled, strands, structures without twist, rovings, etc.). It is basically intended for single, folded and cabled glass yarns having a diameter of less than 2 mm, or a linear density lower than 2 000 tex, taken from packages. Heavier yarns may be also tested providing the test conditions are acceptable to all interested parties. 3 The method is not applicable to glass yarns which, in equilibrium with the standard atmosphere and under a pre-tension of 5 mN/tex, are elongated by more than 0,5 %. Such yarns can be tested using a lower pre-tension (for example 2,5 mN/tex or 1 mN/tex), acceptable to all interested parties. This would occur mainly when dealing with sta-ple-fibre yarns. NOTE 1 Though the determination may be run on beamed yarn or on yarns taken from fabrics, the results must be considered as indicative only. NOTE 2 This test method is primarily intended for material characterization and quality control. Fibre-to-fibre abrasion and other factors such as insufficiently uniform tension (catenary) will increase variability and generate low test values. This will conse-quently impede accurate correlation between performance of the yarns and end use applications. Extreme care should be taken in considering this method for specification purposes. NOTE 3 Though this International Standard provides the possibility of determining the elongation at break, this practice is not recommended, however. Indeed, a correct assessment of the elongation will only be obtained using an extensometer; it will not be obtained by measuring the distance traversed by the moving clamp. On the other hand, experience shows that the use of an ex-tensometer is quite delicate and often causes damage to the specimen.

Textile glass - Yarns - Determination of breaking force and breaking elongation

ASTM D1447-00 用纤维照影机测量法测定棉纤维的长度和长度均匀度的标准试验方法

This test method is considered satisfactory for acceptance testing when the levels of the laboratories are controlled by the use of the same reference standard cotton samples because the current estimates of between-laboratory precision are acceptable under these conditions. In case of dispute, the statistical bias, if any, between the laboratory of the purchaser and the laboratory of the seller should be determined with each comparison being based on testing randomized specimens from one sample of material. Fibrograph measurements provide a relatively fast method for determining the length and length uniformity of the fibers in a sample of cotton in a reproducible manner. Results of the Fibrograph length tests do not necessarily agree with those obtained by other methods for measuring lengths of cotton fibers because of the effect of fiber crimp and other factors. Fibrograph tests are more objective than commercial staple length classifications and also provide additional information on fiber length uniformity of cotton fibers. The cotton quality information provided by these results is used in research studies and quality surveys, in checking commercial staple length classifications, in assembling bales of cotton into uniform lots, and for other purposes. Fibrograph measurements are based on the assumptions that a fiber is caught on the comb in proportion to its length as compared to total length of all fibers in the sample and that the point of catch for a fiber is at random along its length.1.1 This test method covers the measurement of the length and length uniformity of cotton fibers by use of the Fibrograph. The test method is applicable to fibers taken from raw or partially processed cotton or some types of cotton waste, but not to fibers from blends of cotton with other fibers or to fibers recovered from cotton yarns or fabrics.1.2 This test method covers procedures for all models of the Digital Fibrograph, hereafter referred to as Fibrograph. Note 1--Instructions for the use of Manual and Servo Fibrograph Models were included in the text of Test Method D1447 in 1971 and previous editions.Note 2--For other methods covering the measurement of the length of cotton fibers refer to Test Method D1440.1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Length and Length Uniformity of Cotton Fibers by Fibrograph Measurement

JIS L 1089:1999 层叠织物的检验方法

本标准用于衣用粘合布（1）的测试方法（以下称粘合布） 注（1）所谓的辅料布， 就是作为服装中辅料使用的针织物、梭织物、蕾丝、无纺布、氨基甲酸乙酯泡沫质地等制作的粘合辅料。

Testing methods for laminated fabrics