Y44 其他日用化工品 标准查询与下载

ASTM D3210-95(2008) 水乳化地板抛光剂膜的颜色比较的标准试验方法

Whiteness index obtained from reflectance measurements on exaggerated dried polish films on filter paper can be used as a measurement of the color of such films. Whiteness index may be useful in predicting the potential discoloring effect of polish films on flooring substrates. Whiteness index should be useful in specifications when color comparisons are made with a standard sample polish.1.1 This test method covers comparing colors of films (or solids) deposited from the emulsified particles in water emulsion floor polishes. It is based upon luminous reflectance measurements made with tristimulus colorimeters such as the Hunter Color Difference Meter. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes

ASTM D3430-95(2008) 液态水基透明地板抛光剂的透明度及泛黄度的标准试验方法

The laboratory technique described in this test method is used to evaluate the clarity and yellowness of water-based “clear” floor polishes for product development or quality control purposes.1.1 This test method covers measurement of the degree of clarity and depth of yellowness of water-based clear floor polishes. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes

ASTM D3564-95(2008) 保养乙烯合成瓦或地板用地板抛光剂的标准实施规程

Vinyl composition tile or flooring consists of vinyl resins (suitably plasticized and stabilized) fortified with composition fibers, mineral fillers, and prime pigments. In some cases, all or part of the wearing surfaces may consist of unfilled vinyl resin that is clear or translucent. Metallic accents (chips, pigment, etc.) are frequently used to form the overall design. In general, the overall binder content is lower than that of homogeneous vinyl tile. For the purpose of this practice, vinyl composition also includes vinyl asbestos tile.1.1 This practice covers the application of floor polishes to maintain vinyl composition tile or flooring. Floor polishes are applied to vinyl composition tile floors for protection and beautification of the floor surface. Cleaning, polish application, removal, and maintenance procedures are important functions in this process. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring

ASTM D4386-95(2008) 多种地板和瓦的地板抛光物的应用的标准实施规程

Multilayer composite tile or flooring may consist of a decorative pattern layer and a transparent wear layer. Some floors may also include a stress absorbing foam layer or a backing layer of other type. Included in the composition are vinyl resins, suitably plasticized and stabilized, with or without fortifying fibers, mineral fillers and prime pigments. Metallic accents (chips, pigments, etc.) are frequently used to form the overall design. The transparent wear coating is usually polyurethane, acrylic or vinyl. Although the transparent wear layer provides an extra measure of protection, the surface is subject to the same wear and tear as other types of floors.1.1 This practice covers the application of floor polishes to maintain multilayer composite tile or flooring. Floor polishes are applied to multilayer composite floors for protection and beautification of the floor surface. Cleaning, polish application, removal, and maintenance procedures are important functions in this process. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring

ASTM D5678-95(2008) 乳化地板蜡耐冷冻/解冻的标准试验方法

This test method is used to determine the effect of freezing on wax emulsion floor polishes. It may be used to predict the stability of a floor polish in transit or when exposed to freezing, and whether or not the polish is damaged by freezing.1.1 This test method covers the determination of the stability of wax emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

ASTM D4330-94(2008) 玻璃纤维船上光漆和蜡的评定标准实施规程

Boat polish or wax aids in cleaning and maintaining the surface of fiberglass boats. The function of cleaning is very important. This practice defines the properties to be tested, the apparatus to use, and the comparisons of product performance. It is recognized that considerable discretion exists among formulators and marketers of boat polish on what properties or performance characteristics are best for their products. This practice is flexible to honor this fact. The methods of testing are subjective and empirical in order to conform to the basic characteristics of the industry and to allow flexibility in testing. Although test panels may be used for screening purposes, actual boat surfaces should be used for the final evaluation.1.1 This practice covers the properties to test and the apparatus to use when evaluating the performance of boat polishes and waxes, in terms of ease of application, cleaning efficiency, gloss and improvement of aesthetic appearance. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Evaluation of Fiberglass Boat Polish and Wax

ASTM D3751-94(2002) 家具抛光剂评定的标准实施规范

This practice defines the properties to be tested, the apparatus to be used, and the comparisons of product performance. It is recognized that considerable discretion exists among formulators and marketers of furniture polish on which properties or performance characteristics are best for their products. This practice will be flexible to honor this fact within the confines of the furniture polish definition below. The methods of testing are subjective and empirical in order to conform to the basic characteristics of the industry and to allow flexibility in testing.1.1 This practice covers the definition of properties to test and the apparatus to use in evaluating the performance of furniture polishes. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Evaluation of Furniture Polish

