Y31 纸浆与纸板 标准查询与下载

ISO 5636-3:1992 纸和纸板 透气性的测定(中等范围) 第3部分:本特生(Bendtsen)法

The method determines air permeance in the medium range. It is applicable to papers and boards having air permeance between 0,35 鎚/(Pa鷖) und 15 鎚/(Pa鷖). It is unsuitable for rough surfaced papers and boards, such as creped and corrugated papers, which cannot be securely clamped to avoid leakage. Annex A considers maintenance of Bendtsen testers, Annex B calibration of capillary tubes and variable area flowmeters.

Paper and board; determination of air permeance (medium range); part 3: Bendtsen method

QB/T 1457-1992 纱管纸板

本标准规定了纱管纸板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制造粗纱管、化纤纱管及其他类似用途的纸芯管用的纱管纸板。

bobbin cardboard

QB/T 1463-1992 纸浆实验室打浆PFI磨法

本标准规定了采用PFI磨进行实验室打浆的方法。 本标准原则上适用于各种浆种，但在实际使用中对于某些纤维特别长的浆种，如棉短绒浆，效果可能不佳。

Pulp lab beating PFI grinding method

QB/T 1462-1992 纸浆实验室的湿解离

本标准规定了用纤维标准解离器解离纸浆的一个方法。但本标准规定不能作为实验室Valley打浆的初步解离作用。 本标准适用于大多数纸浆。 本标准不适用于未经切断的棉浆、亚麻和类似的纸浆。

Wet dissociation in the pulp laboratory

ISO 5634:1986/Cor 1:1992 纸和纸板.耐油脂性的测定.技术勘误表1

Paper and board; determination of grease resistance; technical corrigendum 1

DIN 55437-1:1992 纸板检验.折皱检验.折皱试样的试验室的制备

The standard specifies the laboratory producing of test creasings of board.

Testing of board; testing of creasings; laboratory producing of test creasings

DIN 55437-2:1992 纸板检验.折皱检验.通过对折皱目测评定来测定折皱范围

The standard specifies the determination of creasing range by visual assessment of creasings of board.

Testing of board; testing of creasings; determination of creasing range by visual assessment of creasings

DIN 55437-3:1992 纸板检验.折皱.折皱机械特性的测定

The standard specifies the determination of the mechanical properties of creasings of board.

Testing of board; creasings; determination of the mechanical properties of creasings

QB/T 1317-1991 手风琴风箱纸板

本标准规定了手风琴风箱纸板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于供制作手风琴风箱之纸板。

Accordion Bellows Cardboard

QB/T 1316-1991 封套纸板

本标准规定了封套纸板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于供制做精装著作、画册等封套用之纸板。

envelope cardboard

QB/T 1315-1991 厚纸板

本标准规定了厚纸板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于做特种纸盒及纸箱内隔栅用之厚纸板。

thick cardboard

QB/T 1314-1991 标准纸板

本标准规定了标准纸板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制做精确的特殊模压制品以及重要制品的包装之纸板。

Standard cardboard

QB/T 1318-1991 探测器盒纸板（雷达纸板）

本标准规定了探测器盒纸板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于供制造无线电、气象探测仪纸盒用的纸板。

Detector box cardboard (radar cardboard)

QB/T 1011-1991 单面涂布白纸板

本标准规定了单面涂布白纸板的技术规范。 本标准适用于单面彩色印刷和制盒包装用的单面涂布白纸板。

Single side coated white paperboard

ISO 5350-2:1990 纸浆.污垢和碎片.第2部分:漂白纸浆

Pulps; estimation of dirt and shives; part 2: bleached pulp

ASTM D3344-90(2010) 波纹面的纸板的总载蜡量的标准试验方法

Many of the functional properties of wax-treated corrugated paperboard and cartons are dependent on the amount of wax present. In the case of wax-saturated, or wax-impregnated, paperboard the principal concern is with the weight of wax used relative to the weight of paperboard present, that is, the weight percent content or pickup. In some applications the saturating wax may be deposited in the three elements of the corrugated board in such a way as to individually control the amount in each element, that is, the medium and the two facings. In the case of wax-coated corrugated paperboard the principal concern is the weight of wax on the board surface per unit area. The functional values of the wax coating as a barrier or a decorative coating are dependent, in part, on the amount of wax in the continuous surface layer, relative to the area covered. The weight of coating relative to the weight of substrate is not usually a concern with regard to product quality.1.1 This test method covers the determination of the weight of wax that is present in a specimen of wax-treated corrugated paperboard. The test method is applicable to specimens that have been waxed by either impregnation (saturation) operations or coating operations, or combinations of such operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For precautionary statement, see 5.4 and 7.2.

Standard Test Method for Total Wax Content of Corrugated Paperboard

QB/T 3504-1999 铸涂白纸板

本标准规定了铸涂白纸板的技术规范。 本标准适用于以白纸板为原纸铸涂加工的铸涂纸板，主要适用于印刷商品的中高档包装盒 本标准不适用于以不同定量的纸或卡纸为原纸铸涂加工的铸涂纸。

Cast coated white paperboard

ASTM D2929-89(2011) 用X射线荧光法对纤维素材料中硫含量的标准试验方法

This procedure provides a method for determining sulfur content in cellulosic materials by nondestructive means. Sulfur may be in the form of sulfate esters that may contribute to thermal instability. Sulfur can also be present as salts that can cause haze in solutions.1.1 This test method covers determination of sulfur content of cellulosic materials by X-ray fluorescence. 1.2 Using appropriate standards, the range of the procedure is from approximately 10 ppm to 20 % sulfur. 1.3 This test method is proposed specifically as an alternative to Test Methods D871, sections on Significance and Use, Apparatus, Reagents, Procedure and Calculation of Hydroxyl Content, and Test Methods D817, sections on Summary of Test Method, Significance and Use, Apparatus, Reagents, and Procedure of Hydroxyl Content. As applied to cellulose esters it measures the combined sulfur and sulfur in the accompanying inorganic salts. 1.4 To determine combined sulfur, the sample, when soluble, must first be reprecipitated into dilute acid to remove the noncombined sulfur compounds. 1.5 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see 7.2.1.

Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence

BS 6965-1:1988 硬纸板的折缝性能.折叠90°的折缝恢复(回弹)测定方法

Method of test for determining the decrease/increase in stiffness (spring back) after folding.

Creasing properties of carton board - Method for determination of crease recovery (spring back) of 90 ° fold

NF T12-007:1987 纸浆.高锰酸盐数值的测定

Pulps. Determination of the permanganate number.