共找到 469 条与 钟表 相关的标准,共 32 页
本标准规定了机械摆钟的产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于以机械能为原动力的机械摆钟(以下称“摆钟”)。
mechanical pendulum clock
本标准规定了机械闹钟的产品分类、技术要求、试验方法、检验规则及标志、包装、运抽、贮存。 本标准适用于能够在预定时间发出闹声的以发条为动力源,具有摆轮游丝振荡系统的机械闹钟。
mechanical alarm clock
The standard contains dimensions of gaskets for round mineral glasses for watches.
Round glasses for watches; mineral glasses; I-gasket, dimensions
Horology. Method for the inspection of the quality of movements for quartz watches.
Horology. Method for the inspection of the quality of quartz watches.
Specification for safety of household and similar electrical appliances. Particular requirements. Clocks
本标准规定了电钟的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于室内以指示时间为主要用途,用交流电源驱动同步电动机的钟〔电钟)。也适用于带有定时等附加装置的电钟。
electric clock
本标准规定了指针式石英钟转子磁钢(以下简称“磁钢”)的尺寸系列、技术要求、试骏方法、检验规则和标志、包装、运输、贮存等要求。 本标准适用于指针式石英钟单相永磁步进电动机用一对极径向充磁转子磁钢。
Rotor Magnets for Analog Quartz Clocks
本标准规定了指针式石英钟用单相永磁步进电动机(以下简称“电机”)的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于指针式石英钟用电机的制造和检验。
Single-phase permanent magnet stepping motor for analog quartz clock
本标准规定了指针式石英表转子磁俐(以下简称“磁钢”)的尺寸系列、技术要求、试验方法、检验规则、标志、包装、运输及贮存等要求。 本标准适用于指针式石英表单相永磁步进电动机用一对极径向充磁转子磁钢。
Rotor Magnets for Analog Quartz Watches
本标准规定了钟针轴与孔的尺寸系列及配合。 本标准适用于普通机械钟及电子钟等。
Clock hands with size series
本标准规定了显示式世界钟的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于以石英振荡器频率为标准,用显示器来表示除本地区的标准时间外,还能表示出世界上其他时区或地区(城市)的相对应的时间装置(以下简称“世界钟”)。
display world clock
Horlogerie - Cahier des charges pour l'épreuve d'étanchéité à l'eau des boîtes de montres
Horlogerie - Méthode de contrôle des montres de plongée
Horology. Method of testing water-resistant watches.
Specifies the designation, requirements, test methods and marking for such watches with or without an additional indication of an overpressure. Watertight means intended for ordinary daily use during exercises under water for a short period under conditions where water pressure and temperature vary. Does not apply to diver's watches (on this see ISO 6425).
Horology; water-resistant watches
Quartz clocks; alarm clocks; requirements, testing
This standard applies to watches. It contains a nomenclature of watch parts for better lingual understanding in the field of watch manufacturing.
Watches; nomenclature of watch parts
The standard contains a selection of graphical symbols. They are used to mark the operations on clocks, preferably on alarm-clocks.#,,#
Graphical symbols for clocks
This standard refers to hairsprings which are used in mechanical watches and clocks.
Hairsprings for watches and clocks; code-numbers
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号