CGSB 25.6-94-CAN/CGSB-1994 金属抛光剂

Metal Polish

Metal Polish

QB 1692.4-1993 家用卫生杀虫用品 卫生香

本标准规定了卫生香的术语、产品分类、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于香精和植物粉末制成，点燃后产生气体，用于改善室内环境空气的产品。

Household sanitation insecticide sanitation incense

BOCA CHAPTER 17 NFPC-1993 火柴

The following is a listing of the standards referenced in this code, the effective date of the standard, the promulgating agency of the standard and the section(s) of this code that refer to the standard.

Matches

BOCA CHAPTER 17 NFPC COMM-1993 火柴

A person shall not willfully fail or refuse to comply with any lawful order or direction of the fire prevention code officiai or to interfere with the compliance attempts of another individual.

Matches

BOCA CHAPTER 31 NFPC-1993 烟花爆竹

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Fireworks

BOCA CHAPTER 40 NFPC COMM-1993 发火材料

The format and provisions of The BOCA National Propero Maintenance Code are designed to provide units of government with an effective regulatory means of providing minimum health and safety requirements for existing buildings and structures.

Pyrophoric Materials

BOCA CHAPTER 31 NFPC COMM-1993 烟花爆竹

The BOCA National Mechanical Code was initially prepared and updated on the premise that adequate code requirements are essential to the safe installation and maintenance of all mechanical equipment and systems in order to protect the public health, sa

Fireworks

BOCA CHAPTER 40 NFPC-1993 发火材料

This eleventh edition presents the code as originally issued, with changes approved through 1989, and with certain editorial changes made to maintain the sequence of the code, to standardize the format of all 1990 BOCA National Codes, and to update the

Pyrophoric Materials

ASTM D1791-93(2008) 液态水乳化地板擦亮剂加速老化的标准试验方法

This test method is not absolute but does give an indication of the useful shelf-life of a liquid water-emulsion floor polish. Will indicate whether a polish will gel or remain a usable liquid over the desired storage life of the product. It should be noted that polishes of different composition types will vary in useful storage life under identical storage conditions.1.1 This test method covers the storage stability of liquid water-emulsion floor polishes. 1.2 Storage for 30 days at 52°C (125°F), while not a guarantee of one year stability at 21°C (70°F), is believed to be a more reliable indicator of storage stability than similar tests of shorter duration. Note 18212;The 60° specular gloss on black glass determined by Test Method D 1455, may be used to confirm this observation. A substantial difference in gloss between aged and unaged samples is an indication of instability. A shelf stability of one year can be reasonably expected of the material in question if duplicate samples remain unchanged for 30 days at 52 ± 1.1°C (125 ± 2°F). If one or both duplicates show more than slight viscosity increases or slight creaming, other evidence of stability must be sought. 1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

ASTM D3209-93(2008) 液态水乳化地板擦亮剂的耐冻结/融化的标准试验方法

This test method is used to determine the effect of freezing on floor polishes. It may be used to predict the stability of a floor polish when exposed to freezing.1.1 This test method covers the determination of the stability of polymer emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

ASTM D3209-93(2004) 聚合物地板抛光剂的耐冻结/融化的标准试验方法

This test method is used to determine the effect of freezing on floor polishes. It may be used to predict the stability of a floor polish when exposed to freezing.1.1 This test method covers the determination of the stability of polymer emulsion floor polishes when these are exposed to repeated cycles of freezing and thawing. Possible degradation of the emulsion is observed and possible reduction of initial gloss is measured.1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

JIS K 3901:1992 鞋油

この規格は，天然の皮をなめしたつやのある革を甲用材料とした一般歩行用の革ぐつに用いるくつクリーム(以下，くつクリームという。)について規定する。

Shoe polish

ASTM D1793-92(2002) 地板擦亮乳剂水斑的测试方法

This test method measures the ability of a floor polish to resist spotting by water. This test method may be used to measure the extent of damage by a large amount of water or in a separate method to measure the amount of damage by a small amount of water that has evaporated to dryness. Reference polishes should be used for comparison. Note 18212;The test method may induce slight whitening, color change, noticeable change in appearance, including removal of the film, which is caused by contact with water.1.1 This test method covers the determination of water spotting resistance of water emulsion floor polishes. The test method approximates the actual conditions of water spotting encountered in service. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Water Spotting of Emulsion Floor Polishes