Y46 毛皮、皮革 标准查询与下载

ISO 17231:2006 皮革.物理和机械试验.服饰皮革的拒水性测定

This International Standard specifies a method for determining the repellency of leather to surface wetting. It is applicable to all leathers intended for use in clothing. The method does not determine the resistance of leather to water penetration.

Leather - Physical and mechanical tests - Determination of water repellency of garment leather

ISO 17230:2006 皮革.物理和机械试验.水渗透压力测定

This International Standard describes a method for determining the water penetration pressure of leather.

Leather - Physical and mechanical tests - Determination of water penetration pressure

ISO 17074:2006 皮革.物理和机械试验.阻止火焰水平蔓延性的测定

This International Standard specifies a method for determining the horizontal burning rate of leather. It is applicable to all light leathers but is particularly intended for leathers used in the passenger compartment of motor vehicles. NOTE The method uses the apparatus specified in ISO 3795 but incorporates special provisions for sampling, conditioning and testing of leather.

Leather - Physical and mechanical tests - Determination of resistance to horizontal spread of flame

DIN EN ISO 17228:2006 皮革.色牢度试验.加速老化中的颜色变化

Over time, the surface colour of leather and the leather itself change due to ageing and to the action of the surroundings on the leather. The purpose of the various ageing procedures described in this International Standard is to obtain an indication of the changes that could occur when leather is exposed to a certain environment for a prolonged time. The test conditions to be used depend on the type of leather and its intended use.

Leather - Tests for colour fastness - Change in colour with accelerated ageing (ISO 17228:2005); English version of DIN EN ISO 17228:2006-09

ISO 22288:2006 皮革.物理和机械试验.用革面皮弯曲法测定抗弯强度

This International Standard specifies a method for determining the wet or dry flex resistance of leather and finishes applied to leather. It is applicable to all types of leather below 3,0 mm in thickness.

Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method

ISO 17232:2006 皮革.物理和机械试验.漆皮耐热性的测定

This International Standard specifies two methods for determining the heat resistance of patent leather. Method A makes use of a modified lastometer while Method B uses the "Zwik" apparatus. Both methods are applicable to patent leathers for all end uses.

Leather - Physical and mechanical tests - Determination of heat resistance of patent leather

DIN CEN/TS 14689:2006 皮革.物理和机械试验.松卷、蠕变和松弛的测定

This document specifies a method of determining the bagginess of leather together with its creep and stress relaxation properties. It is applicable to all non-rigid leathers. e. g. Shoe upper leather, upholstery leather, leathergoods leather and apparel leather. Leather is a viscoelastic material and, upon removal of any applied force, only a proportion of the extension observed is recovered. Even some time after removal of the force there is some degree of permanent deformation which is known as the retained set or bagginess of the leather. Due to the nature of the test method described below it is also possible to obtain a measure of the creep and stress relaxation properties of leather. Although the creep index quoted is not obtained via the true definition of creep, it will however provide a valuable comparative indication of this property in leather.#,,#

Leather - Physical and mechanical tests - Determination of bagginess, creep and relaxation; German version CEN/TS 14689:2006

BS DD CEN/TS 14689:2006 皮革.物理和机械试验.膨胀、蠕变和松弛度测定

This Technical Specification specifies a method of determining the bagginess of leather together with its creep and stress relaxation properties. It is applicable to all non-rigid leathers. e.g. shoe upper leather, upholstery leather, leathergoods leather and apparel leather. Leather is a viscoelastic material and, upon removal of any applied force, only a proportion of the extension observed is recovered. Even some time after removal of the force there is some degree of permanent deformation which is known as the retained set or bagginess of the leather. Due to the nature of the test method described below it is also possible to obtain a measure of the creep and stress relaxation properties of leather. Although the creep index quoted is not obtained via the true definition of creep, it will however provide a valuable comparative indication of this property in leather.

Leather - Physical and mechanical tests - Determination of bagginess, creep and relaxation

DD CEN/TS 14689:2006 皮革 物理和机械测试 松弛、蠕变和松弛的测定

This Technical Specification specifies a method of determining the bagginess of leather together with its creep and stress relaxation properties. It is applicable to all non-rigid leathers. e.g. shoe upper leather, upholstery leather, leathergoods leather and apparel leather. Leather is a viscoelastic material and, upon removal of any applied force, only a proportion of the extension observed is recovered. Even some time after removal of the force there is some degree of permanent deformation which is known as the retained set or bagginess of the leather. Due to the nature of the test method described below it is also possible to obtain a measure of the creep and stress relaxation properties of leather. Although the creep index quoted is not obtained via the true definition of creep, it will however provide a valuable comparative indication of this property in leather.

