Y46 毛皮、皮革 标准查询与下载

ASTM D1516-05(2017) 皮革宽度的标准试验方法

3.1 This test method is designed to measure the width of specimens before and after they are subjected to various tests which may change the width. A test procedure wherein such measurements could be used is the change in area of square pieces when measuring the resistance of leather to synthetic perspiration solution. 1.1 This test method covers determination of the width of physical test specimens and of regularly shaped units and pieces of all types of leather. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Width of Leather

QB/T 2680-2004 鞋里用皮革

本标准规定了鞋里用皮革的要求、试验方法、分级、检验规则和标志、包装、运输、贮存。 本标准适用于用各种动物皮加工生产的鞋里用皮革。

Lining leather

QB/T 2288-2004 移膜皮革

本标准规定了移膜皮革的产品分类、技术要求、试验方法、分级、检验规则、包装、标志、运输和保管。 本标准适用于经过干法、湿法工艺加工制成的移膜皮革。

Transfer coating leather

ISO 14931:2004 皮革.服装(毛皮类除外)用皮革的选择指南

This document gives recommended values and related test methods for apparel leather excluding furs. This document also specifies the sampling and conditioning procedures of laboratory samples. This document does not apply to leather materials with coating thickness exceeding 0,15 mm.

Leather - Guide to the selection of leather for apparel (excluding furs)

QB/T 1872-2004 服装用皮革

本标准规定了服装用皮革的产品分类、技术要求、试验方法、检验规则、包装、标陆、运输和保管。 本标准适用于用猪、牛、羊及其它动物皮，采用各种工艺、各种草案剂螺制加工制成的各种服装用皮革。软包袋用皮革可参照使用。

Garment leather

QB/T 1873-2004 鞋面用皮革

本标准规定了鞋面用皮革的产品分类、技术要求、试验方法、检验规则、包装、标志、运输和保管。 本标准适用于用猪、牛、羊及其它动物皮，采用各种工艺、各种草案剂辑制加工制成的各种鞋面用皮革。软包袋用皮革可参照使用。 本标准不适用于移膜皮革。

Upper leather

NF G52-012:2004 皮革.物理和机械试验.100摄氏度及以下收缩温度的测定

Leather - Physical and mechanical tests - Determination of shrinkage temperature up to 100 oC.

NF G52-000:2003 皮革.化学、物理、机械和色牢度试验.抽样位置

Leather - Chemical, physical and mechanical and fastness tests - Sampling location.

NF G52-009:2003 皮革.物理和机械试验.静态吸水性的测定

Leather - Physical and mechanical tests - Determination of the static absorption of water.

NF G52-032:2003 皮革.物理和机械试验.表面涂层冷裂温度的测定

Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings.

NF G52-034:2003 皮革.物理和机械试验.伸长度测定

Leather - Physical and mechanical tests - Determination of extension set.

DIN CEN/TS 14494:2003 皮革.化学试验.五氯苯酚含量测定

Leather - Chemical tests - Determination of pentachlorophenol content; German version CEN/TS 14494:2003

BS EN ISO 17233:2003 皮革.物理和机械试验.表面涂层低温龟裂温度的测定

ISO 17233:2002 specifies a method for determining the cold crack temperature of surface coatings applied to leather. It is applicable to all leathers which have a surface coating and which can be easily flexed.

Leather - Physical and mechanical tests - Determination of cold crack temperature of surface coatings

BS EN ISO 17236:2003 皮革.物理和机械试验.伸长度测定

ISO 17236:2002 specifies a method for determining the extension set of leather. It is intended for use on upholstery leather but is applicable to all flexible leathers.

Leather - Physical and mechanical tests - Determination of extension set

BS EN ISO 2420:2003 皮革.物理和机械试验.表观密度的测定

This International Standard specifies a method for determining the apparent density of leather. It is applicable to all heavy leather.

Leather - Physical and mechanical tests - Determination of apparent density

ASTM D5053-03e1 皮革摩擦脱色的色牢度的标准试验方法

This test method is intended for use on any type of leather.1.1 This test method covers the determination of the degree of color that may be transferred from leather to other surfaces by rubbing under wet (damp) or dry conditions, or both. This test method does not apply to wet blue.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Colorfastness of Crocking of Leather

ASTM D2813-03(2013) 皮革物理性和化学试验取样的标准操作规程

4.1 The sampling procedures described in this practice have been designed to ensure random sampling of finished leather and fabricated leather items for physical and chemical tests. Leather is a natural product and as such is subject to extensive variability. The physical and chemical properties vary considerably depending on location on the hide, side or skin from which the test sample is taken. Random sampling of specimens from a predefined location and orientation minimizes test bias and variability. This practice defines these parameters. 1.1 This practice covers the sampling of finished leather and fabricated leather items for physical and chemical tests. The product is grouped into lots that are randomly sampled in such a manner as to produce a representative sample of the lot. This sample may be used to determine compliance of the lot with applicable specification requirements, and on the basis of results, the lot may be accepted or rejected in its entirety. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Sampling Leather for Physical and Chemical Tests

ASTM D6012-03(2013) 测定皮革抗 (渗漏) 色斑转移的标准试验方法

4.1 Bleed resistance is considered to be an important characteristic in leather used to make lined and unlined items that may come in contact with water. 1.1 This test method2 covers the determination of whether leather bleeds (exudes coloring matter) when in intimate contact with wet surfaces, as indicated by staining produced on wet cloth in contact with the leather. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determination of Resistance of Leather to lpar;Bleedingrpar; Color Stain Transfer

ASTM D2097-03(2010) 家具皮革表层挠曲测试的标准试验方法

This test method simulates the flexing received by upholstery leather in service, and correlation with service is believed to be good. Both the resistance of the finish to cracking and adhesion of the finish to the leather can be evaluated. The flexing action received by the leather in this method is more severe than that given by methods for shoe upper leather. The less severe tests have little utility in the evaluation of upholstery leather finishes. This test method is suitable, and has been useful, in research, development, and manufacturing control. It is used as a method of test for specification acceptance. Since this is a subjective test, proper correlation should be established by interlaboratory experience prior to use for specification acceptance.1.1 This test method covers the determination of the flexibility and adhesion of a finish on upholstery leather. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Flex Testing of Finish on Upholstery Leather

ASTM D5053-03(2009) 皮革摩擦脱色的色牢度的标准试验方法

This test method is intended for use on any type of leather.1.1 This test method covers the determination of the degree of color that may be transferred from leather to other surfaces by rubbing under wet (damp) or dry conditions, or both. This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Colorfastness of Crocking of Leather