Y46 毛皮、皮革 标准查询与下载

ASTM D5053-03 皮革摩擦脱色的色牢度的标准试验方法

1.1 This test method covers the determination of the degree of color that may be transferred from leather to other surfaces by rubbing under wet (damp) or dry conditions, or both. This test method does not apply to wet blue.1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Colorfastness of Crocking of Leather

ASTM D2097-03(2016) 装饰皮革饰面弯曲试验的标准试验方法

4.1 This test method simulates the flexing received by upholstery leather in service, and correlation with service is believed to be good. Both the resistance of the finish to cracking and adhesion of the finish to the leather can be evaluated. 4.2 The flexing action received by the leather in this method is more severe than that given by methods for shoe upper leather. The less severe tests have little utility in the evaluation of upholstery leather finishes. 4.3 This test method is suitable, and has been useful, in research, development, and manufacturing control. It is used as a method of test for specification acceptance. Since this is a subjective test, proper correlation should be established by interlaboratory experience prior to use for specification acceptance. 1.1 This test method covers the determination of the flexibility and adhesion of a finish on upholstery leather.2 This test method does not apply to wet blue. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Flex Testing of Finish on Upholstery Leather

DIN EN ISO 17186:2003 皮革.物理和机械试验.表面涂敷厚度的测定

Leather - Physical and mechanical tests - Determination of surface coating thickness (ISO 17186:2011); German version EN ISO 17186:2011

DB15/ 377-2002 皮革毛皮中主要有害物质限定通则

本标准规定了皮革毛皮及产品的术语、抽样和制样，有害物质的限定要求、检验方法和判定规则。本标准适用于各种动物原料皮经加工而成的皮革毛皮成品及其制品。

General rules for limit of the main harmful substances of leather and fur

KS M ISO 15700:2002 皮革.色牢度试验.耐水斑点色牢度

이 규격은 모든 종류의 가죽에 대하여 물방울로 생기는 영향을 판정하기 위한 방법을 규정한다

Leather－Tests for colour fastness－Colour fastness to water spotting

KS M ISO 5397:2002 皮革.氮含量和"皮质”含量的测定.滴定法

이 규격은 가죽의 질소 함유량과 “피질분” 결정을 위한 적정법을 설명하고 있다.

Leather－Determination of nitrogen content and “hide substance”－Titrimetric method

KS M ISO 15701:2002 皮革.色牢度试验.受聚氯乙烯影响的色牢度

이 규격은 흰색의 가소성 폴리염화비닐과 가죽의 접촉에 의하여 가죽에서 폴리염화비닐로 색이

Leather－Tests for colour fastness－Colour fastness to migration into plasticized poly(vinyl chloride)

SANS 316:2002 工业用护掌（皮革和织物）和皮革防护服

Covers the materials and construction of industrial hand protectors (leather and fabric) and leather protective clothing.

Industrial hand protectors (leather and fabric) and leather protective clothing

SANS 4047:1977 皮革．硫酸化总灰分和硫酸化不溶于水灰分的测定

Specifies a method for the determination of the sulphated total ash and the sulphated water-insoluble ash of leather.

Leather - Determination of sulphated total ash and sulphated water-insoluble ash

BS EN 13335:2002 皮革物理和机械试验.由皮革弯曲法测定抗弯曲性能

此欧洲标准规定了测定皮革和皮革成品鞋的湿或干抗弯曲性能的测试方法。

Leather - Physical and mechanical tests - Determination of flex resistance by the vamp flex method

SANS 1869:2001 铬鞣外底革

Specifies requirements for chrome-tanned, wax impregnated, bend outer sole leather.

Chrome-tanned bend outer sole leather

SANS 1873:2001 植物鞣外底革

Specifies requirements for vegetable-tanned bend outer sole leather.

Vegetable-tanned bend outer sole leather

QB/T 2537-2001 皮革 色牢度试验 往复式摩擦色牢度

本标准规定了用毛毡在皮革表面进行往复式摩擦，以确定皮革表面摩擦色牢度的方法。 本标准适用于各类皮革。

Leather color fastness test reciprocating rubbing color fastness

QB/T 2536-2001 毛革绵羊皮

本标准规定了毛革绵羊皮的技术要求、试验方法、分级、检验规则和标志、包装、运输、贮存。 本标准适用于采用各种工艺、各种翰剂，经靴制加工制成的毛革绵羊皮。 本标准亦适用于用羊羔皮、细杂皮等加工制成的毛革。

Sheep leather

EN ISO 13088:2001 羽毛和羽绒制品.填充产品的总质量和填充物的质量的测定方法

Manufactured Articles Filled with Feather and Down - Method for the Determination of a Filled Product´s Total Mass and of the Mass of the Filling

SANS 5618:2001 皮革．乙醚可提取物质

Specifies a method for the determination of matter extractable from leather by petroleum ether.

Leather - Matter extractable by petroleum ether

SANS 5619:2001 皮革中可溶水物质含量的测定

Specifies a method for the determination of the water-soluble matter content in leather.

Determination of water-soluble matter content in leather

NF G52-311:2001 皮革.色牢度试验.耐塑化聚氯乙烯迁移的色牢度

Leather - Tests for colour fastness - Colour fastness to migration into plasticized poly(vinyl chloride).

ASTM D6714-01 灰化湿铬鞣革中氧化铬的标准测试方法(高氯酸氧化作用)

1.1 This test method covers the determination of chromic oxide in wet blue that has been partly or completely tanned with chromium compounds. In general the samples will contain chromium content between 1 and 5 %, calculated as chromic oxide expressed upon a dry basis otherwise referred to as moisture-free basis (mfb).1.2 This test method is specific in that it applies to a sample or samples that are the resultant ash following the execution of Test Method D 6716.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazards are given in Section 8.

Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)

ASTM D1610-01(2013) 测试皮革和皮革制品修整的标准操作规程

5.1 Temperature and relative humidity have an influence on many of the physical properties of leather. Depending on environmental conditions the moisture content in leather may vary significantly. Standardized conditioning in part allows for reliable comparisons to be made among different leather and leather products, and among different laboratories. 1.1 This practice covers the conditioning of all units and specimens of leather and leather products prior to testing and the conditions under which they should be tested. This practice does not apply to wet blue. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Conditioning Leather and Leather Products for Testing