Leather — Physical and mechanical tests — Determination of bagginess, creep and relaxation

NY/T 1164-2006 裘皮.蓝狐皮

本标准规定了蓝狐皮的质量标准、技术要求、检验方法、检验规则及仓储、包装、运输。 本标准适用于蓝狐皮生产、初加工及市场交易各环节的质量检验。

Undressed Skin of Blue Fox

NF G52-001:2006 皮革.物理和机械试验.样品制备和状态调节

Leather - Physical and mechanical tests - Sample preparation and conditioning.

DIN EN ISO 4684:2006 皮革.化学试验.挥发物质测定

The standard deals with the determination of volatile matter in leather.

Leather - Chemical tests - Determination of volatile matter (ISO 4684:2005);English version of DIN EN ISO 4684:2006-02

BS EN ISO 4684:2006 皮革.化学试验.测定挥发性物质

This International Standard specifies a method of determination of volatile matter which is applicable to all leather types. It is not possible to determine the exact moisture content of leather by this method. This is because at elevated temperatures other volatile substances escape and tannins and fats can be oxidized. Some absorbed water may be left in the leather after drying.

Leather - Chemical tests - Determination of volatile matter

ISO 4098:2006 皮革.化学试验.水溶物、水溶无机物和水溶有机物的测定

This International Standard specifies a method of determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter. It is applicable to all leather types. The result obtained by this analysis depends on factors such as: the degree to which the leather is ground; the extraction temperature; the extraction period; the ratio of leather to water. To obtain comparable results, it is consequently imperative that test conditions should be accurately reproduced. In all cases, any ammonium salts in the filtrate are included as part of the water-soluble matter and are then decomposed on ignition. Thus they contribute towards the result for water-soluble organic substances. The concentration of the ammonium salts can be determined in the filtrate separately if required.

Leather - Chemical tests - Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter

ASTM D6016-06(2012) 皮革中可萃取的氮和水测定的标准试验方法

This test method provides the means to determine nitrogen containing water extractable materials such as excess and loosely bound tannins, ammonium salts, and nitrates.1.1 This test method covers quantitatively determining the water extractable nitrogen in leather. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Nitrogen, Water Extractable in Leather

KS M ISO 14931:2005 皮革.服装(毛皮类除外)用皮革的选择指南

이 규격은 모피를 제외한 의류용 가죽의 권장값과 관련 시험 방법을 나타낸다. 이 규격은 또

Leather－Guide to the selection of leather for apparel(excluding furs)

NF G54-201:2005 皮革.服装(毛皮类除外)用皮革的选择指南

Leather - Guide to the selection of leather for apparel (excluding furs).

QB/T 2703-2005 汽车装饰用皮革

本标准规定了汽车装饰用皮革的分类、要求、分级、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于制作汽车座椅套、座/靠垫、头枕、扶手、方向盘套、排挡头、装饰性衬板、里衬等装饰用皮革。 本标准不适用于移膜皮革。

Automotive upholstery leather

QB/T 2704-2005 手套用皮革

本标准规定了手套用皮革的分类、要求、分级、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于用猪、牛、羊及其他动物皮，采用各种工艺、各种鞣剂鞣制加工制成的手套用皮革。 本标准不适用于特殊用途和要求的手套用皮革。

Glove leather

ASTM D2099-05(2010)e1 用马塞尔透水性测定仪测定鞋帮皮革抗流水性的标准试验方法

This test method is intended to estimate the water resistance of shoe upper leather. The flex imparted to the leather is similar to the flex given the vamp of the shoe in actual wear. Note 18212;There is an indication that this test method cannot be used interchangeably for specification purposes with Test Method D2098.1.1 This test method covers the determination of the dynamic water resistance of shoe upper leather by the Maeser water penetration tester. It is applicable to all types of shoe upper leather. Certain waterproof processes can cause contamination of the stainless steel balls. When this happens, visual inspection is recommended. This test method does not apply to wet blue. 1.2 Initial water penetration and water absorption can be measured by this test method. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester