X85 制烟综合 标准查询与下载

BS 5743:2000 烟草和烟草产品.调节处理和试验的大气环境

This International Standard specifies the atmosphere for the conditioning and testing of samples and test pieces of tobacco and tobacco products. It is applicable to tests on tobacco, tobacco products, and materials used in the manufacture of tobacco products for which prior conditioning is necessary. It is not applicable in the case of test methods and test conditions stipulated in other International Standards (see bibliography). NOTE Atmospheres for conditioning and testing for other tobacco products (e.g. cigars, pipe tobacco or snuff tobacco) may differ from those specified in this International Standard. If required separate standards will be drafted.

Tobacco and tobacco products - Atmosphere for conditioning and testing

BS 5202-1:2000 烟草和烟草制品的化学分析方法 不溶于盐酸的硅酸盐残留物的测定

This International Standard specifies a method for the determination of the percentage of hydrochloric-acid-insoluble extraneous silica particles, especially particles of sand, in tobacco (whole leaf, cut tobacco, tobacco scraps and dust) and tobacco products. It is particularly useful to know the proportion of these residues, in the following circumstances: — when buying tobacco leaves, in order to check the cleanness; — before processing tobacco and tobacco products.

Methods for chemical analysis of tobacco and tobacco products. Determination of silicated residues insoluble in hydrochloric acid

NF V37-011:2000 卷烟.烟雾凝聚物中水分的测定.第1部分:气相色谱法

Cigarettes - Determination of water in smoke condensates - Part 1 : gas-chromatographic method.

ISO 3308:2000 常规分析卷烟吸烟机 定义和标准条件

This International Standard — defines smoking parameters and specifies the standard conditions to be provided for the routine analytical machine smoking of cigarettes; — specifies the requirements for a routine analytical smoking machine complying with the standard conditions. Annex A specifies the ambient air velocities surrounding cigarettes in a routine analytical smoking machine, the mechanical design of the enclosures immediately surrounding them, and the methods of air velocity measurement including the location where air velocity is measured. Annex B describes, as an example, the special characteristics of a typical smoking machine incorporating a piston type of puffing mechanism. Annex C includes a diagram of a puff profile and illustrates definitions and standard conditions.

Routine analytical cigarette-smoking machine - Definitions and standard conditions

ISO 4387:2000 卷烟 用常规分析吸烟机测定总散粒物和无烟碱干散粒物

This International Standard specifies methods for the determination of total participate matter and for the subsequent determination of nicotine-free dry particulate matter present in the smoke from cigarettes generated and collected using a routine analytical smoking machine.

Cigarettes - Determination of total and nicotine-free dry particulate matter using a routine analytical smoking machine

BS 5202-13:2000 烟草和烟草产品的化学分析方法.卷烟烟雾冷凝物中水的测定(气相色谱法)

This part of ISO 10362 specifies a method for the gas-chromatographic determination of water in cigarette smoke condensates. The smoking of cigarettes and collection of mainstream smoke are normally carried out in accordance with ISO 4387. However, the method of this part of ISO 10362 is applicable to the determination of water in smoke condensates obtained by non-standard smoking. NOTE In countries not in a position to use the gas-chromatographic method, the determination of water in smoke condensates should be performed by a Karl Fischer method (ISO 10362-2). In such cases, values obtained for water in smoke condensate may be used with the addition of a note made in the expression of the results.

Methods for chemical analysis of tobacco and tobacco products - Determination of water in smoke condensate of cigarettes (gas chromatographic method)

ISO 3402:1999 烟草和烟草制品 调节和试验用大气

This International Standard specifies the atmosphere for the conditioning and testing of samples and test pieces of tobacco and tobacco products. It is applicable to tests on tobacco, tobacco products, and materials used in the manufacture of tobacco products for which prior conditioning is necessary. It is not applicable in the case of test methods and test conditions stipulated in other International Standards (see bibliography). NOTE Atmospheres for conditioning and testing for other tobacco products (e.g. cigars, pipe tobacco or snuff tobacco) may differ from those specified in this International Standard. If required separate standards will be drafted.

