Y46 毛皮、皮革 标准查询与下载

SANS 2418:2009 皮革．化学、物理、机械和色牢度试验．取样位置

Specifies the location of a laboratory sample within a piece of leather and the method of labelling and marking the laboratory samples for future identification. It is applicable to all types of leather derived from mammals irrespective of the tannage

Leather - Chemical, physical and mechanical and fastness tests - Sampling location

NF G52-223:2009 皮革.化学试验.辅助物在制品中游离甲醛测定

Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries.

DIN EN ISO 11643:2009 皮革.色牢度试验,小型溶剂样品的色牢度(ISO 11643:2009),EN ISO 11643:2009的德文版本

This International Standard specifies a method for determining the resistance to solvent solutions of the colour and finish of unused, and not yet cleaned, leather. It does not cover composite materials or complete leather garments. It is not intended to be used to give any guidance on the process to be employed for cleaning garments. During the test, the colour of the leather can change and the adjacent fabric used can become stained. Additionally, the finish of the leather can be damaged. The presence of absorbed water in the leather, adjacent fabric or solvent has not been found to be a critical factor in assessing the colour fastness.

Leather - Tests for colour fastness - Colour fastness of small samples to solvents (ISO 11643:2009); English version of DIN EN ISO 11643:2009-10

ISO 27587:2009 皮革.化学试验.辅助物在制品中游离甲醛测定

Leather - Chemical tests - Determination of the free formaldehyde in process auxiliaries

NF G52-303*NF EN ISO 11643:2009 皮革.色牢度试验.小型溶剂样品的色牢度

Leather - Tests for colour fastness - Colour fastness of small samples to solvants.

SANS 17229:2009 皮革.物理和机械试验.水蒸气吸收率的测定

Specifies a method for determining the water vapour absorption of leather. The method is applicable for all leathers but is particularly relevant for leathers intended for footwear uppers and linings.

Leather - Physical and mechanical tests - Determination of water vapour absorption

SANS 2417:2009 皮革．物理和机械试验．静态吸水性的测定

Specifies a method for determining the water absorption of leather under static conditions. The method is applicable for all leather, particularly heavy leather.

Leather - Physical and mechanical tests - Determination of static absorption of water

SANS 2589:2009 皮革.物理及机械测试.厚度测定

Specifies a method for determining the thickness of leather. The method is applicable to all types of leather of any tannage. The measurement is valid for both the whole leather and a test sample.

Leather - Physical and mechanical tests - Determination of thickness

SANS 17235:2009 皮革.物理和机械试验.软度的测定

Specifies a non destructive method for determining the softness of leather. The method is applicable to all non-rigid leathers e.g. Shoe upper leather, upholstery leather, leathergoods leather and apparel leather.

Leather - Physical and mechanical tests - Determination of softness

SANS 5621:2009 皮革总灰分测定

Specifies a method for the determination of total ash content of leather.

Determination of total ash content of leather

BS EN ISO 17226-1:2008 皮革.甲醛含量的化学测定.第1部分:高效液相色谱法(ISO 17226-1-2008)

This part of ISO 17226 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and not sensitive to coloured extracts. The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted through hydrolysis contained in a water extract from the leather under standard conditions.

Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography (ISO 17226-1:2008)

BS EN ISO 11643:2009 皮革.色牢度试验.小型样品对溶剂的色牢度(ISO 1643-2009)

This International Standard specifies a method for determining the resistance to solvent solutions of the colour and finish of unused, and not yet cleaned, leather. It does not cover composite materials or complete leather garments. It is not intended to be used to give any guidance on the process to be employed for cleaning garments. During the test, the colour of the leather can change and the adjacent fabric used can become stained. Additionally, the finish of the leather can be damaged. The presence of absorbed water in the leather, adjacent fabric or solvent has not been found to be a critical factor in assessing the colour fastness.

Leather - Tests for colour fastness - Colour fastness of small samples to solvents(ISO 1643:2009)

BS EN ISO 17226-2:2008 皮革.甲醛含量的化学法测定.第2部分:比色定量分析方法(ISO 17226-2-2008)

This part of ISO 17226 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on colorimetric analysis. The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted through hydrolysis contained in a water extract from the leather under standard conditions. This process is not absolutely selective for formaldehyde. Other compounds such as extracted dyes could interfere at 412 nm.

Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO 17226-2:2008)

SANS 701:2009 科尔多瓦革及整形外科用科尔多瓦革

Covers genuine cordovan leather made from horsehide and cordovan-type leather made from sheepskins or bovine hides intended for orthopaedic use.

Cordovan and cordovan-type leathers for orthopaedic use

SANS 705:2009 植物鞣马具及僵绳用皮革

Covers vegetable-tanned harness and bridle leathers.

Vegetable-tanned harness and bridle leathers

SANS 702:2009 整形外科用植物鞣鞋面革

Covers vegetable-tanned side leather for orthopaedic use.

Vegetable-tanned side leather for orthopaedic use

NF G52-232:2009 皮革.物理和机械试验.漆皮耐热性的测定

Leather - Physical and mechanical tests - Determination of heat resistance of patent leather.

NF G52-030:2009 皮革.物理和机械试验.用革面皮弯曲法测定抗弯强度

Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method.

DIN EN ISO 17232:2009 皮革 物理和机械试验 漆皮耐热性的测定

This International Standard specifies two methods for determining the heat resistance of patent leather. Method A makes use of a modified lastometer while Method B uses the "Zwik" apparatus. Both methods are applicable to patent leathers for all end uses.

Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2006); English version of DIN EN ISO 17232:2009-04

ISO 17226-2:2008/cor 1:2009 皮革.甲醛含量的化学测定.第2部分:使用比色分析法.技术勘误1

Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis; Technical Corrigendum 1