X85 制烟综合 标准查询与下载

YC/T 148-2002 卷烟、学茄烟 基本计量单位

本标准规定了卷烟、雪茄烟的基本计量单位。 本标准适用于烟草行业卷烟、雪茄烟的生产、经营、科研、统计和管理等领域。

Cigarettes and cigars----Basic metric units

ASTM E2187-02a 卷烟点燃强度测量的标准试验方法

1.1 This fire-test-response standard provides a standard measure of the capability of a cigarette, positioned on one of three standard substrates, to generate sufficient heat to continue burning and thus potentially cause ignition of bedding or upholstered furniture.1.2 This method has value as a predictor of the relative propensity of a cigarette to ignite upholstered furnishings.1.3 This method is applicable to cigarettes that burn along the length of a tobacco column.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 This standard measures and describes the response of materials, products, or assemblies to heat under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6.

Standard Test Method for Measuring the Ignition Strength of Cigarettes

ASTM E2187-02 卷烟点燃强度测量的标准试验方法

1.1 This fire-test-response standard provides a standard measure of the capability of a cigarette, positioned on one of three standard substrates, to generate sufficient heat to continue burning and thus potentially cause ignition of bedding or upholstered furniture.1.2 This method has value as a predictor of the relative propensity of a cigarette to ignite upholstered furnishings.1.3 This method is applicable to cigarettes that burn along the length of a tobacco column.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 This standard measures and describes the response of materials, products, or assemblies to heat under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6.

Standard Test Method for Measuring the Ignition Strength of Cigarettes

ASTM E2187-02b 卷烟点燃强度测量的标准试验方法

1.1 This fire-test-response standard provides a standard measure of the capability of a cigarette, positioned on one of three standard substrates, to generate sufficient heat to continue burning and thus potentially cause ignition of bedding or upholstered furniture.1.2 This method has value as a predictor of the relative propensity of a cigarette to ignite upholstered furnishings.1.3 This method is applicable to cigarettes that burn along the length of a tobacco column.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.1.5 This standard measures and describes the response of materials, products, or assemblies to heat under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6.

Standard Test Method for Measuring the Ignition Strength of Cigarettes

NF V37-044*NF ISO 15593:2001 环境烟草烟雾.对可呼吸悬浮颗粒产生影响的评价.紫外线吸收和荧光法测定颗粒物质

Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence.

NF V37-018:2001 烟草.原材料的批量取样.一般原则

Tobacco - Sampling of batches of raw material - General principles.

BS 5202-10:2001 烟草和烟草制品的化学分析方法 有机氯农药残留量的测定（气相色谱法）

This International Standard specifies a method for the gas chromatographic determination of pesticide residues in leaf tobacco, manufactured tobacco and tobacco products. The method is applicable to the determination of the organochlorine pesticides listed in Table 1. The method is particularly recommended for determination of the substances within the detection limits listed in Table 1. NOTE 1 The method has been demonstrated to be free from errors that may arise from interfering peaks on the chromatogram that originate from non-organochlorine pesticide substances, when applied to various styles of leaf tobacco. However, the preceding statement cannot be assumed to apply to all forms and variants of tobacco and tobacco products and care should be taken in the interpretation of any unexpected, apparently positive results. Some analysts advocate the use of mass spectrometric confirmation of the chemical structure of compounds detected by chromatography in such circumstances. NOTE 2 ISO 1750 contains the systematic chemical names and structures corresponding to the common names given in Table 1.

Methods for chemical analysis of tobacco and tobacco products. Determination of organochlorine pesticide residues (gas chromatographic method)

ISO 15593:2001 环境烟草烟气 可吸入悬浮颗粒物的估测 用紫外吸收法和荧光法测定颗粒相物

本标准规定了环境烟草烟气(ETS)对可吸入悬浮颗粒物(RsP)影响率估测的采样和测定方法。

Environmental tobacco smoke - Estimation of its contribution to respirable suspended particles - Determination of particulate matter by ultraviolet absorbance and by fluorescence

BS 6245-1:2001 烟草和烟草制品的取样.原材料取批样的方法(一般原则)

This International Standard specifies the general principles to be applied when sampling batches of raw tobacco in order to assess either — the mean value of one or more of its characteristics, or — the heterogeneity of one or more of its characteristics. NOTE If it is necessary to sample tobacco taken from cigarettes, the procedures listed in 5.1 of ISO 8243:1991 should be used. Manufactured tobacco products, including products intended for sale or distribution, are specifically not included in the scope of this International Standard. This International Standard is applicable to the sampling of batches of raw tobacco of the following types: a) leaf tobacco: 1) flue cured, 2) air cured, 3) sun cured, 4) fire cured; b) pretreated raw tobacco: 1) which has undergone fermentation (in packages not intended for retail or wholesale sales or distribution, in bulk, in chambers), 2) which has been partially or completely stemmed, 3) which is in the form of stems, 4) which is in the form of waste and remnants, 5) which has been reconstituted in the form of strips.

Sampling tobacco and tobacco products - Method of sampling batches of raw material (general principles)

DIN 10371:2001 烟草和烟草制品分析.葡萄糖、果糖和蔗糖含量测定.高效液相色谱法

The document specifies a method for the determination of sugar content in tobacco and tobacco products. The determination is carried out using high performance liquid chromatography.

