Y46 毛皮、皮革 标准查询与下载
共找到 695 条与 毛皮、皮革 相关的标准，共 47 页
This part of ISO 17226 specifies a method for determining the emission of formaldehyde from leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and also allows the emission of other low molecular aldehydes and ketones to be observed. This part of ISO 17226 deals with the release of formaldehyde to the gas phase. Therefore, the obtained results are not comparable with the results of methods described in ISO 17726-1 and ISO 17226-2 which are based on extraction with liquid water.
Leather. Chemical determination of formaldehyde content. Determination of formaldehyde emissions from leather
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06-30
- 实施
- 2011-06-30
This part of ISO 17076 specifies a method of determining the abrasion resistance of upholstery leather for different applications using Martindale apparatus with a ball plate. The method is applicable to semi-aniline, pigmented and coated leather.
Leather. Determination of abrasion resistance. Martindale ball plate method
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06-30
- 实施
- 2011-06-30
本标准规定了皮革、毛皮中游离水解的戊二醛含量的测定方法。 本标准适用于各种皮革、毛皮。
Leather and fur.Chemical tests.Determination of free glutaraldehyde content
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了皮革单边撕裂力的测定方法。 本标准适用于各种类型的皮革。
Leather.Physical and mechanical tests.Determination of tear load: Single edge tear
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了皮革的防霉性能测试方法。 本标准适用于各种半成品革、皮革。
Leather.Test method for antimould
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了水貂毛皮的要求、分级、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于各种水貂毛皮。
Mink fur
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06-15
- 实施
- 2011-10-01
This part of ISO 17234 is supplementary to ISO 17234-1 and describes a special procedure to detect the use of certain azo colorants in commodities, which can release 4-aminoazobenzene. The procedure also detects 4-aminoazobenzene (Solvent Yellow 1) which is already available as free amine in commodities without reducing pretreatment.
Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 2: Determination of 4-aminoazobenzene (ISO 17234-2:2011); German version EN ISO 17234-2:2011
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06
- 实施
This part of ISO 17072 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines the total metal content in leather; it is not compound-specific or specific to the oxidation state of the metals. The method is applicable for determining the following metals: Aluminium (Al) Copper (Cu) Potassium (K) Antimony (Sb) Iron (Fe) Selenium (Se) Arsenic (As) Lead (Pb) Silicon (Si) Barium (Ba) Magnesium (Mg) Sodium (Na) Cadmium (Cd) Manganese (Mn) Tin (Sn) Calcium (Ca) Mercury (Hg) Titanium (Ti) Chromium (Cr) (except chromium-tanned leathers) Molybdenum (Mo) Zinc (Zn) Cobalt (Co) Nickel (Ni) Zirconium (Zr) The quantification limit of total lead is 8 mg/kg (see Annex A). This part of ISO 17072 is not applicable to chromium-tanned leathers. In this case, ISO 5398-1, or ISO 5398-2, or ISO 5398-3, or ISO 5398-4 are used.
Leather - Chemical determination of metal content - Part 2: Total metal content (ISO 17072-2:2011); German version EN ISO 17072-2:2011
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06
- 实施
This part of ISO 17072 specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspiration solution and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP-OES), or inductively coupled plasma/atomic emission spectrometry (ICP/AES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method is especially suitable for determining the extractable chromium in chromium-tanned leathers. This method determines extractable metals in leather; it is not compound-specific or specific to the oxidation state of the metals. The method is also applicable for the determination of many extractable metals, including: Aluminium (Al) Antimony (Sb) Arsenic (As) Barium (Ba) Cadmium (Cd) Calcium (Ca) Chromium (Cr) Cobalt (Co) Copper (Cu) Iron (Fe) Lead (Pb) Magnesium (Mg) Manganese (Mn) Mercury (Hg) Molybdenum (Mo) Nickel (Ni) Potassium (K) Selenium (Se) Tin (Sn) Titanium (Ti) Zinc (Zn) Zirconium (Zr) The quantification limit of extractable lead is 3 mg/kg (see Annex A).
Leather - Chemical determination of metal content - Part 1: Extractable metals (ISO 17072-1:2011); German version EN ISO 17072-1:2011
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-06
- 实施
Leather - Chemical determination of metal content - Part 2 : total metal content.
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-04-01
- 实施
- 2011-04-16
Leather - Chemical determination of metal content - Part 1 : extractable metal.
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-04-01
- 实施
- 2011-04-16
This part of ISO 17234 is supplementary to ISO 17234-1 and describes a special procedure to detect the use of certain azo colorants in commodities, which can release 4-aminoazobenzene. The procedure also detects 4-aminoazobenzene (Solvent Yellow 1) which is already available as free amine in commodities without reducing pretreatment. Azo colorants that are able to form 4-aminoazobenzene generate, under the conditions of ISO 17234-1, the amines aniline and 1,4-phenylenediamine. The presence of these 4-aminoazobenzene colorants cannot be reliably ascertained without additional information (e.g. the chemical structure of the colorant used) or without a special procedure. The use of certain azo colorants, which may release, by reductive cleavage of their azo group(s), one or more of the other aromatic amines listed in Annex XVII of Regulation (EC) No. 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), except 4-aminoazobenzene, cannot be determined quantitatively with this method.
Leather. Chemical tests for the determination of certain azo colorants in dyed leathers. Determination of 4-aminoazobenzene
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Leather. Chemical determination of metal content. Total metal content
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-03-31
- 实施
- 2011-03-31
Leather - Chemical tests - Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography.
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-03-01
- 实施
- 2011-03-16
Leather. Chemical determination of metal content. Extractable metals
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-02-28
- 实施
- 2011-02-28
This part of ISO 17072 specifies a method for the determination of the total metal content in leather using digestion of the leather and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP/OES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method determines the total metal content in leather; it is not compound-specific or specific to the oxidation state of the metals. The method is applicable for determining the following metals: Aluminium (Al) Copper (Cu) Potassium (K) Antimony (Sb) Iron (Fe) Selenium (Se) Arsenic (As) Lead (Pb) Silicon (Si) Barium (Ba) Magnesium (Mg) Sodium (Na) Cadmium (Cd) Manganese (Mn) Tin (Sn) Calcium (Ca) Mercury (Hg) Titanium (Ti) Chromium (Cr) (except chromium-tanned leathers) Molybdenum (Mo) Zinc (Zn) Cobalt (Co) Nickel (Ni) Zirconium (Zr) The quantification limit of total lead is 8 mg/kg (see Annex A). This part of ISO 17072 is not applicable to chromium-tanned leathers. In this case, ISO 5398-1, or ISO 5398-2, or ISO 5398-3, or ISO 5398-4 are used.
Leather - Chemical determination of metal content - Part 2: Total metal content
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-02-15
- 实施
- 2011-02-15
This part of ISO 17072 specifies a method for the determination of extractable metals in leather using extraction with an acid artificial-perspiration solution and subsequent determination with inductively coupled plasma/optical emission spectrometry (ICP-OES), or inductively coupled plasma/atomic emission spectrometry (ICP/AES), or inductively coupled plasma/mass spectrometry (ICP/MS), or atomic absorption spectrometry (AAS) or spectrometry of atomic fluorescence (SFA). This method is especially suitable for determining the extractable chromium in chromium-tanned leathers. This method determines extractable metals in leather; it is not compound-specific or specific to the oxidation state of the metals. The method is also applicable for the determination of many extractable metals, including: Aluminium (Al) Antimony (Sb) Arsenic (As) Barium (Ba) Cadmium (Cd) Calcium (Ca) Chromium (Cr) Cobalt (Co) Copper (Cu) Iron (Fe) Lead (Pb) Magnesium (Mg) Manganese (Mn) Mercury (Hg) Molybdenum (Mo) Nickel (Ni) Potassium (K) Selenium (Se) Tin (Sn) Titanium (Ti) Zinc (Zn) Zirconium (Zr) The quantification limit of extractable lead is 3 mg/kg (see Annex A).
Leather - Chemical determination of metal content - Part 1: Extractable metals
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-02-15
- 实施
- 2011-02-15
Leather. Chemical tests. Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-01-31
- 实施
- 2011-01-31
This International Standard specifies a test method for the determination of the content of the following preservative agents: - 2-(thiocyanomethylthio)-benzothiazole (TCMTB); - 4-chloro-3-methylphenol (PCMC); - 2-phenylphenol (OPP); - 2-octylisothiazol-3(2H)-one (OIT); in leather by liquid chromatography. Preservative agents are necessary to protect leather from microbiological attack. NOTE The preservative agents 4-chloro-3-methylphenol (PCMC) and 2-phenylphenol (OPP) can also be determined according to ISO 17070 and quantified by means of gas chromatography/mass spectroscopy (GC/MS).
Leather. Chemical tests. Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography
- ICS
- 59.140.30
- CCS
- Y46
- 发布
- 2011-01-15
- 实施
- 2011-01-15
