共找到 469 条与 钟表 相关的标准,共 32 页
本标准规定了钟用黄铜线(以下简称“黄铜线”)的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制造钟表零件黄铜线,仪器仪表等日用机械行业亦可参照使用。
Brass wire stocks for clocks
本标准规定了钟用钢棒与钢丝(以下简称钢棒、丝)的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制造钟表零件用钢棒、丝,仪器仪表等日用机械行业亦可参照使用。
Steel bars and wires for clocks
本标准规定了钟表用铅黄铜棒与线(以下简称棒、线)的分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制造钟表零件用铅黄铜棒与线,仪器仪表等日用机械行业亦可参照使用。
Lead brass bars and wire stocks for watches and clocks
本标准规定了公共用石英大钟(以下简称“大钟”)的分类、要求、试验方法、检验规则和标志、包装、运输、贮存、安装。 本标准适用于以石英晶体振荡器频率为时间基准,应用于公共场所,分针回转直径不小于0.4m的指针式大钟和显示时间部分最大字高不小于70 mm的数字式大钟。石英大钟的机芯亦可参照使用。
Quartz clocks for public use
이 규격은 손목시계 및 회중시계의 시, 분, 초침에 대한 조립 지름에 대해 규정한다.
Wrist and pocket watches-Fitting diameters for hour, minute and second hands
이 규격은 시계산업에서 사용되고 있는 중요한 기술적이고 상업적인 용어에 대해서 규정한다.
Horological vocabulary-Part 2:Technical and commercial definitions
이 규격은 개별적으로 로트 단위에 의해 수정 진동자 휴대용 시계의 정확도를 평가하는 절차와
Horology-Procedure for evaluating the accuracy of quartz watches
이 규격은 금 합금 피막의 내마모성의 정도를 결정하기 위하여 마모에 적용되는 두 가지 방법
Watch cases and accessories-Gold alloy coverings-Part 3:Abrasion resistance tests of a type of coating on standard gauges
이 규격은 시계 산업에서 사용되고 있는 원론적이고 기술적이며 과학적인 용어에 대해서 규정한
Horological vocabulary-Part 1:Technical and scientific definitions
이 규격은 시계에 부착된 방사능 발광 부착물에 수행되어야 할 검사의 조건에 대하여 규정한다
Timekeeping instruments-Conditions for carrying out checks on radioluminescent deposits
이 규격은 금 합금 피막의 일반적인 요구 조건에 대하여 규정한다. 이것은 휴대용 시계의 케
Watch-cases and accessories-Gold alloy coverings-Part 1:General requirements
Deals with the safety of electric clocks having a rated voltage of not more than 250 V. Examples of appliances that are within the scope of this standard are alarm clocks, spring-driven clocks with an electrically operated winding mechanism, clocks incor
Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks
This International Standard specifies the test methods of various aspects of the photoluminescenl deposits applied to time-measuring instruments, together with the requirements related to them.
Time-measuring instruments - Photoluminescent deposits - Test methods and requirements
本标准规定了以金属材质为原材料的手表壳部件的技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于一般用途的金属表壳。不适用于潜水表等其他特殊用途的表壳,非金属材质表壳亦可参照使用。
Wristwatch cases
本标准规定了家用微波炉使用的电动机式定时器的产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以微型同步电机为动力源,触点额定值在15A以下的家用微波炉上使用的电动机式定时器。
Motor-timer for household microwave oven
本标准规定了机械手表(以下简称手表)的定义、产品分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于使用叉瓦式擒纵调速器的各类手表,相应的手表机心亦可参照使用。
Mechanical watches
This International Standard specifies the test methods of various aspects of the photoluminescenl deposits applied to time-measuring instruments, together with the requirements related to them.
Time-measuring instruments - Photoluminescent deposits - Test methods and requirements
この規格は,定格電圧が250V以下の亀気式クロックの安全性について規定する。
Household and similar electrical appliances -- Safety -- Part 2-26: Particular requirements for clocks
Horology - Test methods for leather and non-metallic bracelets for watches.
이 규격은 기계식과 전자 기계식 시계 무브먼트의 형식과 맞춤 치수에 대하여 규정한다.
Timekeeping instruments-Movements-Types, dimensions and nomenclature
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号