Analysis of tobacco and tobacco products - Determination of glucose, fructose and sucrose contents - Method using high performance liquid chromatography

DIN 10372:2001 烟草和烟草制品分析.甘油、丙二醇和山梨醇含量测定.高效液相色谱法

The document specifies a method for the determination of humectant content in tobacco and tobacco products. The determination is carried out using high performance liquid chromatography.

Analysis of tobacco and tobacco products - Determination of glycerol, propylene glycol and sorbitol contents - Method using high performance liquid chromatography

DIN ISO 10315:2000 卷烟.烟雾凝聚物中尼古丁含量测定.气相色谱法

Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method (ISO 10315:2000)

DIN ISO 3402:2000 烟草和烟草制品.调节和试验的大气环境

The document specifies the atmosphere for conditioning and testing samples and test pieces of tobacco and tobacco products. This document specifies the atmosphere for conditioning and testing samples and test pieces of tobacco and tobaco products. This document is applicable to tests on tobacco, tobacco products and materials used in the manufacture of tobacco products for which prior conditioning is necessary.#,,#

Tobacco and tobacco products - Atmosphere for conditioning and testing (ISO 3402:1999)

ISO 4389:2000 烟草和烟草制品 有机氯农药残留量的测定 气相色谱法

This International Standard specifies a method for the gas chromatographic determination of pesticide residues in leaf tobacco, manufactured tobacco and tobacco products. The method is applicable to the determination of the organochlorine pesticides listed in Table 1. The method is particularly recommended for determination of the substances within the detection limits listed in Table 1. NOTE 1 The method has been demonstrated to be free from errors that may arise from interfering peaks on the chromatogram that originate from non-organochlorine pesticide substances, when applied to various styles of leaf tobacco. However, the preceding statement cannot be assumed to apply to all forms and variants of tobacco and tobacco products and care should be taken in the interpretation of any unexpected, apparently positive results. Some analysts advocate the use of mass spectrometric confirmation of the chemical structure of compounds detected by chromatography in such circumstances. NOTE 2 ISO 1750 contains the systematic chemical names and structures corresponding to the common names given in Table 1.

Tobacco and tobacco products - Determination of organochlorine pesticide residues - Gas chromatographic method

DIN ISO 3308:2000 卷烟烟雾常规分析仪.定义和标准条件

The document describes the requirements found necessary to be specified in the light of knowledge and experience gained with analytical cigarette-smoking machines. This standard specifies both the smoking parameters and standard conditions to be provided for machine smoking of cigarettes and the requirements of a smoking machine complying with the standard conditions.

Routine analytical cigarette-smoking machine - Definitions and standard conditions (ISO 3308:2000)

ISO 4874:2000 烟草 原材料的批抽样 一般原则

This International Standard specifies the general principles to be applied when sampling batches of raw tobacco in order to assess either — the mean value of one or more of its characteristics, or — the heterogeneity of one or more of its characteristics. NOTE If it is necessary to sample tobacco taken from cigarettes, the procedures listed in 5.1 of ISO 8243:1991 should be used. Manufactured tobacco products, including products intended for sale or distribution, are specifically not included in the scope of this International Standard. This International Standard is applicable to the sampling of batches of raw tobacco of the following types: a) leaf tobacco: 1) flue cured, 2) air cured, 3) sun cured, 4) fire cured; b) pretreated raw tobacco: 1) which has undergone fermentation (in packages not intended for retail or wholesale sales or distribution, in bulk, in chambers), 2) which has been partially or completely stemmed, 3) which is in the form of stems, 4) which is in the form of waste and remnants, 5) which has been reconstituted in the form of strips.

Tobacco - Sampling of batches of raw material - General principles

ISO 10315:2000/Cor 1:2000 卷烟 烟雾冷凝物中烟碱的测定 气相色谱法 技术勘误1

This is Technical Corrigendum 1 to ISO 10315-2000 (Cigarettes — Determination of nicotine in smoke condensates — Gas-chromatographic method)

Cigarettes - Determination of nicotine in smoke condensates - Gas-chromatographic method; Technical Corrigendum 1

BS 5202-12:2000 烟草和烟草制品的化学分析方法.卷烟的烟雾冷凝物中烟碱含量的测定(气相色谱法)

This International Standard specifies a method for the gas-chromatographic determination of nicotine in cigarette smoke condensates. The smoking of cigarettes and the collection of mainstream smoke are normally carried out in accordance with ISO 4387. However, the method specified in this International Standard is also applicable to the determination of nicotine in cigarette smoke condensates obtained by non-standard smoking. NOTE In countries not in a position to use the gas-chromatographic method, reference should be made to ISO 3400 for the determination of total nicotine alkaloids. In such cases, values obtained using the method described in ISO 3400 may be used with the addition of a note in the expression of results.

Methods for chemical analysis of tobacco and tobacco products - Determination of nicotine in smoke condensate of cigarettes (gas-chromatographic method)

BS 5202-14:2000 烟草和烟草产品的化学分析方法.使用卷烟烟雾常规分析器测定总的散粒物和无尼古丁干散粒物

This International Standard specifies methods for the determination of total particulate matter and for the subsequent determination of nicotine-free dry particulate matter present in the smoke from cigarettes generated and collected using a routine analytical smoking machine.

Methods for chemical analysis of tobacco and tobacco products - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine

NF V37-001:2000 卷烟.用烟雾常规分析仪测定总的和无尼古丁的干散粒物质

Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine.