Y30 造纸综合 标准查询与下载

DIN ISO 5630-5:2017 纸和纸板.加速老化.第5部分:暴露于升温至100℃的条件下(ISO 5630-5-2008)

Paper and board - Accelerated ageing - Part 5: Exposure to elevated temperature at 100 °C (ISO 5630-5:2008)

DIN ISO 5630-6:2017 纸和纸板.加速老化.第6部分:暴露于空气污染的条件下(二氧化氮)(ISO 5630-6-2009)

Paper and board - Accelerated ageing - Part 6: Exposure to atmospheric pollution (nitrogen dioxide) (ISO 5630-6:2009)

DIN EN ISO 12625-4:2017 薄纸和薄纸制品.第4部分:抗拉强度,最大力量拉伸和抗拉能量吸收(ISO 12625-4-2016);德文版本EN ISO 12625-4-2016

Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2016); German version EN ISO 12625-4:2016

DIN EN ISO 12625-5:2017 薄纸和薄纸制品.第5部分:湿抗拉强度的测定(ISO 12625-5-2016);德文版本EN ISO 12625-5-2016

Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016); German version EN ISO 12625-5:2016

DIN ISO 5630-7:2017 纸和纸板.加速老化.第7部分:曝光(ISO 5630-7-2014)

Paper and board - Accelerated ageing - Part 7: Exposure to light (ISO 5630-7:2014)

BS EN ISO 12625-5:2016 薄纸和薄纸制品.湿拉伸强度的测定

Tissue paper and tissue products. Determination of wet tensile strength

BS EN ISO 12625-4:2016 薄纸和薄纸制品.拉伸强度、最大力拉伸和拉伸能量吸收的测定

Tissue paper and tissue products. Determination of tensile strength, stretch at maximum force and tensile energy absorption

BS EN ISO 12625-6:2016 薄纸和薄纸产品 克重的测定

Tissue paper and tissue products. Determination of grammage

ASTM D685-17 试验用纸张和纸制品修整的标准实施规程

3.1 The preconditioning requirement is important because physical properties of a sample at 508201;% relative humidity depend upon whether the sample is brought to 508201;% from a higher or lower relative humidity. A detailed discussion of the importance of preconditioning may be found in Annex A1. 3.2 The conditioning and testing atmospheres are important because both temperature and relative humidity have significant effects on the physical properties of paper and board. A more detailed discussion of the importance may be found in Annex A2. 3.3 This standard is technically identical to TAPPI T-402. 1.1 This practice defines the standard atmospheres for normal preconditioning, conditioning, and testing of paper and paper products, paperboard, fiberboard, and containers made from them. It also specifies procedures for handling these materials in order that they may reach equilibrium with the respective atmosphere. 1.2 This practice does not include special conditioning and testing atmospheres, such as those that attempt to simulate tropical or arctic environments. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Conditioning Paper and Paper Products for Testing

ASTM D689-17 纸张内部抗撕裂的标准试验方法

4.1 This test method is widely used within the paper industry, in conjunction with other tests of strength, as a predictor of end-use performance of a wide range of grades of papers. 1.1 This test method measures the force perpendicular to the plane of the paper required to tear multiple sheets of paper through a specified distance after the tear has been started, using an Elmendorf-type tearing tester. The measured results can be used to calculate the approximate tearing resistance of a single sheet. In the case of tearing a single sheet of paper, the tearing resistance is measured directly. Note 1: Similar procedures for making Elmendorf-type tear measurements are found in ISO 1974 and TAPPI T414. 1.2 This test method is not suitable for determining the cross-directional tearing resistance of highly directional boards and papers. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Internal Tearing Resistance of Paper

ISO 12625-6:2016 薄纸和薄纸制品. 第6部分: 克数的测定

Tissue paper and tissue products - Part 6: Determination of grammage

ISO 12625-4:2016 薄纸和薄纸制品. 第4部分: 抗拉强度, 最大力量拉伸和抗拉能量吸收

Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption

ISO 12625-5:2016 薄纸和薄纸制品. 第5部分: 湿抗拉强度的测定

Tissue paper and tissue products - Part 5: Determination of wet tensile strength

DIN EN ISO 8254-2:2016 纸和纸板.光泽度测量.第2部分:75°平行光束,DIN法(ISO 8254-2-2016).德文版本EN ISO 8254-2-2016

Paper and board - Measurement of specular gloss - Part 2: 75° gloss with a parallel beam, DIN method (ISO 8254-2:2016); German version EN ISO 8254-2:2016

NF Q03-105*NF ISO 11476:2016 纸和纸板.CIE白度的测定,C/2°(室内照明条件).

Paper and board - Determination of CIE whiteness, C/2o (indoor illumination conditions)

BS ISO 2470-1:2016 纸、纸板和纸浆 蓝色漫反射系数的测量 室内日光条件（ISO 亮度）

Paper, board and pulps. Measurement of diffuse blue reflectance factor. Indoor daylight conditions (ISO brightness)

ISO 2470-1:2016 纸,纸板和纸浆.蓝光漫反射因数.第1部分:室内日光条件(ISO辉度)

Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)

BS ISO 11476:2016 纸和纸板.CIE-白度的测定,C/2°(室内照明条件)

Paper and board. Determination of CIE whiteness, C/2 (indoor illumination conditions)

BS EN ISO 8254-2:2016 纸和纸板.光泽度的测量.用平行光束的75度,DIN法

Paper and board. Measurement of specular gloss. 75 degree gloss with a parallel beam, DIN method

BS ISO 9197:2016 纸、纸板和纸浆 水溶性氯化物的测定

Paper, board and pulps. Determination of water-soluble chlorides