Tobacco and tobacco products - Atmosphere for conditioning and testing

NF V37-034*NF ISO 2817:1999 烟草和烟草制品.溶于盐酸的硅含量的测定

Tobacco and tobacco products - Determination of silicated residues insoluble in hydrochloric acid.

ISO 6565:1999 烟草和烟草制品.卷烟的耐拉性和过滤咀的耐压性.标准条件和测量

Tobacco and tobacco products - Draw resistance of cigarettes and pressure drop of filter rods - Standard conditions and measurement

ISO 2817:1999 烟草和烟草制品 溶于盐酸的硅含量的测定

This International Standard specifies a method for the determination of the percentage of hydrochloric-acid-insoluble extraneous silica particles, especially particles of sand, in tobacco (whole leaf, cut tobacco, tobacco scraps and dust) and tobacco products. It is particularly useful to know the proportion of these residues, in the following circumstances: — when buying tobacco leaves, in order to check the cleanness; — before processing tobacco and tobacco products.

Tobacco and tobacco products - Determination of silicated residues insoluble in hydrochloric acid

NF V37-004:1998 烟草.水含量的测定.第1部分:卡尔.费歇尔( Karl Fischer)方法

Tobacco. Determination of water content. Part 1 : Karl Fischer method.

NF V37-012:1998 卷烟和过滤咀.标称直径的测定.使用激光束测量仪法

Cigarettes and filter rods. Determination of nominal diameter. Method using ? laser beam measuring apparatus

ISO 2971:1998 卷烟和过滤嘴 公称直径的测定 使用激光束测量仪的方法

This International Standard specifies a non-contact, scanning laser beam method of gauging for determination of the mean, minimum and maximum diameters and the ovality of rod-shaped objects with a circular or oval cross-section. The method is applicable, in particular, to cigarettes and filter rods. NOTE 1 Alternative tape gauge and pneumatic balancing orifice measurement techniques are still widely used in the determination of nominal diameters for cigarettes and filter rods. These alternative measurement techniques are discussed in annex C. NOTE 2 For laboratories using the circumference value instead of the diameter, the circumference value is calculated by multiplying the diameter by pi (π).

Cigarettes and filter rods - Determination of nominal diameter - Method using a laser beam measuring apparatus

NF V37-017:1998 烟草.有机氯杀虫剂残留的测定.气相色谱法

Tobacco. Determination of organochlorine pesticide residues. Gas chromatographic method.

YC/T 145.3-1998 烟用香精.折光指数的测定

本标准规定了测定烟用香精折光指数的方法。 本标准适用于烟用香精。

Tobacco flavor.Determination of relative index

YC/T 137.1-1998 复烤片烟包装 瓦楞纸箱包装

Re-roasted tobacco packaging Corrugated box packaging

YC/T 145.4-1998 烟用香精.乙醇中溶混度的评估

本标准规定了评估烟用香精在已知乙醇含量的水溶液中溶混度的方法。 本标准适用于25C时、对烟用香精在乙醇中的溶混度进行评估。

Tobacco flavor.Evaluation of miscibility in ethanol

NF V37-010:1998 作卷烟纸用的材料,过滤纸和过滤嘴接缝纸材料,包括定向可透气部分用的材料.透气性的测定

Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone. Determination of air permeability.

NF V37-015-2*NF ISO 3550-2:1997 卷烟.烟草端损失的测定.第2部分:使用旋转立方盒法(sysmelatophore)

Cigarettes. Determination of loss of tobacco from the ends. Part 2 : method using a rotating cubic box (sysmelatophore).

ISO 6488-1:1997 烟草 水含量的测定 第1部分:卡尔·费休法

Tobacco - Determination of water content - Part 1: Karl Fischer method